Podcast OGG resume problems when the device has been turned off and on again

Similar Questions

• Airport Express do not work when the mac has been turned off

  I plugged our mac mini and the Airport express separately to the internet via a network hub. When I turn off the green light on the airport Mac Orange and blinks. The internet connection disappeared.

  Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

  Post a screenshot of the express installation of airport utility.

  I plugged our mac mini and the Airport express separately to the internet via a network hub.

  This seems odd... What is a network hub? They went to fashion 20 years ago. Do you mean a switch? Real model number please.

  What model is the express?

  Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

  Plug the Express directly on the main router... and implemented in Bridge mode and create a wireless network. That's the way it should be installed now... but this 'hub' could be a problem.

• Overnight battery discharged when the satellite has been turned off

  Hello

  This has happened again. My battery empties 25% from one day to the next and will be completely discharged in a week. The machine is not in hibernation, it is completely shut down. If I charge the battery and remove it from the machine it does not lose cool, which indicates a draining of the laptop. Any ideas?

  Hello

  Maybe this will help you a bit:

  I found this useful Toshiba paper on this topic:

  Battery drains 15-20% when it is turned off during the night
  http://support.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  This can happen if the wake on the service LAN (WOL) by the built-in LAN module is turned on

  Please check!

  -----------------------
  By the way; the loss of 2 to 4% of the power of the battery during the night is a normal state.

  For details see this
  http://support.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• Windows does not recognize tv as audio device after it has been turned off and turned back on.

  I have my computer hooked up to a HD TV with the HDMI cable.  The sound also pretended on television.  The HDMI cable is connected to my Radeon HD 6950.  I use Realtek HD Audio Manager with the ATI HMDI default Audio device.  All records are up-to-date.

  When I put my TV off and leave the computer running, I go back and turn on the TV and the computer behaves as the TV is not plugged, but only for audio.  The video is still there.  In the audio playback window, I noticed that Windows would go to the optical audio device, even though there is nothing plugged into this Jack.  I disabled all other devices and left only the HDMI device, so it will not move on.  Now when I turn on the TV it is just like nothing is plugged in at all for the audio.
  Any help is greatly appreciated!

  Hello
   
  1. What is the brand and model of your computer?
   
  2. which edition of Windows are you running?
   
  Example: Windows 7 Professional 32 bit.
   
  It could also be a possibility that a manual entry is required from your TV to the HDMI connection, please check your Menu\setting where the HDMI and PC connection is checked once it is connected to options to switch the Audio and TV screens.
   
  Please follow the steps mentioned below to help solve the problem.
   
  To disable improvements audio speaker

   
  a. open sound by clicking on the Start button, then Control Panel. In the search box, type soundand then click on sound.
   
  b. on the playback tab, click speakers, and then click Properties.
   
  c. click the enhancements tab and then select the check box turn off all the improvements .
   
  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.
   
  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.
  
  Reference:- why don't I hear audio when I connect my computer to a HDTV?
   
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
   
  I hope this helps.

• STOP: c000021a {fatal system error} The Windows Logon process system ended unexpectedly with the status of 0xc0000034 (0x00000000 0 x 0000000) the system has been turned off.

  Please provide me with a solution for the problem mentioned above. I tried Googling for the same thing, but there are not enough posts about it.

  Check and see if the default Microsoft GINA has been replaced, to edit the registry, you have to mount the boot disk not in another machine to Windows or use a disc like UBCD4Win PE.  See here for easy to follow instructions on how to modify remote installation no Startup registry: http://www.rwin.ch/xp-live/regedit.htm

  If GINA is ok, you can try to restore the computer to an earlier date, or you might have to do and an upgrade on the spot (relocation) of the operating system.

  See here for more information: http://support.microsoft.com/kb/156669

  John

• My Security Center has been turned off and I can't turn it back on.

  two things that Spybot found

  WindowsSecurityCenterDisabled_disabled

  Win32FaudLoad.EDT

  Run the full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  And then run these tools:

  http://support.Microsoft.com/mats/windows_security_diagnostic/

  http://support.Microsoft.com/mats/Malware_Prevention/

• When putting the computer to sleep and then attempt to wake the computer, it has been turned off.

