When try to config a home network, one of my shows unidentified network system

Similar Questions

• HP Photosmart 7260 - I get "network busy" message when you try to print from home network

  I've included just a mac pro with Snow Leopard OS on my home network. I tried to add the shared printer, but even with the IP address, I can't print. Work of all my other pc. The host computer uses Windows XP, DELL router with firmware update, the printer is connected through a router. I already downloaded the latest drivers from the Apple site. Without success.

  OKAY, OKAY.  Honestly, I'm not very good with printer sharing, especially across operating systems, but I'll give it a shot.

  First of all, just to be clear, the printer is connected to a XP machine via USB and you're trying to print via a router, right?

  Let's try the simple approach:

  1. enable the account on the XP machine.

  2. on the Mac, go to System Prefs > Print & Fax, click the plus sign "+" to add a printer, and then click the Windows icon at the top.

  3. go to the XP machine, you may have to connect to it.

  4. choose the appropriate driver in the menu dropdown.  If it does not exist, choose a Gutenprint driver.

  Yet once again, I'm not very experienced with that - let me know how it goes.

• MacBook Pro crashes when connecting to WiFi at home

  Hi all

  Short:

  When I connect to some of my macbook pro WiFi networks freezes.  By freezing I mean all input devices stop working: no touchpad, no keyboard, no external mouse, no keyboard.  My laptop stops 30 seconds after the Frost is out of the reboot.  The problem is worse at home.  He will die almost instantly if I try to use my home network.  On the road, it can take an hour or two, then freeze!  At work, life seems almost endless, but it froze.  More details to follow.

  The Machine:

  Hardware information: ⓘ

  MacBook Pro (retina, 15 inches, mi 2014)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro11, 3

  1 2.5 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 194

  Video information: ⓘ

  Iris Pro Intel

  Color LCD 2880 x 1800

  NVIDIA GeForce GT 750M - VRAM: 2048 MB

  System software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disk information: ⓘ

  APPLE SSD SM0512F Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 499,06 (Go 92.99 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Symptoms:

  • When I connect everything first a loading bar is shown, sometimes it will freeze it and start/stop.
  • Shortly after I log in, before you do anything, but moving the mouse, it will freeze.
  • Sometimes I can not connect and it will work fine for a few minutes, until I use all that internet: firefox, safari, mail, any software that checks the license through the internet, then it freezes.
  • Other times, I can work on the internet without pain for hours.
  • Sometimes it will work very well, I will walk away and the machine goes to sleep.  When I wake up, it will freeze.  With and without the WiFi on.
  • Sometimes it will work very well, I'll close the lid for a certain period of time for 1 minute to 24 hours and sometimes when I open it it will freeze.
  • It crashed when booting in verbose mode.  Died when something with bluetooth.  I tried only once.
  • When in recovery mode (CMD + R), I can run the utility disc fine, but if I want to reinstall OS X, the minute, trying to download (after signing with my Apple ID) it will freeze.  It's the only way I've been able to reliable and predictable way to reproduce this problem, however, as on my home network.
  • There is never crash logs in the console.  I have never one "your machine should be stopped."  The only way that I know that there was a problem is that I will ask you to log in and when I do, none of my programs are still open.

  Where this happens:

  • On my work WiFi network, it's hardly a question.  Happened at least 5 times in the last year.
  • During a journey (so any number of networks and equipment) will occur once an hour.
  • At home, he can go months without a pass and then, as yesterday (24/04/16), occur continuously for hours on end.  (I have just let my laptop open and hear the chime start about once a minute).

  What I tried:

  • Reinstalled OS X.
  • Run diagnostics (CMD + D)
  • Reset the PRAM and SMC
  • Run recovery stuff (CMD + R)
  • Safe mode has the same problems; When internet is used, it freezes.
  • That thing where you delete all of your connections wifi, both in the Terminal and in the GUI.
  • Disable IPV6 on my Macbook Pro
  • The laptop is not hot.  Power supply or the battery power does not make a difference.

  Other stuff:

  • I have an old Macbook Pro (running Yosemite) who doesn't have these problems.  There is another Windows Mobile and apple and windows Phone which does not have these problems.
  • Using WiFi at home and Arris TG1682G me provided by Comcast/Xfinity.
  • My laptop froze all the time and then I went to another network (neighbor thank you!) and everything seems fine.

  As my computer can still freeze on other networks I'll post this now and change it.  I don't want to lose that.

