When removing malware, damaged or corrupt files?

Similar Questions

• Removal of damaged and unreadable files

  After recovering from a failure of the HD, restoration has added a few corrupted files. I can't remove them and have used all of the methods suggested, I could find (for example, chkdsk, disk cleaner, unlocker, safemode, Hiren BootCD)? Apparently the failed drive content/caused some files to become corrupt were then copied to the backup file and more later restored corrupted.

  I replaced the defective drive and then restored from a backup, Acronis. The Documents and Settings folder found \temp so I could copy the files needed for new Documents and Settings. Everything seemed to have worked fine until I tried to remove the Documents and Settings is no longer necessary to \temp. Now, I have a number of different files in \temp which cannot be deleted. Error when I try to remove one of the offending files is "cannot delete [filename]: the file or directory is corrupted and unreadable."

  Can someone suggest another method to clean up this mess short of reformatting the new drive and reinstall again? TIA.

  Hello

  ·         Do you have an error message when you run the disk check?

  I suggest to run the check disk in safe mode and check if it helps.

  WARNING: When Chkdsk detects problems with the file system and tries to repair the damage, data loss may occur. Microsoft does not recommend running Chkdsk with the /f command-line switch unless you have a full backup of your hard drive.

  Attempt to repair the damaged file, the folder or the index system using check diskfile. To do this, follow these steps:

  (a) click Startand then click run.

  (b) in the Open box, type chkdsk /f :, where is the letter of the drive on which the file is damaged, the folder or the file system index exists.

  (c) click Yes to schedule disk check when the computer is restarted.

  (d) restart the computer and let the disk check run and check.

  NOTE: If the hard disk is large, Chkdsk may take several minutes to several hours to complete.

  See also: http://technet.microsoft.com/en-us/library/bb457122.aspx

• I get an error, "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" when removing malware.

  Original title: RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd.
   
  I tried to deleted manually scamware/malware (your computer has been locked by the U.S. Department of Justice) from my computer. After reboot I get this RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" if I click ok or X it stays just black. Please help me if you can. in a lay mans language as much as you can.
  I'm not much more than a geek, but can still manage my own if you tell me exactly what to do. Please include the step by step instructions. Thank you

  Two things... one, take a look at this site for some information and instructions (where something is hanging out)
  http://www.selectrealsecurity.com/malware-removal-Guide/
  and to know exactly what is running at the start have a look at this tool.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Increase the RAM, less corrupt files?

  Hello

  
  

  In order to reduce the damaged or corrupt files, you recommend to increase the RAM to reduce these events? I m using a computer with Win10, Intel I5, 8 GB of RAM and use server space to store my files.

  
  

  Thank you
  

  You don't want to hear this, but the upgrade of Windows 7 is hardly a great way to go. I back up all data, perform a reset of the entire system and then reinstall your applications again.

  Start > Update & security > Recovery > reset this PC

• SFC/scannow found but could not fix some corrupted files, how can I remove them / find them?

  Separated from this thread.

  Rob,

  Sincerely appreciate the info/advice.  I ran sfc/scannow and cropped the results to include only the unable to complete sections.  OK portions have been eliminated for practical reasons.  PC is a Vista PC with SP2 and all updates.  The antivirus program is run several times a week and has identified no virus/spyware/malware.  No other real problems with PC.

  2015-03-19 17:07:14, CSI Info 0000014 c [SR] beginning verify and repair operation
  2015 03-19 17:07:16, CSI Info 0000014 d [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014e [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:19, CSI Info 0000014f [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000150 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000151 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:07:20, Info CSI 00000152 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:20, Info CSI 00000153 [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015 03-19 17:07:20, info CSI 00000154 [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000155 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:07:21, info CSI 00000156 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015 03-19 17:07:21, info CSI 00000157 [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015 03-19 17:07:21, info CSI 00000159 [SR] verification complete