  Original title: win 7, will not wake up from slumber died

  Just installed a new ssd and reloaded win 7 and all updates. When I put to sleep and try to wake the computer has been turned off. Although the keyboard lights, but I have to push the power button and the computer restarts and displays the screen of abnormal termination. Help

  This is what I found. Installation of Win 7 and the corrupted BIOS. Re-installed both and everything works well.

  Thank you

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• \Device\RaidPort0, restore the device, has been published. Event ID: 129 storahci

  Hello

  I have a DELL XPS 13 9343.
  I did a clean install of Windows 10 and downloaded the drivers from dell.com.
  I am also running Hyper-V.
  I'm repeated warnings in my saying system Envent Viewer:

  \Device\RaidPort0, restore the device, has been published.
  Source: storahci

  Just before I get these events my computer freeze for 10-20 seconds and I can´t anything.
  It's very annoying, and I hope there is a fix for this?
  Thanks in advance.

  I had exactly the same problem on a lot of my dell systems. Here is how I solved the problem:

  First we need to change ""AHCI Link Power Management " which is a setting hidden in power management." Open the registry editor and change the following settings.

  HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-A2A1-449c-9680-f91c70521c60

  Change 1 to 2 attributes

  HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4FBC-825e-521d069d2456

  And again change the attributes of 1 to 2.

  Now, go to the Control Panel-> system and security control-> Power Options , click on "Change Plan settings" and then click on "change power avancΘs."

  Now under "Hard disk", you should have AHCI Link Power Management - HIPM/DIPM and AHCI Link Power Management - Adaptive options.

  
  Change the 'AHCI Link power management' active, meaning that there is no AHCI power management and finally change adaptive to 0 milliseconds (well if you have enabled "active" this option has no effect).

  Finally under "PCI Express" change "Link State Power management" to OFF.

  I hope this will help you.

  Good luck!

• Hallo why? When I update ios. When the image has finished error itunes and usb

  Hallo why? When I update ios. When the image has finished error itunes and usb

  Connect the iPhone to the computer that you are synchronizing usually with

  and follow the prompts to iTunes on this computer. If you

  do not generally in sync with a computer, you should always use

  iTunes on a computer to complete the update.

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• in the blue screen it rights something that suddenly turns off and restarts again.

  in the blue screen that he rights something that suddenly turns off and restarts again.my at startup of windows and after it notifies wait me and it stays like that for a long time and restarts again. Help

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Edition of Lightroom Mobile Sync - 'Sync has been turned off. This seems to be a backup catalog... »

  Hi, I just tried to synchronize. I am logged on LR5.4 and on mobile. I ran the sync once, that seemed to work. The next time that I'm connected, I got a dialog box saying "Sync has been turned off. This seems to be a backup catalog that can be updated with Lightroom mobile. "To do this, your catalog sync go in Edition > Preferences > mobile Lightroom and click on the button Delete all data.

  It is not a backup catalog, is my main and one alone, but I deleted all the data anyway. No difference. When I start the synchronization immediately made up the dialog.

  Any ideas?

  See you soon,.

  Scott

  Scott, you mention in your post "the next time I logged in." do you have explicitly signed out of sync Lightroom Mobile on the desktop after you sync the first time?  Or you might need to reconnect on the launch.  If it's the latter, this should not occur and could be another indication that the catalog you have signed forward is not the same (that is a backup or a copy that is not state same you were when you last signed in).  This catalog is shared between both machines somehow?

  If you see this and you are certainly not in a backup catalog, you should be able to perform the following operations with Lightroom close.  This will work better if you did remove all the data, even if it is not mandatory.  If you do not, after relaunch of Lr, we will rebuild your sync status which can take some time depending on how much you have synced.  I wouldn't do this for any other situation.

  On OSX: In the Finder go /Users/Data / Sync.lrdata Library/Caches/Adobe/Lightroom/Sync and delete it.

  Windows: In explore go to C:\Users\\AppData\Local\Adobe\Lightroom\Caches\Sync.lrdata and delete it

• Received a message that my antivirus has been turned off. How do I turn it back on again?

  virus protection has been turned off

  How can I activate my virus protection back on that I just turned my computer on and got an alert saying my antivirus is disabled

  Hello SharynKosanke,

  This thread has been created in the Windows 7 installation, upgrade, and activate forum. the Microsoft moderation team has moved this thread in the forum Windows 7 security, privacy, and user accounts.