  I can't find a button change.  Shortly after I posted this my macbook pro has frozen and restarted.  I was not on my wifi at home.

• home network to my windows Vista to my windows XP outboard HARD drive error (office of \\Tabletop\bu (k))

  Help me with the following, please - * address email is removed from the privacy *.

  This is the error I get when you go on my home network to my windows Vista to my windows XP with Service Pack 3 XP machine to look into his drive HARD outside (office of \\Tabletop\bu (k)). It was shared to the network as the other readers? KB/922120 has been installed and restarted XP.

  Office \\Tabletop\bu (k) is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions.

  Not enough server storage is available to process this command.

  Hello, JWpaynej,

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  http://support.Microsoft.com/kb/913628

  Another problem resolution

  http://forums.techguy.org/networking/289768-solved-you-might-not-have.html

  Error message: "insufficient server memory is available to process this command."

  http://support.Microsoft.com/kb/106167

  http://support.Microsoft.com/kb/225782

• 0x0000052e error code when you try to connect to a network printer

  Original title:

  I'm trying to set up a HP Photosmart all-in-one on a home network where this is a Vista machine and host machine is a Sony Vaio with Windows 7.  Windows 7 is the new part.  I had a network implemented with the available printers and used with the host computer running XP Pro.  I get error # 0x0000052e and tells me that the printer is not found.  Online, I noticed a number of people with similar problems.  Is there an easy work around.

  Second question: I am trying to connect a HP Laserjet 5000 (2001 vintage - parallel) to the USB port of the Windows 7 machine.  Windows cannot find the printer.  It takes more than a cable of adoptive parent to have the printer detected by Windows 7?
  M.
  Hello
  1. What is the exact error message?
  2. are you aware of any changes made to the computer, before the show?
  Solution A:
  For the problem with the printer network HP Photosmart all-in-one, follow the steps in the following link.
  "0x0000052e" error when you try to install a network printer in Windows 7
  http://blogs.technet.com/b/Win7/archive/2011/03/07/error-quot-0x0000052e-quot-appears-when-you-try-to-install-a-network-printer-in-Windows-7.aspx
  Solution B:
  For the problem with HP Laserjet 5000, follow these methods.
  Method 1:
  Run the printer Troubleshooter and check for the issue.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2:
  Download and install the latest drivers available for Windows 7 from the following link.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&TaskID=135&prodSeriesId=25473&prodTypeId=18972&pnameOID=14949
  I hope this helps.

• I use a HP computer, when I try to load Mozilla home page says I use an iOS and does not load

  When I try to open the home page of Mozilla it says it can not open with an iOS and my computer does not meet the requirements. I use a HP computer. He used to pen without problem until I upgraded to version 33. I had to use my IE browser in order to send it to you. In my browser IE Mozilla home page opens correctly.

  PROBLEM SOLVED

  OK James, I was able to understand the problem. I use Avast Anti-virus program. It offers a feature called "Home Network Security" when I updated to the latest version, I thought I'd give this feature a try. I went and disabled this feature, and was able to get the Mozilla Web site to load properly. What I don't understand is why he just did with Mozilla's Web site and only if you are using Firefox. It didn't do it using IE or Maxthon browsers.

  anyway thanks a lot for the answer to my problem and try to solve it. When you said "it could be due to a proxy or even external software that changes the browser identifies itself asonline. It made me remember the change that I did with the Avast anti-virus program.

• Re: Error Message When you try to print to a network printer

  I just bought the new laptop, and when I try to print to a network printer (one that I always printed at front), I get a message: "The Active Directory Domain Services is currently unavailable" - I can't add a network printer at all! Help!

  Is there a setting I need to change to be able to add network printers?

  I think you should contact your local administrator and let him install this network printer. He knows how to install the correct driver and how to find the location of the printer.

• Satellite L505-144 freezes when I try to connect to wireless network

  Hello
  I have problem with my laptop Satellite L505-144
  the problem is when I try to connect to wireless network, the laptop freezes and do not work until I restart it I try to install the new Toshiba Recovery Win 7 64 bit, but no interest
  what I need to do to fix :(

  Can you please use more than one sentence to the description of the problem?

  When this happen exactly on what stage?
  Your WLAN is visible for your laptop?

  How do you use the WLAN?

  Give us more information.

• Moved from home office computer. Try to connect to the home network. Working Group changed now it won't let me connect you to Windows. It is the search for field. What can I do now?