  2015-03-19 17:08:47, transaction Info CSI 00000187 [SR] beginning verify and repair
  2015 03-19 17:08:49, info CSI 00000188 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015 03-19 17:08:55, info CSI 00000189 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:08:55, CSI Info 0000018 [SR] a the item is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  2015-03-19 17:10:25, CSI Info 000001 c 2 [SR] repair 3 components
  2015-03-19 17:10:25, CSI Info 000001 c 3 [SR] beginning operation check and repair
  2015-03-19 17:10:25, CSI Info 000001 c 4 [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 5 [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 6 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 7 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 8 [SR] cannot repair the military record [l:18 {9}] "Chess.dll" Microsoft-Windows-Shell-PremiumInboxGames-chess, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI Info 000001 c 9 [SR] this element is referenced by [l:160 {80}] "' Package_66_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 243_neutral_GDR" "
  2015-03-19 17:10:25, 000001 ca CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:84 {42}] '------? \C:\Program Files\Microsoft Games\Chess"\[l:18{9}]"Chess.dll; source file in the store is also corrupted
  2015-03-19 17:10:25, 000001cb CSI Info [SR] cannot repair the military record [l:32 {16}] "PurblePlace2.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, 000001cc CSI Info [SR] this element is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, CSI Info 000001 cd [SR] cannot repair the military record [l:30 {15}] "PurblePlace.dll" Microsoft-Windows-Shell-InboxGames-PurblePlace, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:25, CSI 000001ce [SR] Info this item is referenced by [l:160 {80}] "' Package_65_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 240_neutral_GDR" "
  2015-03-19 17:10:25, 000001cf CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:98 {49}] '------? "\C:\Program Files\Microsoft Games\Purble Place"------[l:30 {15}] "PurblePlace.dll"; source file in the store is also corrupted
  2015-03-19 17:10:26, CSI Info 000001 d 0 [SR] cannot repair the military record [l:36 {18}] "ShaderCache.ps_2_0" Microsoft-Windows-WindowsSystemAssessmentTool, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  2015-03-19 17:10:26, CSI Info 000001 d 1 [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "
  2015-03-19 17:10:26, CSI Info 000001 d 3 [SR] full repair
  2015-03-19 17:10:26, CSI Info 000001 d 4 [SR] validation of transaction
  2015-03-19 17:10:26, CSI Info 000001 d 8 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  A few notes:

  (1) we will NEVER buy another PC with a trace of all 'games' that is, waste of space and time and a value.  Looking at the impossible to correct entries, they seem to be exclusively associated with functions of game without value.

  (A) we need to participate in this farce of a game or can simply be ignored without affecting

  legitimate operation/functions of the PC?  When close or restart, we get the error message

  0 x 0000142 failed to initialize properly... Other PC functions seem to work well.

  (B) is there a way to clean up the waste of space games so that would solve the problem

  without affecting the performance of the PC? (When try to remove the game worthless hoax,)

  It will not remove them). I know that some of the files 'source' for waste games

  missing.  Since NONE of them will ever by used, is there a reason to worry?

  Thanks in advance for your help.

  Gene

  St Paul, MN

  Hello

  This note at the end:

  "2015-03-19 17:10:26, info CSI 000001 d 8 [SR] check and repair the Transaction."
  completed. All of the files and registry keys listed in the operation have been successfully
  "repaired"

  Run a Checkdisk just to be sure and rerun the SFC.

  Run checkdisk - schedule it to run at the next startup, then apply OK your way
  outside, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can ignore the problems of game but if there is ever, all you are concerned about
  then you can extract the files from the Vista DVD or even to make a upgrade in Place or repair
  Installation

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  --------------------------------------------------------------

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Player Windows Media won't play byte streams as files are damaged or corrupted

  which is a byte stream because my media player won't play it say files are damaged or corrupt

  Hi AntonyNorcup,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  (3) when exactly you get this error message?

  (4) what Version of Windows Media Player do you use?

  Method 1: Users have solved a similar problem by Windows Media Player library database,

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  Method 2:  You can also see the steps outlined in the article below

  Error message when you try to use Windows Media Player to stream audio or video from Windows Media Services: «the specified protocol is not supported»

  http://support.Microsoft.com/kb/940029/en-us

• How to remove all corrupted files and Roxio?

  New problem since the last automatic download of an update to my Windows Vista:

  On Windows Vista, whenever I start a program, I get the error message ' (programname) .exe - damaged file. " The file or the directory c:\program files\common Roxio shared is damaged and unreadable. Please run the chkdsk utility. »

  I have run checkdisk repeatedly, but always the same error message every time that any program starts.

  I tried to uninstall all the subprogrammes of Roxio in this folder, but the "uninstall" program would not do that.

  I also tried to reinstall Roxio of CD disc programs and Vista wouldn't let me do it anymore.

  My other programs all work perfectly, so I take it that it is not the executable file for these various programs that is corrupt, only the one Roxio.

  The MacAfee program tells me that I have no virus it can see.

  How can I remove this corrupt file/folder? Or at least stop getting this error message?

