When putting the computer to sleep and then attempt to wake the computer, it has been turned off.

Similar Questions

• laptop not having not the portable printer after that computer settings has been turned off

  I have a problem with my laptop and my printer after I connect to the WIFI printer. It will work if it was attached to the printer, but as soon as I turn it off the setting have disappeared. My laptop works on WP7 and canon mg5200 printer. can someone help me.

  Hi Phil,

  Have you installed new software or hardware before the show?

  It seems that printer drivers could be exceeded and must be repaired or updated. We will analyze and identify the cause of the problem.

  You can run the printer Troubleshooter and update the drivers of the material provided.

  Solve printer problems

  I could not locate the exact model number you have provided. If we're not the printer model number, you can choose one that fits in the list. If the printer model number is the same and that you did not find the driver, then we will have to install the driver of a similar model.

  You can see this article from Canon.

  If the problem persists, you may need to contact Canon support for more information.

  Hope this information helps. Response with status so that we can help you.

• Airport Express do not work when the mac has been turned off

  I plugged our mac mini and the Airport express separately to the internet via a network hub. When I turn off the green light on the airport Mac Orange and blinks. The internet connection disappeared.

  Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

  Post a screenshot of the express installation of airport utility.

  I plugged our mac mini and the Airport express separately to the internet via a network hub.

  This seems odd... What is a network hub? They went to fashion 20 years ago. Do you mean a switch? Real model number please.

  What model is the express?

  Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

  Plug the Express directly on the main router... and implemented in Bridge mode and create a wireless network. That's the way it should be installed now... but this 'hub' could be a problem.

• Podcast OGG resume problems when the device has been turned off and on again

  Even if the rocket + is listed as support AAC, it seems it does not support AAC files over a certain length, otherwise some file size.  (Someone, is it a value of its own thread?)

  For this reason, I need to convert some podcasts to another file format before listening.  MediaMonkey standard appears to limit MP3 conversions (but I love the software otherwise) so I thought that I would like to convert it into OGG instead (and OGG seems to have a better rate of compression than MP3 anyway).

  I found it by listening to these podcasts I can pause successfully to create a restore point, and when I come back, it takes up very well, as long as the device has not been driven off the coast between the two.  If the unit has cycled and turn it back on, when I come back to try to resume, it tries (he lists even the index of screen time) but then says "no file type supported" and fails to resume.  I tested on my old Fuze and do not have the same problem.

  Others experiencing the same thing?  I want to make sure that if it is just a simple bug of Sandisk is aware of this and can provide a fix in a future update.

  BTW, I'm using firmware 1.32.00 (latest as of this post).

  This seems to have been fixed with the latest firmware.

• Try to reconnect the file history and then try to restart it, it says has been disconnected.

  Original title: Ihave even question rereconnecting windows player 8

  I tried to re connect my history of file player from what I've read, will reconnect the file history.  you try to restart it, it says has been disconnected. How can I reconnect it them. has the red x on the icon

  Hi Larry,

  1. What is the full error message that you receive?

  2. you try to connect an external USB driver for backup?

  You may receive this error message if the external hard drive is not properly detected.

  You can consult the section "Reconnect your drive" article and check:

  What happens if something is wrong in the history of the files?

  For more information, see the articles:

  Restore files or folders by using the history file

  Set up a drive to history file

  Protect the user with history of files files

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Computer comes back even when it has been turned off.

  When I switch off my pc and then when I opened my pc, my pc is on, what do I do when I turned off my pc it won't continue to flow... Thank you.

  Hello marky1234,

  This thread has been created in the forum of programs ; the Microsoft moderation team has moved this thread to the Performance Forum.

  Thank you

• Overnight battery discharged when the satellite has been turned off

  Hello

  This has happened again. My battery empties 25% from one day to the next and will be completely discharged in a week. The machine is not in hibernation, it is completely shut down. If I charge the battery and remove it from the machine it does not lose cool, which indicates a draining of the laptop. Any ideas?

  Hello

  Maybe this will help you a bit:

  I found this useful Toshiba paper on this topic:

  Battery drains 15-20% when it is turned off during the night
  http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  This can happen if the wake on the service LAN (WOL) by the built-in LAN module is turned on

  Please check!

  -----------------------
  By the way; the loss of 2 to 4% of the power of the battery during the night is a normal state.

  For details see this
  http://support.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• Unwanted search pane in Word (Windows7, Office 2007), keyboard and then acting weird, unpredictable, F1 key and then does not work. Office 2003 has been removed before installing Office 2007 and Word 2007 seemed ok before that.

  While typing in a Word Windows7 (new office 2007) doc I suddenly get the stream to the right of the screen, not asked for.  Go to the revision, Proofing tab shows the space search button highlighted (never selected by me);  my keyboard (Microsoft!) and then crashes and behaves strangely and I can't seem to do anything. I can't find a way to remove or to move from this unwanted intrusion with the exception of the stop and restart, but it happened again and again.  Got a 3000 Word report to write, going crazy now.  No joy with the help online - in fact the F1 button stops working during these "tricks".  Someone at - it similar problems, or ideas where to go from here?  The most appreciated

  We sat, November 29 09 17:23:58 GMT, Pix101 wrote:

  > While typing in a Word Windows7 (new office 2007) doc

  Please note that there is no such thing as a word "Windows 7".
  document ". You're talking about Word 2007 (part of Office 2007) and
  It has nothing to do with Windows 7. Yes, it runs under Windows 7,
  but it can also under other versions of Windows. Word is a
  art of the operating system.

  Ask a question about word in a Windows 7 forum. You are
  much more likely to get the help you're looking for, if you ask
  in a word (or newsgroup) forum since it is the place where the Word experts
  Hang.

