When scrolling DataGrid line borders

Similar Questions

• need to turn off the speed slider/shadow that appears on the right side of the screen when scrolling through a document

  I'm operating Vista Ultimate with 64-bit system. This happens in all the applications I use.  I will allow me to scroll through 15 to 20 pages until I can stop and then need to find the orginial page, sure I was.  I don't know what o call it.  Tried to review several books in the borders and Barnes and noble but nothing helped.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  If you have a wheel mouse, Windows Vista default scroll 3 lines in a document, Web page, etc., at a time when you scroll the wheel upwards or downwards.

  Send instructions on changing the properties of the mouse. Under "Vertical scroll", choose whether or not to scroll a few lines at a time or a full page at a time. It is best to scroll one full page at a time, if you work with very large documents.

  If you scroll through a number of lines at a time, check the box under "The number following lines both" to change this behavior. 1 line is slow scrolling; 100 is the fastest.

  You must change the mouse settings by following the instructions below that will help you solve the problem.

  To change the mouse wheel works

  1. open the mouse by clicking the Start button, click on the Control Panel, clicking hardware, and then clicking on the mouse. 2. click the wheel tab and then do one of the following: To set the number of lines that the screen will scroll for each notch of mouse wheel movement, click on the next lines in both number and then enter the number of rows you want to display in the box. To scroll an entire screen of text for each click of the mouse wheel, click one screen at a time. If your mouse has a wheel that supports horizontal scrolling, in the tilt the wheel to scroll the number of characters in a time zone, enter the number of characters you want to scroll horizontally when you tilt it flying to the left or to the right.

  Click on the link below for more information on changing the settings of the mouse.

  http://windowshelp.Microsoft.com/Windows/en-us/help/efd700f8-bbc0-4F04-9f78-3bdb4bbf47011033.mspx#ESF

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Fuzzy letters on websites when scrolling in Firefox 19 (with either smooth scrolling active / disabled)

  Hello

  Recently, I updated to Firefox 19, and since I had some problems when scrolling on Web sites: some lines/letters fade.
  I did some research online and found a trick to disable smooth scrolling, so I only have restarted Firefox, but the issue is still not resolved.
  I have not had this problem until the recent upgrade.
  Is this a known issue? Is there a solution to this?
  If no, how are we going to go back to the previous version of Firefox, I can only find the download links to the latest version...

  Thank you
  Lars

  Hello Santuzzo, try turning off hardware acceleration and check again.

  Thank you

• Get horizontal wrinkles when scrolling down in the active window in firefox.

  Using the latest version of Firefox on a Dell XPS 630i, Win 7 Pro. Use of a HP w2338h monitor set in 1620 x 1050 at 60 Hz. Graphics card is NVIDIA GeForce GTS 240. Logitech Anywhere Mouse MX.

  When scrolling down I get lines on the screen when I type text. When I keep scrolling, it goes but lower reappears on the screen. It; s quick and barely noticeable, but just enough to be a pain.

  Any help would be appreciated.

  Thanks cor - el. That seems to have done the trick!

• How do you create a message rule in outlook express when the subject line contains symbols

  I get emails when the subject line contains square boxes.  I tried to create a message for when rule the subject contains these square boxes, but cannot do so.

  Any suggestions?

  Thank you.

  Then, it will not work. Unless the messages are always of the same address, or a domain, so the only option I see is of filter in your mail.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Control junk e-mail in Outlook Express:
  http://www.Microsoft.com/Windows/IE/community/columns/junkmail.mspx

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• Flex4 DataGrid - mouse outside the data keeps scrolling DataGrid grid

  Hello

  the DataGrid control has the following behavior: when you click on the DataGrid control and move the mouse upwards on top of it and hold the mouse on top of it, the guard UPWARDS scrolling DataGrid control. When you move the mouse under the bottom of the data grid, the DataGrid scroll guard DROP.

  I am optimize my app for touch devices, and when the user moves his finger on the DataGrid from the bottom to the top, I left the DataGrid scroll in the same direction, which is in DECLINE. If the user now moves his finger beyond the upper limit of the data grid, the DataGrid changes the direction of scrolling.

  How can I avoid scrolling the DataGrid when the mouse moves outside, or how change the direction of scrolling the DataGrid?

  Thanks in advance

  LLD

  You can have to subclass DataGrid and override the dragScroll method.

• Madness of scrolling DataGrid

  Hi all.
  
  I'm trying to get a container to scroll when a datagrid is scrolled.
  
  Y at - it an easy way to do it.
  
  I am aware of the v and h scrollposition properties, but the difference how the datagrid scroll causes the two sync scrolling elements.
  
  
  Any help is greatly appreciatted

  Hi, you can do this as a percentage. Here is an example (right click to view source):
  http://www.anaheimjobs.NET/samples/linkscroll/
  Hope you find it useful.

• Web page of Google News jumps when scrolling

  Google news Web page jumps when scrolling down.
  This is not the case when you use google chrome.

