When the phone's main display large monitor display area is reduced

Similar Questions

• BlackBerry Smartphones Priv autorotation setting returns to portrait when the phone is turned off

  I like to keep the orientation of the phone to turn but will not hold the adjustment.  I change the setting for automatic rotation whenever I turn on the camera, but once I got disabling the phone setting goes back to the Portrait.  I have other Android devices, and I have a Z10 and Q10 and never had to put auto-rotation once.  I've been foolling around during almost two weeks now with the support of BB and all I get is an evasive.  (They answer as I am stupid and do not know the difference between the two icons.)  I changed the quick setting of parameters and display, it always comes back to portrait when the phone is off.  Does anyone have ideas on this?

  Hmmm... Well, I don't remember what is happening for me with this exact same build. All I can do is recommend you try again with formal support... something is wrong if she does that.

  Or, if you don't want to talk to them, another thing, you could try the BBVE app, to see if he can identify any problems:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035973&language=English

  Otherwise, this has always been like that? If this isn't the case, then what has changed just before everything started? A new application? An update of a certain type? Something else? Think very carefully that the smallest thing could be causal.

  In addition, the only thing I can recommend is a reload of the OS, using what I call the "skeleton" procedure, in an attempt to circumscribe the precise causal element:

  1. Via the autoloader, load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  Good luck and let us know!

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• View missed calls when the phone is off?

  Hello

  My phone turned off (or without service) incoming calls do not show on my list of missed calls.

  There may be a voicemail when my phone is back, but no match no missed calls.

  Is there a setting that will show you missed calls when the phone is off?

  Debra

  iPhone 6 s

  Once you turn back on your iPhone, all calls that occurred while the iPhone was off should appear in the Missed Call list.

  If they do not:

  • If you are in your area served by your cellular operator, contact your operator.
  • If you are outside this area (roaming), you can not see the calls until the return.  You could ask your cellular operator on this subject.

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• No way to ignore the call when the phone is "locked."

  I noticed this AM when I call came because I have the ability to "slide to answer." I wanted to send the appeal

  for VM as I can when the phone is not locked.

  -Nancy

  You can do it.  Simply press the power button a times to cut the ring/vibrate and twice more to ignore the call.

• Moto G4 - push notifications to stop functioning when the phone is idle / inactive

  Hello!

  I have a very annoying problem with my G4 bike purchased in the UK.

  Problem:

  My push notification comes to app and gmail to stop working when the phone is idle / inactive.

  When I use any application or when I put just the phone side push notifications work fine. They appear on the lock screen and beep.

  After a few minutes of not using the phone, the message to stop the spread. The sender indicates that a tick and the Moto G4 does not show notifications of type push until the phone is activated and unlocked. It is very annoying, because I already missed several attempts to call. This problem occurs with the Wifi or data plan. It is not a What'sApp of settings as it works very well for a while.

  Text messages and phone calls work well, just a data plan seems to go off when idling and never come back until unlocked (even then it takes a while). WiFi seems somehow to maintain a connection.

  I tried:

  • change What settings the sApp
  • disconnection/connection gmail account
  • remove the operating system of the device cache
  • disable the whats of ap battery saving options and all services appear to be relevant
  • WiFi seems somehow to keep the phone, but only data stops immediately, sending fn when idle
  • Restart in safe mode-> the same problem with meeting places. WiFi seems to work, data plan do not when idling

  Is this a known issue? Everyone knows the problem? To me, it seems that the camera seems to move from the internet and do not reactivate until this that unlocked.

  Any suggestion would be appreciated,

  Thank you!

  It seems to work now after clicking: 'Reset the settings App' in the top menu right in "parameters - apps-> gear-> battery optimization"!

  I haven't seen this solution anywhere else. I did the reset done only because I tried to disable optimization for almost all applications gradually. Without success, I clicked on 'Reset the settings App' and suddenly push notification for all work! Yes!

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• Music on iOs 9.2 playback stops when the phone goes to sleep

  I get a lot of e-mail music files.  I used to be able to read the files, leave email and use other functions, and could still play music.  Now when I go out of the enamel, the music stops when I upgraded to 9.2

  So, I listen to music from an e-mail and hung up and when the phone "goes to sleep" music station.  It didn't happen before 9.2.

  Please fix this.

  I have the same problem. In my case, the music also stops when I get out of the e-mail application.

  Please, how to fix?

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Ignoring a call when the phone is in standby

  When the phone is in standby and locked (black screen) and a call comes, is it possible to send it directly to your voicemail? All I do is just wait until voicmail picks it up.

  Most of the calls come to me when the phone is locked and that the only choice I have is either to respond or simply wait until that voicemail picks up.

  Is there another way?

  Joe Parsons

  I just hit the power button two times and the call goes directly to the virtual machine.

• Is more vibrant when the phone is on silent

  Hello world. I have a Z3 running 5.1.1 Build: 23.4.A.0.546 and a Version of Firmware to talk Smardband: 6.0.0.135 App Version: 6.0.1.107

  Recently, my band vibrates is more when I get a notification when the phone is on silent. He always has me notified before the most recent update. That's how I've always used the Smartband. I don't like my phone to vibrate or make noise.

  When I pass the silent phone to vibrate or sound, notifications start to vibrate on the smartband again.

  Is there anyway to get it back as it was? If not, is that a simple was to revert to the older version of the app (that worked)?

  Any help would be greatly appreciated.

  Lucas

  The recent update has solved

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• Receive a notification when the phone is unlocked.

  Hello

  I have a request I want to start automatically when the phone started AND the user typed a valid PIN code. I tried to register my request as a SystemListener, but it seems a reminder after the phone has started, but before that the PIN code has been entered.

  Is in any way an application can get some sort of notification when the user has typed a valid PIN code?

  I use the API 5.0.0.

  Thank you!

  Welcome to the forum.

  I recommend the search engine, you will often find that other people have asked the same question as you:

  http://supportforums.BlackBerry.com/T5/Java-development/keyboard-unlock-notification/m-p/38671

  http://supportforums.BlackBerry.com/T5/Java-development/unlock-device-listener/m-p/351096

• BlackBerry smartphones, you can do the texts to vibrate when the phone is off?

  Hi all

  Is there a way to have texts that a single person come through when my phone is off?  I know I have a few exceptions already who can call me when the phone is switched off, but can you do this with text too?

  Thank you

  Arlene

  Update... I thought about it!  Somehow all my profiles and exceptions have been erased when I installed a new application.