  Hi Perplexed Peter

   

  Analysis of disk verification appears all the mistakes and errors have been corrected with the repair option?

   

  You can refer to the link below and check if the information provided, help you remove Roxio program completely from the computer of the eth-

  http://forums.support.Roxio.com/topic/13773-software-uninstall/

   

  If the problem persists, I suggest you to contact Roxio support forum and see if they can help you uninstall and reinstall the program completely.
  http://forums.support.Roxio.com/?s=d6476caa358ae88f26e2d270d570cd59

   

  I hope this helps.

• When I try to create a restore point, I get this message: Systempropertiesprotection.exe - corrupted file.

  When I try to create a restoration point, a message is displayed on the lower right part of the screen and I get this message: Systempropertiesprotection.exe - corrupted file.
  In addition, it tells me to run Chkdsk. I am doing and not of results. If I search for the file, Systempropertiesprotection.exe happens in several different directories along with one. Record of MUI with the same name. The computer seems to work very well, but my suspicions are triggered. Any suggestions?

  Hi Popo75,

  Let us try the following steps to solve the problem.

  Step 1

  Sometimes the malware could have disabled the files. Try to run an online scan and see if it helps.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If this does not help, try the next step.

  Step 2

  Try to run the Design Checker (SFC.exe) system files and check if the problem persists.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Check the link for more information:

  http://support.Microsoft.com/kb/936212

  Step 3

  If the problem persists, create a new user account and check if you still have the problem:

  To create a new user profile:

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Check out the link for more information on creating a new account below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer or useful you help others find the answer more quickly.].

• When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

  When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

  Good luck to the project is corrupted.

  Be happy, you have an auto save, even if you've lost some work.

• Photoshop Cs5 does not download - file damaged or corrupted.

  So, I have an old laptop Windows I got a full version of Photoshop CS5 Extended installed on. I recently bought a new Mac laptop, and I want to move my software. However, when I tried to install CS5 from this page - Download Adobe Creative Suite 5 products - I received a message saying that the file is damaged or corrupted and I had eject the disk file. Please help me with this, I need my software to work as soon as possible. It's embarrassing and I'd appreciate any help.

  You do not put diesel in a petrol car, and you cannot install of Windows programs on a Mac... unless you want to install a "emulator" on your Mac to run Windows programs

  Even if you download a Mac version, your serial number for Windows will not work, and CS5 is too old for Adobe to do a platform Exchange

  You can buy CS6 and use your CS5 for upgrade pricing - link to buy the CS6 via phone http://www.adobe.com/products/cs6.html

  In ADDITION, to install the old software on a new Mac, you will need to read below

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Error message"the file is maybe damaged or corrupted 1610153464 / also cannot open projects in the background 26: 142

  Hi all

  I hope someone can help me.

  I use AE CC/Windows 7 on a Dell, 32 GB of RAM, 64-bit op system, processor: Intel (R) Xeon (R) CPU x 5670 @ 2.93 Ghz 2.93 Ghz (2 CPUs).

  So far I had worked on many projects with no problems and then a few weeks ago, project crashing non-stop. The problem has been resolved when I got rid of all the MP3s and diverted to RAM. Once again, it was a problem that I had not in the past and I don't remember changing anything whatsoever.

  Now, it seems that it is impossible for me to export/rendering a project in a Quick time or same AVI file. If its quick time, I get this message: unable to make failure of After Effects error one module output. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: cannot open projects in the background AE 26: 142)

  What is happening with the various projects.

  I have read the forums on hearing that the problem may be a Bug with quicktime and H.264? I never had a problem with it before, but even once when I try to export AVI I get this error message:

  Cannot open projects in the background AE

  I have a feeling that it is associated with quick time. I uninstalled and reinstalled QT, but still not the problem. It will open the old QT files without problem. I tried to download an update of the correction of a bug as a proposed post but I think I have the final reason why it did not work.

  This project has a couple of quick media files H.264. Do I need to convert? They are the cause of all this?

  I'm sorry, I really tried to seek answers in the forums before contacting you here, but I can't find a reason for all this mess, which again appeared a few weeks without any problems for months... If someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

  QuickTime H.264 is terrible. Do not use it.

  Use the AVI file, you have created in your Adobe Media Encoder and use the parameters of H.264 there.

• How to find corrupted files and remove them on mac i

  How to find corrupted files and remove them on i mac?  AM currently using OS x EL capitan 10.11.12 Mac said to run slowly and the recent upload did not work until the 3rd attempt.