  > I suddenly get the listed to the right of the search bar
  > screen, not asked for. Go to the Review tab, check
  > Search button highlighted box shows (never selected
  (> by me); my keyboard (Microsoft!) and then crashes and
  > is behaving oddly and I can't seem to do anything.
  > I can't find a way to remove or change this undesirable
  > intrusion except by closing but down and reboot
  > It happened again and again.

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• Windows does not recognize tv as audio device after it has been turned off and turned back on.

  I have my computer hooked up to a HD TV with the HDMI cable.  The sound also pretended on television.  The HDMI cable is connected to my Radeon HD 6950.  I use Realtek HD Audio Manager with the ATI HMDI default Audio device.  All records are up-to-date.

  When I put my TV off and leave the computer running, I go back and turn on the TV and the computer behaves as the TV is not plugged, but only for audio.  The video is still there.  In the audio playback window, I noticed that Windows would go to the optical audio device, even though there is nothing plugged into this Jack.  I disabled all other devices and left only the HDMI device, so it will not move on.  Now when I turn on the TV it is just like nothing is plugged in at all for the audio.
  Any help is greatly appreciated!

  Hello
   
  1. What is the brand and model of your computer?
   
  2. which edition of Windows are you running?
   
  Example: Windows 7 Professional 32 bit.
   
  It could also be a possibility that a manual entry is required from your TV to the HDMI connection, please check your Menu\setting where the HDMI and PC connection is checked once it is connected to options to switch the Audio and TV screens.
   
  Please follow the steps mentioned below to help solve the problem.
   
  To disable improvements audio speaker

   
  a. open sound by clicking on the Start button, then Control Panel. In the search box, type soundand then click on sound.
   
  b. on the playback tab, click speakers, and then click Properties.
   
  c. click the enhancements tab and then select the check box turn off all the improvements .
   
  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.
   
  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.
  
  Reference:- why don't I hear audio when I connect my computer to a HDTV?
   
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
   
  I hope this helps.

• My Security Center has been turned off and I can't turn it back on.

  two things that Spybot found

  WindowsSecurityCenterDisabled_disabled

  Win32FaudLoad.EDT

  Run the full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  And then run these tools:

  http://support.Microsoft.com/mats/windows_security_diagnostic/

  http://support.Microsoft.com/mats/Malware_Prevention/

• STOP: c000021a {fatal system error} The Windows Logon process system ended unexpectedly with the status of 0xc0000034 (0x00000000 0 x 0000000) the system has been turned off.

  Please provide me with a solution for the problem mentioned above. I tried Googling for the same thing, but there are not enough posts about it.

  Check and see if the default Microsoft GINA has been replaced, to edit the registry, you have to mount the boot disk not in another machine to Windows or use a disc like UBCD4Win PE.  See here for easy to follow instructions on how to modify remote installation no Startup registry: http://www.rwin.ch/xp-live/regedit.htm

  If GINA is ok, you can try to restore the computer to an earlier date, or you might have to do and an upgrade on the spot (relocation) of the operating system.

  See here for more information: http://support.microsoft.com/kb/156669

  John

• I had a breakdown and even if my host has been turned off, he showed only disconnected and HA na not kick in.

  The trouble is, my Dev Environment has worked well, showing does not and HA worked, then that my production did not.

  The cause of the blackout was a power failure that the power off switch.

  The production host is a 3850 M2 and development hosts are HS21 blades in a BladeChassis.

  What would cause the server show disconnected?

  Due to the floods here, I am unable to work and check power redundancy, or if the House of all the server went down or just simply switch.

  How storage is configured on the server that is located behind the failed switch.  It is also configured the switch failed (iscsi or nfs), or is it fiber attached?

  If its fiber attached and the other virtual machines were running, the other guests could not power on the virtual machine because files would still be locked.

  What is the configuration of your HA settings on the cluster?  Leave power on or power off the power?

  If they all leave it turned on, and then only a physical fall of the server or SAN connection would allow an HA event succeed (because file locks would be then released).  otherwise the VM running isolated, but no other host can power on the virtual machine.

  It is probably a good event to happen because it caused a power failure but not a serious enough to make your life hell, it should give you more reason to push redundant switches on the side of production to ensure that a single switch failure is not bring down the environment.

• Hello. I bought and downloaded photoshop elements 13 today. When I tried to put in place and asked for the serial number, that I gave and then between (correctly, I checked several times) has been seems invalid. What is the next step?

  Hi there, I have bought and downloaded Adobe photoshop conductive 13 today. When you try to set up, I was invited to the serial number which, after entering, was considered invalid. The serial number is good. What is the next step, how to contact Adobe store?

  Error "serial number is not valid for this product". Creative Suite

  If that does not help, contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• don't knoe if you can help for this, but I get the error message "active desktop Recovery", desktop has been turned off. I followed the troubleshooting tips and tried to restore. no luck. can you help me?

  Screen turned white. shortcuts work well.

  I think that this is not a Firefox issue. Please try this: right-click on the desktop, choose "Properties", click the "Desktop" tab and 'Customize Desktop' > 'Web '. Deselect or delete the web addresses in the middle area. And click on 'Ok '.

• I get an error message that says Microsoft has encountered an unexpected error and my Active Desktop has been turned off.

  When I click on the button to restore my active desktop is nothing happens.  I get this message & I need to know what my children are doing to make this happen. I do not see the image that I put my experience or my desktop icons

  It may be possible that you have had some malicious software downloaded on your machine.  You can back up all the data you need to keep; that is, photos, documents, music and restore the operating system to an ealier point in time (or the image of the plant).