When I turn on computer get "" NVIDIA Boot Agent 244.0538__PXE - E61: Media Test Failure, check cable ".

Similar Questions

• Portege R100, PXE - boot problem - E61:Media Test failure, check cable

  My portege r100 4004GAH original hard drive has had some problems recently, so I decided to replace it with a bigger 4006GAH. Specifications, it seemed that it would be appropriate.

  So I tried to install standard windows top. Unfortunately as I soon discovered that didn't work and lead to BSOD. I looked online and remembered that I had in fact to use the recovery of three discs. Fortunately for me I still had the freshly sealed and I've also owned a combined remarkable Targus CD drive supported. If in the three discs are gone. All seemed well and after that the last drive ended, I was asked to remove the disc. The laptop has rebooted and then gave me the

  PXE - E61:Media Test failure, check cable
  PXE - M0F: Exit Intel PXE ROM
  Insert system disk
  Press a key to continue...

  I thought it might be in the order of start, but verified that and it seemed right. HD was first. I also changed the order and the same error came.
  I thought while another component of my laptop may be broken. So I put my old hard drive in. It started fine.
  The next thought that the new hard drive was defective.

  Fortunately, this is not the case. Because when I used the recovery disks not only heard disk hard turns to the top, but the hard drives were detected and recovery installation displays the correct memory size.

  I'm completely stumped on hat w what is the problem. Any help would be appreciated.

  It is not easy to say what the problem is but you said the Portege started fine with the old HDD. So I think that there is something wrong with the new.

  In your case I test the HARD drive with a special tool like Drive Fitness Test. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  In addition I am interested in what you have the same problem with a Microsoft installation disc if you have one.
  So try if your HARD disk has no errors.

• Tecra 9100: Media Test failure - check cable then turns off

  Hello

  I have a Tecra 9100 and I got it at low cost and hoping to make it work for my son to do his homework on but its got a problem.

  First he came without a hard drive (on order) then when I turn it on I get + media test check the cable failure then it stops.
  I ve disabled boot from LAN and set the default Bios and tried to boot from the CD drive that starts to install ok (I know he won t get far because I ve without HARD drive)

  But he died just completely sometimes in the beginning, sometimes at half way.

  One can shed some light on the subject.

  Thanks rob

  Maybe its overheating? Search for dust in the radiator. You can blow the dust using a can of compressed air.

  Also test the memory. You can get memtest www.memtest.org and put it on a floppy disk or a CD.

• PXE - e61: media test failure, check cable__pxe-m0f: exit pxe rom__no bootable device - insert boot disk and press any key

  My boyfriend knocked over a glass of soda on my laptop and it had the same error message for always, I'm not terribly computer savy, but 'shop' means they want 200-275 to fix! Help!

  It would seem that you have a hardware problem, caused by the spilled liquid.

  Hardware issues are beyond the scope of these Forums.

  I suggest that you take it to a reputable repair shop, computer room.

  See you soon.

  Mick Murphy - Microsoft partner

• MY COMPUTER TURNS ON DOESN'T WORK, I GET THE FOLLOWING CODE__PXE-E61 ERROR: MEDIA TEST FAILURE, CHECK CABLE__PXE-MOF: EXIT INTEL PXE ROM__ERROR LOADING OF OPERATING SYSTEM

  MY COMPUTER WINDOWS XP PROGRAM QUIT, TURNS ON THE COMPUTER, I HAVE INSERTED THE WINDOWS XP DISC INSTALLATION TO GET GOING AGAINST AND RECEIVED THE ERROR MESSAGE FOLLOWING:

  PXE - E61: MEDIA TEST FAILURE, CHECK CABLE

  PXE - MOF: EXIT INTEL PXE ROM

  ERROR LOADING OPERATING SYSTEM.

  It attempts to boot from the network adapter. Check the BIOS settings, check hard disk cable connections.

• PXE - E61: media test failure on 3500 Portgege but can't get into the BIOS

  I canoe get into my BIOS menu.
  I tried all the keys (ESC, F1, F2, delete, etc), but then I get the message: "PXE - E61: media test failure, check cable for.
  "PXE - M0F: PXE ROM of output. I tried everything, but I can not even access the BIOS menu.

  Turn on the laptop and hold ESC, then press F1 when prompted. By pressing F12 at startup should give you a start menu. (It's in the user manual)

  The PXE error means its trying to boot from the network, because it can not find an OS on the HARD drive.

