When I try to start the game F1 2010, I get "appcrash" message.
Original title: f1 2010 error msg appcsrash
while trying to start the game, I get an error msg "appcrash" I've updated my direct x drivers and windows, any help would be appreciated thx
Windows 7 service pack 2 ati radeon x 1200 amd athlon 64 dual core. Here are the details of the error
Problem event name: APPCRASH
Application name: F1_2010_game.exe
Application version: 1.0.0.0
Application timestamp: 4 c 766231
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception code: c0000005
Exception offset: 00043387
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
This is another forum with errors on F1_2010 game:
If you have installed Steam.
Hello *, thank you for contacting Steam support.
If you're currently running Vista or Windows 7, please follow the instructions in the following link: title: Windows 7 and Vista troubleshooting Link: http://support.steampowered.com/kb_a...5688-IFHZ-2170
You may also need to manually run the secondary installers required by this game. Out of steam completely. Access your F1 2010 installation folder
(Usually C:\Program files\Steam\steamapps\common\f1 2010\)
Run the following installation programs: ...\steamapps\common\f1 2010\Redist\DirectX\DXSETUP.exe ...\steamapps\common\f1 2010\Redist\OpenAL\OpenALwEAX.exe
Also, install the latest version of the Games For Windows Live software, which can be found here: http://www.microsoft.com/games/en-us...rketplace.aspx
Restart your computer and test the issue. Also, if you continue to have difficulties, please run the following installation program: ...\steamapps\common\f1 2010\Redist\Rapture3D\rapture3d_2.4.4game.exe
Reboot once more and test the issue again. If the problem persists, please fill out these guides: title: this game is currently unavailable
Link: http://support.steampowered.com/kb_a...4595-WEXN-6831
Title: Games do not work after 'Preparation to launch' link:
http://support.steampowered.com/kb_a...6218-USFX-5568
If you still have difficulties, please contact the support team for this title: title: F1 2010 link: http://support.steampowered.com/kb_a...9126-QTJK-9475
I hope this helps.
Tags: Windows
Similar Questions
-
When I try to start the time service Windows, I get a message:
When I try to start the time service Windows, I get a message:
------------------------------------------------------------------------------------------------------------
Windows could not start the time Service Windows on the Local computer.
Error 2: The system cannot find the specified file
any idea please?
The question is similar but not identical.
You can have a look. See if the answer in this thread will help:
http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6bbea43f-5575-4E78-9b52-ac766632bfc2Answered by: Martin - Support Engineer
Date: June 20, 2009. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
When I try to install the 'install Creative Cloud' I get this message "we encountered the following problems: Setup failed in a critical file.» Please try to reinstall. (Error code: 43). I tried so many times and repeat me the same mistake. Help, please!
Please check the resolution:
Concerning
Stéphane
-
I hope that there's enough information in the title area
Hello Johndruck.
Pixel Shader 2 designates a characteristic of the graphics cards. In this case, it seems that the game requires Pixel Shader 2 but does not support your hardware.
If you mention the particular game and this specific graphics card we can know if it is indeed the case, in which it is not that you can do about it. Or if something happens.
If you don't know what graphics card you have to take a look at http://www.windowsresource.net/vista/guides/hardware.php
Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
Original title: when I try to load the game Empire Total War I have a Microsoft window error
Empire: Total War has stopped working
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.Hello
1 did you recent hardware or software changes to your computer before this problem?
2 have you tried the troubleshooting steps to solve the problem?I suggest you try the steps and check them off below.
Step 1: Update the video card driver.
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-linksStep 2: Download and install the latest version of DirectX.
Reference:
How to download and install DirectX
http://support.Microsoft.com/kb/179113Step 3: Check if the problem persists in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135
Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-ViewerYou can also try contacting the seller game to help on this issue.
http://forums.Sega.com/I hope this helps.
-
I get the "Year Error Occurred" message when you try to start the YouTube app on my new Bravia
Hello
My KDL50W800C has an internet connection but when I try to start the YouTube app, I get the message 'year Error Occurred. " Not to be confused with a network error has occurred. It says no network.
Help is greatly appreciated.
Can't tell from your model number, but if it is an Android TV, try to erase the data on the app:
Home > settings > Apps > system apps. Search YouTube from the list, select it, select erase data and confirm.
