When I turn on the PC my screen goes to sleep no signal input.
When I turn on my PC (HP Media Center m7690e CTO) looks like it is starting up, but I don't see anything on the screen because the monitor does not receive a signal. Please inform me of what to do to solve this problem.
Hi Tania, you could try to remove the discrete video card and connect the monitor to the integrated VGA port and see if you can get a signal to your monitor.
You may need to remove a lid on the built-in VGA port to connect the VGA/SVGA cable.
If the monitor works normally, he would check that the discrete video card has become defective.
Here is the link for your motherboard specifications.
Tags: HP Desktops
Similar Questions
-
When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.
The iPhone's battery is fully charged? Otherwise, load it, and then try again.
If it is busy, go in recovery mode as explained here. You may need to try to get into the mode of recovery once more to succeed.
If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports
-
Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))
Serial number C02FD2CPDF8V
-
White screen when I turn on the Satellite M50
I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.
It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?
Thank you
Hi Rachel
Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)
Have you checked if the graphics card driver update could solve the white screen issue?
If not, try to download and install the latest graphics driverYou second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.
-
When starting my computer it starts to turns on then shuts off when it gets to the Dell logo screen.
How can I fix?
HelloTry the methods in the links below and check if it helps.
Windows XP restarts unexpectedly or restarts when you shut down the computer
http://support.Microsoft.com/kb/320299Windows XP stops and automatic restart problems
http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx
I hope this helps. -
Original title: bad start.
On May 15, 2013, I was prompted to download 8 updates from Microsoft. Since then when I turn on the computer, it does not show my office. It comes with a white screen. The only way to see the desktop is at the stop 'wrong' to turn off the power to the computer. Then I reboot, it just asking if I want to boot up normally, I say Yes and all is well on the office. Seems related to downloads of May 15, 2013. Any ideas?
Hello
Method 1:
I suggest you to select last known good Configuration in Windows Advanced options and check if it works.
To do this:
a. restart the computer and press the F8 key for about four to five times.
b. you will see the that last known good Configuration in the Advanced Windows options.
c. Select last known good Configuration and press enter.
Method 2:
See the article and check if that helps:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.
Note: when checking your drive hard for errors, if bad sectors are found, it tries to repair this sector and if all the available data may be lost.
Let us know if it helps.
-
How do you reposisition the toolbar background down
Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:
My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?
You say "toolbar." Do you mean the taskbar?
Although by default, the taskbar is displayed on the bottom of the screen,
It can be on any of the sides on what you prefer. To move any
side to side, simply click an unused portion and drag
where you want it. Don't forget to click inside it, not on the edge.
by clicking on the edge and dragging will resize not move.If it does not move, it can be locked. In this case, right click on it
and uncheck "Lock the taskbar", then try again.Moreover, with the screen monitors wide today, I prefer the taskbar
on the left or the right of the screen. I think that allows a better
use of real estate than have it at the bottom of screen.
Ken Blake, Microsoft MVP -
Original title: when I turn on the computer.
the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.
Hi Cjdaniello,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
When I turn on the Tower, sometimes, I get the password screen, but not always. 0085 error is on the screen
Hello LindaDearborn,
1. don't you make changes to the computer (software or hardware) before having this problem?
This problem may be related to hardware like your CMOS could be altered. If the problem persists, you can contact your computer manufacturer to check if there are any questions related to hardware components.
Thank you
Irfan H, Engineer Support Microsoft Answers -
I have a HP Pavilion with Windows Vista. Friday night, I restored the computer to the factory settings. After doing what he started back to the top as usual and was very good. I shut down my computer Friday night and then Saturday morning, when I turned on the computer screen to start Recovery came and when throught he process of trying to find errors and found nothing and then gave me a message at each stop or do a system restore. Does anyone know why it would start this resumption of start after that I just restored it? I'm ideas... Please help.
http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au
You restored your computer for some reason any.
And now you have problems after using the HP recovery process.
It seems to me that you might have another problem inyour computer.Problem with HP Recovery Process(during or after), contact HP.
It's Recovery process HP, not Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
In windows 7, how to make firefox automatically starts when I turn on the pc. ?
In windows 7, how can I make firefox starts automatically when I turn on the pc
Start menu-> startup folder-> shortcut icon Firefox drag in the startup folder.
If you don't have a startup folder in the Start Menu, create a new folder named "Startup" in the Start Menu-> shortcut icon Firefox drag in the startup folder.
Check and tell if its working.
-
I'm not sure what the name of the product is a don't know if it's the 32 or 64 bit, but when I turn on the computer, it pops up with an agreement that says enter current password one I tried some it could be a TI repeat me password verification failed... fatal error... missed are CNU9440PW9
Hello
Enter e9lovv12do (3rd character is a lowercase L)
Kind regards
DP - K
-
pop up when I turn on the top of the Tower
c:\users\susan\appdata\local\temp\ct3153924\plugins\tbverifier.Dil this pop-up comes up when I turn on the laptop that says it can't be found. I have a hp Pavilion dv7-6c43cl entertainment pc. It has windows 7.
Hello
The return of the pop ups is not good.
The programs AdwCleaner and Junkware cleaner becomes obsolete over time. HitmanPro and MBAM update.
Let me know if you have the time and if you are ready to troubleshoot this yet and if you have time - I can check it for you. You can also send me a private message:
suz60 wrote:
2 other pop ups came when I turned the computer back on today. I went through the same process and they are gone. I have to leave the programs downloaded to my computer or if they become obsolete? I've heard too many antispyware programs cause the computer becomes slow.
-
I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.
HelloIf you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042cI hope this helps you.Brian -
I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?
I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespaceD: 74.2 GB with 70.6 freespaceThese are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WISo I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40I hope that makes sense to someone, any help gratefully received!As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
I can't cancel my free trial 1 month!
When I got the trial version I tried to cancel the renewal but he me returned to the home of Microsoft and when I tried to change the payment and a mistake jumped that there has been error (9060-[2]-f5134b26-9d33-4eef-9b58-8451a779bbb2) I don't know
-
I can't connect my QO55NA Hps PC to my sony walk via bluetooth.
I can't associate my sony walkman Nw - ZX2 with my pc HP 23 QO55NA. The number of matching on my walkman and PC game but when I press pair I get the message incorrect password key. Could someone help please? WiFi is good thanks in advance.
-
Window / folder size, location, & cache error display. Vista Ultimate 64
Hello I had this problem before and only way I fixed it was a reinstall, but I really don't want to go that far. Essentially of minute-to-minute my vista ultimate 64 keeps forgetting each size of the window, the place and the display mode. If I put a
-
Opening Vista, everything went my program that I added, my photos, documents, music, office is completely original with nothing I've added yet accessible, how can I access these things?
-
Hello I've implemented the joystick support, but a segmentation error occurred when calling my discoverControllers function. It's the same as in the gamepad sample (which works fine). If I do not connect my controller series steel initially and conne