  Thanks for your help. It was this add-on that was the problem.
  Flash Video Downloader - Youtube Downloader 3.5.4
  Thanks again for your help
  Barry

• When scrolling I get this strange undulating thing that is hard to watch. It seems that the waves over a barbecue or heat waves rises above the pavement on a hot day. Someone out there has this problem?

  The 'heat wave' on the screen when scrolling. It's driving me crazy!

  Try turning off hardware acceleration.

  • Firefox > Preferences > advanced > General > Browsing: "use hardware acceleration when available.

• Firefox 5: distortion when scrolling on web pages. appearance Wavey

  There is distortion when scrolling on all webpages using Firefox 5. It doesn't matter how fast or slow scrolling, screen becomes wavey to stop scrolling. I uninstalled and reinstalled Firefox and did not help. This happens not using Safari or in documents or spreadsheets open outside of the Firefox browser.

  Its best to take a Screenshot of your toolbars before you run the following suggestion.

  Launch Firefox in Mode safe mode by holding the SHIFT key while starting Firefox-> window Mode safe if poster-> place checkmark on the 2nd option "Reset Toolbars and of orders"-> click "make changes and restart".

  Check and tell if its working.

• Qosmio X 770 - 11 c - how to disable on board the speakers when you use Line Out?

  Hello

  Is it possible to disable on board to intervene when the output line is used.

  Currently, if I plug in a cable to the socket of hadphone and choose alignment on the realtek Control Panel, sound is output line out as expected, but also through the internal speakers.

  Is it possible to stop this and don't have sound out through the output line?

  Thank you

  Graeme

  If you want to hear his helmet only you should choose option helmet.
  Disconnect the cable and reconnect it. When you see the small window on the screen where you can choose between the headphones and output line options choose headphones and you'll hear on external display only.

  In case you have disabled this pop-up dialog box you can activate it manually. Open the Realtek Manager connect the external device and when you see active point black on the right side make double click here and change the settings.

• How can I disable the mini-bar of scrolling that appears randomly when scrolling?

  ProBook 4310 s, Windows 7

  When scrolling, a small scrollbox appears randomly and that he's taking me away from the page I'm scrolling on.  This happens when I use the small plate square to scroll.  It's the only 'function' most irritating of any computer I have ever owned or used, and I wish I could turn it off.  How to do that please?

  Hi Taxlady:

  I found the solution myself.  You have to start HP Support Assistant and choose the resolution of problems (the second of the four options, my copy is in Swedish so it may not be called Problem Solving but something similar).  Then choose the devices, one on the middle of the bottom row and the following Configuration for mouse and .  Here, you will get a new window with a menu five point on the left.  These elements will be something like:

  Overview, scroll, Point, buttons and other things I don't even understand Swedish for!

  Choose scrolling, and down there, you have a finger to scroll.  Disable horizontal and vertical scrolling, and your problems are over.

• Media Player freezes then shuts down when scrolling through my music

  When scrolling through my music on the media player, about half way through, Media Player freezes all then stops.   I uninstalled and reinstalled several times without success

  You get an error message? If so, please post the full text.

  If WMP crashes, then please send the technical details of the accident here. Go to start - run, type eventvwr.msc, and then press Enter.

  In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.

• BrowserField2: a white space appears when scrolling

  There is a strange scrolling with height html problem in the browserFileld2.
  I asked the html content.  and after you download html when I view the HTML

  and scroll to the top and then Ahmed for the bottom and scroll back to the top.

  There is a strange white space that covers half the screen.

  Please see the attached attached off screen

  

  Look like browserField2 not 120 Hz content when scrolling. How to solve the problem? Help, please.

  BlackBerry OS: 5.0

  Problem has been resolved.

  Sorry the question was realted to zoom, zoom rather than scroll

  When the user presses DOUBLE_TAP or Double click to zoom in, zoom back the contents of the browser field and if the user is in middile of browserField rather than at the top. white space will automatically appear below the content.

  I solved the problem by substituting the screen method touchEvent (TouchEvent)

  and if the user is not on the top then by verticalScroll zero adjustment.

  If (te.getGesture () .getEvent () == TouchGesture.DOUBLE_TAP) {}

  If (_bf2.getManager ()! = null & _bf2.getManager () .getVerticalScroll () > 0)

  {
  _bf2.getManager () .setVerticalScroll (0);
  }

  }

• How do with java: bar navigation remains visible and pops up when scrolling to the bottom of the page

  Hello

  
  I want as my default-navigation bar to jump to the top of the page when scrolling down the site - it must remain visible as on this page: www.yourpagemaker.de

  It's a German Site.

  Can someone help me with this? Where do I have to insert Java Script and how can I give this command?

  Thank you

  ELISA.

  You must change your nav to have a. affix the class with JavaScript (not Java).

  Bootstrap model 3 - attach nav after the scrolling example code

  Nancy O.