  My TI guy told me to do the following...

  go to my computer, and then click Properties. Then go in the name of the computer from a network to a working group. I entered the name of my working group. Then it tells me to restart so I did.

  Now when I try to get into windows that connect, when I enter the username and password he tells me to check and make sure that they are correct and check the field. It does give me an option to choose a domain.

  It's husband's computer and I need to run quickly. Any help would be appreciated.

  Note please. I am a novice user and that you will need as more detailed instructions you can give.

  Thank you

  Aimee Bushmaker

  Green Bay, WI

  BTW - Windows XP Professional is installed on the PC.

  Not good.

  When you remove a computer from a domain, and put in a workgroup, you must ensure that you have a local user account with administrative privileges created on the machine before removing the domain.  Maybe the built-in Administrator account will work, but in most domain environments, the default password [White] is replaced by a different password.  Microsoft has an article that deals with this:

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  Your technician COMPUTER should have known this would be a problem.  If you are a novice user and you can not access the built-in Administrator account, then your best bet to get must return to the domain and have your guys IT re - join to the domain.  Make sure you have a local user with administrative privileges created before withdrawing again to the field.

  Note that you normally will not have to remove a computer from a domain to make it work in a home-networking environment (working group).  You should be able to connect using the credentials cached [field] and your home network must always be visible to you.

  HTH,
  JW

• When you try to run Linksys Wireless Network Monitor error: cannot load ProcNICs.dll, Can t Load Res_dll

  Original title;

  Linksys wmp54g & windows vista

  When you try to run Linksys Wireless Network Monitor I get the following errors:

  Cannot load ProcNICs.dll

  Failed to load Res_dll

  Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.

  Any suggestions?

  Thank you.

  Hello

  I suggest you contact Linksys for assistance:

  http://home.Cisco.com/en-us/home

  Linksys Support link:

  http://homesupport.Cisco.com/en-us/support

  I hope that helps!

  If you need help on Windows, please keep us informed.

  We are here to help.

• Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

  I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

  two computers connected to a network via a router adsl modem to connect to Internet.

  I put the two WORKING groups on the basis of the same name.

  checked XP network places haven't seen vista pc, I had even impossible windows firewall.

  in Vista PC I put the

  ---> private network location

  ---> all in sharing and discovery are enabled

  I had the two PC but still do not see each other.

  So, what should I do?

  Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

  Thank you.

  Kind regards

  Michelle

  Hello

  Maybe this can help.
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot one

  Re just one example. Your list will focus on how your system is configured.

  ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP 8660 hard crash when you try to set up the network

  So, the strangest thing happened to my all-in-One printer, apparently without me even not touching.

  We have changed our ISP and had to spend our routers/wireless modems in our apartment. It is - of course - our printer drop the connection to the network - no surprise.

  So the big weird thing is, when I now try to establish a connection to our new network, our hardcrashes printer and needs a reboot (ie. on / turn off the) to the same function again.

  When it crashes I get a brief error message VERY (less than one second - white letters on a BSOD background), after which all the LED lights on the printer starts flashing and the screen tells me that the printer must be powered on/off voltage.

  The code (I tried to catch in the less-than-per-second duration is shown) is: B8409490

  When the printer is connected by wire (LAN), everything works like a charm. Using the copy function works fine as well. But since a cable solution is exactly what we were looking for, any input as to what the problem could be is greatly appreciated!

  PS:

  I tried to reset the settings and the use of the factory through the hidden «menu factory» reset Problem persists.

  Hi Diojr,

  Thanks for your reply and information!

  I'm sorry to see that you receive the error message when you try to connect to your network. I see the wired connection works fine. I noticed that you have already tried a factory reset and the same problem persists.

  If you haven't already done so, I suggest updating the firmware, and then try to reconnect to your network (wireless).

  Please let me know how it works for you!

  Click this link for downloading the Firmware update, select first your operating system and then download:

  Officejet Pro 8600 Firmware update

  Good luck

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• Try to set up a home network on XP but the router has no USB to connect to.

  I went to set up a home network and immediately floored that the network set up wizard asks me a USB port in my router and my router does not have one.
  Can someone help me with this you problem?
  I also have a PC, main one running W7 so how possibly configure it as well please?

  Hi DerekJudd,

  1. What is the exact error message you are getting?

  You can view the following items and see if it helps.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/813936

  You can also read the following article and see if it helps:

  How to set up a small network with Windows XP Home Edition (PART 1)

  Hope this information is useful.