When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes

Similar Questions

• My compaq hp sr5505f wit win vista family premium crashed

  My compaq hp sr5505f wit win vista family premium crashes a moment it start windows I get a blue screen saying Startup Repair cannot find or solve the problem, what can I do to get windows to start. It does not recognize my backups and vista came preinstalled helps someone ive tried AFAIK?

  My compaq hp sr5505f wit win vista family premium crashes a moment it start windows I get a blue screen saying Startup Repair cannot find or solve the problem, what can I do to get windows to start. It does not recognize my backups and vista came preinstalled helps someone ive tried AFAIK?

  Call the manufacturer Compaq...
  1. ask a set of recovery disks. The overall cost is minimal. It is worth the money several times over.

  2. at the same time, ask to speak to a technician. Ask technology to teach you how to access the recovery of your computer partition and also how to use the restore system ypur partition.

  Note: you will lose all files and programs that you have installed. Save them if you can. If this isn't the case, you will need to start over from scratch, after you restore the system.

• Clean install of Vista family premium ends by Jordi screen

  I have Acer Aspire 5680, who had family Vista premium sp2 and I was updating the drivers when the black screen. I rebooted, but even then restarted in safe mode. Everything is OK. restarted in safe mode with network, black screen. I have advised me to get the recovery disk, I did so, but after installing all the files and configuration of windows, once more black screen.

  I reformatted the drive C: and tried again. So currently I have windows Vista HP on the C: drive, but I couldn't access anything whatsoever. I noticed a lot of similar situation, but I can not even in the BACK to check the registry.
  
  
  HELP Please

  Hello

  ·           Are you able to boot to the desktop after reformatting C: drive?

  ·           How are you trying to access the C: drive?

  ·           What is the exact error message?

  Step 1: Disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start. If you have several empty map, then remove one and then check what is happening.

  See also: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• Installed Windows Vista Home premium sp2 by using the recovery disk, need to activate product key

  Hi-

  I recently partion on my computer hp laptop and installed windows vista family premium with the recovery disk I got with the laptop I have this laptop for about 4 years, I have the product ID-89578-oem-7332157-00204. If possible can I get the product key to my email * address email is removed from the privacy * because that's what I was told by hp when I asked them why they said that my warranty is over, but my windows cd must be functional and ask microsoft. If you could really help me, I really need because I am a user of autocad as a computer architect, it's the only thing that I have money on working hard.

  Hello

  the HP recovery discs do not normally require an input key product on your part

  It's a good idea to always write it down in a safe place and away from the computer

  Unfortunately, these stickers wear away very easily

  and good luck with it

• Problems after doing a clean install of Vista Home Premium and service pack 2

  I see that others have the same problem as me, but there is no way to comment (that I can see) on the thread I've read.  After a lot of problems, I did a clean install of VISTA Home Premium (came with my Dell PC) and when I installed service pk2, all of the same problems that led me to do a clean install appeared.  I can't the computer to recognize and install the keyboard and the mouse of the blue tooth. (Don't tell me to contact the manufacturer, because they came w / the computer and say "Dell" on them!)  He told me that the enumerator does not work.  Then I launched Quicken, and when I tried to save a registry check for print, he gave me the msg "Quicken launcher has stopped working".  He was a key reason I did a clean install.  The only improvement is that I can at least open Quicken, which he would not let me do before.  How to uninstall service pack 2?

  http://support.Microsoft.com/kb/948537

  How to uninstall Windows Vista service packs as a troubleshooting step

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• Im going to install Windows 7 pro, MSDN AA school. I have on my laptop Win Vista Home premium OEM. Is it possible to install this

  Win 7 install on Vista oem laptop computer

  Hello. Im going to install Windows 7 pro, MSDN AA school. I have on my laptop Win Vista Home premium OEM. Is it possible to install this, when all my drivers and other stuff for laptop is on the OEM vista recovery disk? So my laptop limited only the preinstalled Vista OEM?

  Hi Lukas.

  In many scenarios, the drivers Windows Vista will work perfectly under Windows 7.
  You should not have problems their site installation:
  http://support.ASUS.com/download.aspx?SLanguage=en&m=M50SR&p=3&OS=

• Windows vista family premium allow hotmail attachments sent or install driver Canon G-3.

  My windows vista family premium does not allow me to send an attachment with hotmail and more will let me install my driver of Canon G-3 card. Is there a way to get around this or do need me to trash this almost-new laptop? Thanks.TC

  Hi Victory99,

  A. What is the attachment?

  B. This is the first time you install this driver on this computer?

  C. How can you try to install the driver?

  Answer back the details.

  For your question about hotmail, you can post your queries in the windows live forum.
  http://windowslivehelp.com/community/

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have a Windows Vista family 32-bit premium install windows vista Home premium. Now I have no sound.

  I have a family vista premium 32-bit install windows vista Home premium. now I have no sound

  I have a family vista premium 32-bit install windows vista Home premium. now I have no sound

  Huh?

  Try to understand, taking the repeated mention, I guess you're saying that you have Windows Vista Home Premium (32 bit) and you do not have any audio.

  Have you spent at the web page of the manufacturer of your computer support and their section downloads & drivers and got the last audio/HiFi drivers for your specific hardware?  They are those who produced and load of the equipment.

• How to make a Win Vista Home Premium PC to operate in "XP Mode"?