Restart (just to clear any other issue) - now power press Remote button and try again the YouTube app.
-
When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.
Hey Abdul HamidNagoor,
· Did you do changes on the computer before the show?
· You get the error message?
· What is the brand and model of the computer?
Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
If the problem persists, follow the steps in the article.
How do I recover from a corrupted registry that prevents Windows XP startup
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
-
When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up
When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up. The header says 16-bit subsystem MS_DOS. For example, when you try to start Microsoft Word, the message says:
C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.
I can start the program by clicking on any document in my documents file, however. I know that something is messed up in the registry (we had a bad worm (MS Removal Tool). However, I can't a registry cleaner to open. I used a WinXP_EXE_Fix.reg to try to fix the missing exe file. He has set a number of things, but still will not let me run a registry clean.
Any help?
Hello
Try the following steps:
1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077
2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
-
Rick2425
When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start." Also, I can not restore the system to come and let me run it.
It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.
Hello Rick2425
See the thread below and let me know if it helps thanks.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1
-
Error when you try to play the game: memory access violation
memory access violation
I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".
Your sound card that is more than adequate.
If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.Then restart and reinstall the game.
Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsLet us know if that helps.
Marilyn
-
When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems? Thank you
Original title: frustrated in New York
The problem seems to be the igdumd64.dll:
Fault Module name: igdumd64.dll
Fault Module Version: 8.15.10.1749
Timestamp of Module error: 4a5bdf54The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.
You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:
-
Error 1068 when you try to start the WIA service after the installation of the W7 SP1
Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.
SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.
Hello
Method 1: Try to uninstall and reinstall Epson drivers and related software.
Visit our articles to do the same below:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
http://Windows.Microsoft.com/en-us/Windows7/install-a-programMethod 2: Also scan SFC (System File Checker) on the computer.
http://support.Microsoft.com/kb/929833Hope this information helps.
-
When I try to open a document in wordpad I get this message (microsoftword starter 2010 doesn't open retry or repair the product in the Panel)
all ideas
Have you tried the repair of the control panel option? It's the obvious thing to do. Click Start-> Control Panel-> programs and features. Click on the entry for MS Office and click on modify. You can then select the repair option.
Good luck.
-
Error message: a message session could not be started. Please check your MAPI installation - sending email from MYOB
When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.
How can I solve this problem?
Hi all
I have a workaround which is a little less boring that the patch "restart the PC": If you get the error where MYOB crashes when you try to send an e-mail, open Task Manager (ctrl-alt-del or right click on the start bar), then go to the "Processes" tab and close all instances of wlmail.exe using the button "complete the process".
It seems that this error occurs if you have Windows Live Mail opened when you try and send emails of MYOB. If you then close WLMail after that get the error the process seems to never close, so you have to close it manually. If you send all your emails with closed WLMail MYOB it seems to be OK.
See you soon
-
When I try to download the update of windows I get an error code every time: 802440F.
When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?
@ Evanston only!...
You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article
NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxVERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).
Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.
See also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
http://www.us-cert.gov/CAs/tips/ST05-007.htmlMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Wish I had better news for you. Good luck & achieve before Thanksgiving 2010!
Maybe you are looking for
-
Question on Satellite L50-B-17-V FN keys
Hello I have a problem that affects the function of the special keys of my Satellite L50-B-17-V with Win8.1, given that Toshiba has just introduced the new 1.90 bios, I'm not longer automatically, but pressing the fn key before, I was in the service
-
Satellite 1000-Z2 - replacement of the FL inverter
Anyone know where there are instructions for the replacement of the FL on a Satellite 1000-Z2 inverter? Thanks for any help.
-
Satellite A100-178: I can reinstall the older version of Bios?
I updated my Bios as it was available (5.10). The update went well and I had no problem for it. Since then, I started to get a daily error messsage on digital USB card from Pinnacle. The error is something about the limitations of outdated peak curre
-
Hi all I'm setting up a submarine Simulator in labview I want to understand. · A gauge, showing how the submarine currently is deep. · A graph showing the depth with time. · A pressure gauge indicating the current pressure on
-
Windows Mail: this file does not have a program associated with it
I can receive and open the email, but when I click on anything in the email a box comes up which says "this file does not have a program associated with it for performing this action. Create an association in the set associations Control Panel. Don't