  Test the HARD drive by using a HARD drive test. The Advanced test in Hitachi DFT is good. (google is your friend)

• Cannot boot from recovery CD - error: PXE - E61: Media test failure

  Recovery CD (Windows XP home Edition) cannot start the Toshiba satellite A40 Model # PSA40E-0EWDE-AR (SA40-261), whenever I try to Boot From recovery cd I get this error:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  but when I boot from any other cd (windows ME, WIN 2 K, WIN XP Pro...) everything is ok.
  Any clue? Help me please
  Thank you
  Mesha

  Hello

  It seems that the player is unable to boot from the recovery CD and the switch to boot from LAN.
  The error PXE - E61 message because the LAN cable was not connected and the laptop is not able to find a source of network boot

  I think you should check the recovery CD and perhaps you will need a new

• Re: Satellite L350: media test failure - no bootable device insert boot disk

  I just started a new Sat L350 upward and I can not go beyond the second page that says; Media test failure and no boot device, insert the boot disk and press any key.

  I have no disc and I'm stuck,

  Help!

  Hello

  This error message appears because the BIOS didn't not find a bootable device containing an operating system.

  What of the HARD drive? Is it recognized by the BIOS?
  Check in the BIOS settings; Press ESC and F1 to access the BIOS.
  There, you should check if the HARD drive (all details of the HARD drive should appear) is recognized.
  If this isn't the case, then it means that your HARD drive is dead and so you cannot boot from the HARD drive.

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn my computer I geet an error message "bgedit.exe". How can I fix it?

  When I turn on Mycomputer, I get an "error bgedit.exe message and a white screen."  How do I fox this?

  Hi Gerard,.

  The error is perhaps rather bcdedit? If so, take a look at the following:

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  If this isn't the case, please specify with the full error message.

• My selected themes disappear when I turned off the computer, I have to add them when I turn the computer back on. I made sure that it is set to allow the modules.

  Just in the last week or so, this has happened. I had several themes to select from, all of them are listed is no longer in the list with the exception of the default theme of list drop-down appearance. Yesterday I made I'm fixed to allow add-ons. It was the same story this morning, the appearance was back to default and my themes had disappeared. If I stay connected to the internet my themes remain the same. I have no problem with the preview of themes they will not just stay put when I turn off my computer. This is the only problem I have encountered since I've been using Firefox.

  You will need to check the line user_pref ("lightweightThemes.usedThemes", < pref data >) to see is something changed in the data stores installed light themes and compare this line in the current prefs.js file with the corresponding line in the backup of the prefs.js.

• Password - when I turn the computer into a big red box with the words "Enter your password" appears

  When I turn on the computer a big red box with the words "enter your password" arrives, we cannot go into the user explains, I forgot the password. We can't still press Delete to enter in the configuration because it is in the Enter password screen and can't live without her.

  If anyone can help in this matter.

  Kind regards

  Dennis

  Hello

  Contact the manufacturer of the computer to this topic as it seems to be a BIOS password forgotten

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Security Essentials works very well after installation, but when I turn the computer off it does not start at the top. That you uninstall that reinstall. Who is wrong?

  Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.

  Hello

  Did you change your computer before this problem?

  A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.

  You may need to use a cleaning tool to remove your prior security software:

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.

  http://answers.Microsoft.com/en-us/protect

• _ I organize how I want them, but when I turn my computer and return what they aren't where I left my desktop icons. How can I keep them I would like them?

  I organize my office the want it and when I turn on my computer once again, they aren't where I left.  How can I make them stay as I would like.

  I organize my office the want it and when I turn on my computer once again, they aren't where I left.  How can I make them stay as I would like.

  You have a checked Auto Fix?
  Right-click on the open space of the desk top > view > uncheck auto arrange.

  t-4-2

• When you turn my computer to get on the desktop windows stops before and an application error pops up that is described below.

  Lsass.exe - application error

  x application failed if initialize properly (0xc00000005) click on OK to close the application
  the OK button is less

  I tried many ways to restart the F8 advise such items that start windows normally, know last good configuration, safe mode and nothing works.  It happened for about 12 hours.  the computer works fine until what happens... not sure if a virus has infected my computer or not.  When you click OK will appear dark and the mouse works but nothing else is running or change.

  sbdci,
  If you are able to boot mode safe mode with command prompt or start from a XP CD to the recovery console and run the following commands.

  Chkdsk /r

  sfc/scannow

  Also if you go the Support technique Microsoft and search lsass.exe it will give a list of articles on the issue.  There are many elements that interact with this file, then you may want to look at the search results to see if any apply to your situation.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.