  Hello

  My Win Vista Home Premium PC cannot 'see' my Canon Lide 30 Scanner or work with my Canon printer i865. Install the software and drivers on the provided disks not even because of "compatibility issues".

  For this reason the "updates available" on the Canon site (for applications and drivers on the disks) only will be not installed because 'old' versions are not on my pc.

  My pc can 'see' - if that is the right word - my printer in settings, but no further acknowledges that this, and even when the printer is turned on it will not even try to print anything.

  If I can still understand how to get the Vista pc to "run in xp mode" - assuming there is an 'xp mode' for Windows vista to use - this will allow my computer to use the printer and scanner.

  There is nothing really wrong with the printer or scanner while they worked fine with the XP pc.

  Software compatibility problems are more precisely to do with two pilots and the ocr software for the scanner and ALL the drivers and the software of the printer.

  I hope someone can help because I don't want to have to get a different printer/scanner (or upgrade to Win 7 - will this regognise OS my printer and scanner?)

  These options are all too expensive.

  Thanks for any help

  Bob

  Hello Bob,

  Compatibility mode is supposed to help eleviate problems not to cause even more problems :-)

  You can actually get some decent printer/scanner price FRO reasonable combinations of our days. You could try (if in the United Kingdom) is Wilkinson (Wilko) stores; W.H.Smith; and Ryman.

  Another alternative is to dual-boot your server (assuming you have aretail copy of XP). This invloves XP install on another partition on your hard drive. The only drawback is that you would have to boot XP to use your printer (assuming that you keep your current).

  I currently have a brother printer copy Scanner that I bought the Ryman stationery, a few years ago. I only paid about £50 for it at the time. My only problem with the brother machine is that there is no way (on my model in any case) to turn the printer off cleaning option. As the PC and the printer are in my room the printer starts always clean at about 04:00. It is not fun to be surprised into a deep sleep by strange noises coming from the printer :-)

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Vista Home Premium boots with black bands on the sides of the screen and features limited after d/l-ing Windows updates

  Hello

  My Dell Inspiron 530 has recently started having problems starting. When I turn it on regularly, Windows Vista Home Premium starts with black bands on each side of the screen and your desktop extended / enlarged which does not display the start menu or the taskbar. I can navigate in the Panel, but when I click on the resolution of the screen, nothing happens and I'm unable to change the screen resolution. When I use CTRL and the mouse scroll wheel, I can reduce the size of the desktop icon, but the taskbar, nor start menu appears on the screen. I noticed that I can't start programs when the computer is in this State as well.

  I think that this problem started after I downloaded a game from 3 updates of Windows, but I do not know what updates they were.

  I am able to start safe mode and the office fills the screen normally. I don't know what steps I can take mode without fail to solve the problem of normal startup, however.

  Please let me know I you a glimpse into this situation because it is extremely frustrating. Thank you very much for your help!

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• SP1 or any windows update not install (Windows Vista Home Premium)

  I'm trying to update windows vista family premium machine SP1 so I can access our company RDWeb access, but both windows update and standalone installer fail.  Tried each option support, including Mircrosoft correction tools does not.  Help, please!  In microsoft update, it crashes just to 'download' scene at 0%.

  Hi JohnnyT,

  You can try the troubleshooting provided in the following steps to solve the problem.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Let us know if that helps.

• Pure install Win Vista x 86 HP KB2079403, KB2479943, KB2536275 (fail 0x800B0100) and KB2536275 (not 0x8007065E)

  Clean instal Win Vista x 86 HP on new SSD now in SP2. The material is a Medion Q6600 on mother MSI7366 and NVidia GeForce 9300GS map.

  Will not install KB2079403, KB2479943, KB2536275 (fail 0x800B0100) or KB2536275 (not 0x8007065E).  Suggestions how to proceed?

  I tried each individually - how know one gives what error.

  Run Update Readiness Tool and it says everything is OK. You run MS Baseline Security analyze and downloaded packages individual but can not understand the correct syntax to invoke manually by hand using pkgmgr. I'm stuck with a new installation of Vista precarious missing 4 critical fixes :(

  I could go back and start from scratch, but I think I'll finish exactly in the same place again. Have also tried AV scans of bootable CD made on another system of trust and found no evidence of malicious software with three different products.

  Is it possible to get the best diagnosis of update of windows beyond "failed with unknown cryptic error."

  Any ideas what these patches have in common, which causes them to fail on my kit?

  Thank you

  Martin Brown

  Thank you very much! These well made the case.

  I had not had as much as to put on an AV so that it was not to blame. I have no idea why Windows Update had taken against these specific fixes - they work OK on the hard drive.

  They all performed successfully, according to the newspaper.  But I came to be stuck with a 'respect' in the automatic mode of updates for the last KB2536275 tag applied. He thinks that the patch should always be applied (and running it still does not work).

  Correction - it takes the system a heck of a lot of time to notice that the patch is applied and removed from the list (at least 2 reboots and the time it took me to write this letter) to do. Now, everything is good on the SSD and a nice green checkmark shows that there are no outstanding update!

  Thanks again it was exactly what I need.

  BTW How did you find these .msu files? When I went before all I could find were cryptic and opaque. CAB files with names absolutely inpenetrable, my question at the beginning was to know how to apply them as pkgmgr syntax is not really obvious from the help page.

  They are much more user friendly they are autonomous and run after the download.