When I turn on my pc says floppydisk (s) fail (40)

Similar Questions

• Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Hello

   

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Change the boot order in the BIOS settings:

  See the following steps:

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

  Warning: some manufacturers use F10 for recovery of the system.

  (b) glance to "Drive Configuration", "Boot order" or similar

  (c) check the second drive the first boot device CD/DVD and hard drive.

  (d) to save the settings and exit.

   

  Method 2:

  Step 1: Trying to boot into safe mode and see if that helps.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• I installed After Effects, and he asks me to update. When I try to update, it says simply: "Update failed."

  Recently I got the free trial of After effects for my PC, and I had it completely installed. After that, I had to date for some reason any. After the update has been launched and I had to wait a few seconds, he just gave me the message: "Update failed." I clicked on "Learn more" and got more information: download error. If please retry to try again or contact customer support. (49)"for some reason, I can't find After effects itself on my computer, so it seems that I have to date before I can actually start using it. Thank you for reading, please help me with this question.

  Navigate to C: > Program Files > Adobe > Adobe After Effects CC 2014 .

  Application of after effects CC 2014 launch.

  Click on the menu help and select updates and check.

• When I turn the windows firewall of it says that I have no firewall when avasts firewall is enabled

  original title: firewall

  I activated the windows firewall and I have avast internet sercurity silent firewall but when I turn windows firewall it says I have no firewall when avasts firewall is enabled is it ok if I let both on

  Do not use two firewalls at the same time. An exception would be a router with a built-in firewall and a normal firewall.

• Hello, when I turn on my imac it says that the keyboard is not connected. It is however a wireless keyboard. What can I do?

  Hello, when I turn on my iMac it says that the keyboard is not connected. It is however a wireless keyboard. What can I do?

  Hey scjane, take a look at this topic Support of Apple. It's been archived, but I think it's just for OS X 10.7...

  Apple wireless keyboard: difficulties in matching the process - Apple Support

• Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

  Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.

  original title: compaction of the database messages

  Hi Kathy,

  Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.

  Mike

• When I turn on my computer, I get a warning that says missing entry: entry Rundll.

  When I turn on my computer, I get a warning that says missing entry: entry Rundll. What is c? What should I do?

  Hello

  You did changes to the computer before the show?

  Method 1:
  Step 1: Check if the problem occurs in safe mode:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode, and then perform a clean boot and check:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:
  Run the sfc scan and check if there are any file system corruption.
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3:
  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• When I turned on my PC yesterday I got a Windows "in normal search" box saying Windows Product Activation.

  Windows product activation

  When I turned on my PC yesterday I got a Windows "in normal search" box saying Windows Product Activation. Given that Windows has been activated on this computer the hardware of the computer has changed significantly. Because of these changes, Windows must be reactivated in 2 days. You want to reactivate Windows now?

  My computer has been updated there but nothing for over 2 years. I tried the virus checker & everything looks OK. Is this true? Should I wake? I am running Windows XP.

  Yes, you must activate as soon as posible!

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• When I turn on my computer, it says NTLDR is missing.

  When I turn on my computer it says loading PBR for descriptor 2... fact.

  NTLDR is missing.
  Press ctrl + Alt + Delete to restart, but without success. What is the problem and the solution?

  Read this http://support.microsoft.com/kb/314057

  http://support.Microsoft.com/kb/315261/

• When I turn on my computer all that happens is I get a message on the top left corner of my screen saying NTLDR is missing. (what is NTLDR)

  When I turn on my computer everything that happens is that I get a message on the upper left corner saying THAT NTLDR is missing, press control, alt, Delet to restart

  Hi maryo'carroll.

  · What is the full error message that you receive?

  · Do you remember all the recent changes on the computer before the show?

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  You can check the links below: year NTLDR or NTDETECT.COM not found error: http://support.microsoft.com/kb/555304

  Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder: http://support.microsoft.com/kb/320397

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Hi I have a new monitor but when I turn it on it turns on but then disappears and the middle of it, he says display something cannot get the video mode so u can help me change

  Hello

  My name is Karen, I just got a new monitor used, but when you turn it on, it turns on, but then you can't see something that he disappeared and in the middle of the screen it says u can not display this video mode, your help would be great thanks.

  Hi Karen,.

  Welcome to the Microsoft community. According to the description, you are not able to get the display on the monitor.

  ·         What is the full error message?

  I'll help you with this problem. I suggest you follow the steps in the article.

  Troubleshoot monitor and video card

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• When I turn on my PC and see section password, I type in, and a box at the bottom saying information unverified user or something like that. But, it opens in safe mode without problem, please help.

  PC goes to the password box when I turn it on, but it says it cannot find my user information. But, it will open in safe mode by using the same password. Help

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• All of a sudden my computer when I turn it on says Boot Device not found.

  OT:Boot Device not.

  All of a sudden my computer when I turn it on says device not found Boot, please install an operating system on your hard drive, hard Drivr - (3F0), F2 System Diagnostics. My cd/dvd does not work, but I have a flash drive and an external hard drive with the recovery on this disc but it does not start similarly access flash or external. F10 boi configure options to no effect. Help me please

  Hello

  Since then, will not start to any device, it's a hardware problem. If you need the help of the
  Manufacturer of the system or a real computer store (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have two computers when connected to a hub, when I turn the two, I get an erroe message that says IP address conflict

  I have two computers both hooked up to a junction, when I turn the time I get an error message that says IP address conflict, can you please help?

  Hello

  What other network devices are connected.

  If it's only two computer and a hub, you will need to assign the computer with IP static.
  http://www.howtogeek.com/HOWTO/19249/how-to-assign-a-static-IP-address-in-XP-Vista-or-Windows-7/