  Thank you

  You do not have.

  You can run this program and post the results so that we can see what you have installed that could cause your problems.

  http://www.etresoft.com/etrecheck

• Windows Media PLayer 11, removes all libraries and playlists. Message about corrupted files.

  This happens about once a day when I stopped WMP, but this does not happen everytime I stop WMP.  WMP loses all elements of library and playlists.  I can add my music to the library, and WMP recognizes the music and my playlists.  But at some point, it will be lost again. I am using WIndows XP Pro SP3.  Any ideas how to solve this problem?

  Thank you!

  What is the exact text of the message about corrupted files?

  This is usually caused by a corrupt media library. To reset the library, follow the instructions for WMP 11 on XP at http://zachd.com/pss/pss.html#medialibrary. Note the reset of the library will make you lose all the counts to play and possibly ratings too.

• When running Disk Cleanup, it does not remove anything to "Compress Old Files'.

  When I run my disk cleanup, it does not remove anything to "Compress Old Files' during cleaning.» Why not? I also need more disk space to defragment and I deleted all the programs that I don't use, but is not yet give me enough disk space.

  Compress old files not removes all files, compress files that are rarely or seldom used.

  If you get the low disk space, less than 15-20% free space, then you need to collect as much space as possible. However, the amount you get will not be a solution, only a temporary fix - it that.

  To add or remove programs and Windows components in Control Panel, you can uninstall programs as your plue no use - if you have. Not to be far uninstalling programs, you do not recognize, many elements are required for other programs work properly.

  Uninstall or change a program
   http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also check to see how much space is reserved for the restoration of the system; by default, many GBs are usually reserved. Also disable hibernation as the file created can be 2-3 GB, sometimes even more.

  You must also consider moving your files and folders on a removable media, such as DVDs or an external hard drive. Still a great flash drive with 4 + GB of space can help, and their prices are reasonable these days.

  In addition to Disk Cleaner, you can consider running CCleaner. This is a free program that will remove the unnecessary and temporary files temporary Internet files of the most popular and many browsers other caches that can be cleaned safely.

  Since you are using Windows XP, there is a setting in CCleaner to remove the uninstallers of patches; These are the Windows Update files you've downloaded and installed over time and are there if you ever want to uninstall the update. But you can save these CD/DVD and then remove them safely from your system to recover the space. If you have ever removed one of these, you may be able to get beyond 1 GB of space.

  CCleaner
   http://www.Piriform.com/CCleaner

  If you decide to try it, by default, that almost everything in Windows Applications and is verified to be cleaned. You must first review the lists (they are compiled by what you have installed) and check/uncheck accordingly.

  Then click on analyze to see what will be removed (nothing is deleted when you click Analyze); When the scan is finished you can double-click on (or right click and select view detailed results) of the entries in the list to get more information.

  According to the detailed results, you can right click for options such as adding to the list of exclusions if you want the deleted item.

  Once that you are completely comfortable with your selections, you can click the run Cleaner button and then OK to put warn before vacuuming will run.

  CCleaner is also a registry cleaner that I don't recommend that you use - even if you have successfully run a registry cleaner in the past, it is quite possible that the next time will bring serious problems; they are not worth the risk...

  TechRepublic has just published this article about CCleaner:
  5 tips for using Ccleaner for degunk your system

  http://www.TechRepublic.com/blog/five-tips/five-tips-for-using-CCleaner-to-degunk-your-system/767?tag=nl.E101

  CNET editor's review:

  http://download.CNET.com/CCleaner/

  I know that this was not the miracle that you can have hoped, but personally recommended solution is a new, larger hard drive. In the case of desktop computers, an additional hard disk is useful for your personal files, especially for music, movies, photos and more.

  I hope this helps.

• system32\DRIVERS\pci.sys missing or corrupt file error but windows xp is already preloaded on computer when purchased

  missing or corrupt file error system32\DRIVERS\pci.sys keeps appearing. I had a problem with google chrome and then stop everything. This error appeared. It tells me to use the cr rom boot but xp was already loaded on the sony vaio that we bought a few years ago. I don't know what to do next because I don't want to lose the pictures and music, we have on the hard drive. Any help would be appreciated

  If your data is not backed up, then at some point that the data will be lost.

  Your Sony are delivered with a hidden restore partition or recovery disks, but I do not think that the Sony recovery allows to repair an installation of win, only pure install.

  You must remove the drive and it slave on another PC in order to retrieve the data, or take it to a decent repair shop for them to do it for you