When you perform a command to unzip my hard disk, the command is blocked.

Similar Questions

• Microsoft Office regularly crashes when you perform a save as on a network location mapped

  Microsoft Office regularly crashes when you perform a save as to any place of the network off the internal hard drives on my laptop. The version is 14.0.6112.5000 (64-bit).

  The question seems to relate to a problem with the Windows Explorer, I find that if I first open the folder by browing through Windows Explorer crash is much less likely to occur. It is not always, but usually after the 4th or 5th attempt I can save the document. Once I made the first save as a new document, I didn't backup after problems.

  This happens only with the Office suite of products - I have no similar problems with third-party programs.

  What is happening is the Save dialog box under opens, but when I try to navigate through the program crashes. I can usually (but not 100% of the time) scroll to reach readers intgernal, but almost always crashes when you try to reach the network mapped drives unless I have already sailed on these places by car outside the word.

  It is a relatively new problem. I did a clean install of Windows 7 (x 64) on my laptop in November 2011, everything was fine until April. My thought is that a .dll file is corrupt, or there could be a problem of accidentally unplugging a smartphone or Tablet without ejecting it first.

  Suggestions are greatly appreciated, I really don't want to go through the hassle to do a clean install and then restore all my programs again.

  Thank you!

  Julie

  I think that the first thing would be to try a repair.
  Start > Control Panel > programs and features > click on your Office installation > click Change > repair

  I hope this helps.

• I have error vowsem216dll come often when you turn it on and when you perform updates

  I have error vowsem216dll come often when starting up and when you perform updates today has 32/ntdll.dll error. How do I sort them?

  Many had / have Windows 98 so far.  He may not be able to access most of the internet, but it works.

  You upgrade the computer to another operating system platform?

  Windows XP is more supported by Microsoft but as long you are able to locate the drivers/software to operate, do. Windows 8 is developing so I wouldn't waste my money on Windows 7 right now.

  Restart the computer and the logo of the manufacturer, start typing F8

  Select Mode safe mode with networking

  Download the following tool and run a full system scan to exclude the malware.  If your system is infected your anti-virus software will have been compromised.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You receive messages such as:

  Rundll32 - this program has performed an illegal operation and will be shut down.

  RUNDLL caused a General Protection Fault in module MMSYSTEM. DLL to 000's: 00000032

  Search for a file located in c: \ windows------vowsem 216.le dll

  After that the file is associated (application/program)

  The only reference I can find about vowsem216dll is on yahoo or pharmaceutical products of brand vowsem responses

  http://UK.answers.Yahoo.com/question/index?QID=20081001095149AAvpVDo

  Start > type MSCONFIG

  Search for list of vowsem and uncheck the box

  Click on apply, Ok

  Restart the computer

  Check do not show me this again in the Configuration window.  It will show at startup, and except if you check the box to not show it will nag.

  Click Start > run

  Type System.ini

  Click OK

  Search for mmsystem

  If this line does not exist, add it.  Save and close the System.ini

  Restart the computer

• When you perform a reset wilI it allow you to do another set of recovery disc

  When you perform a reset to factory setting on windows 8. It will allow you to make another set of recovery disc?

  Hello

  It depends on how do the reset

  (a) using a new set of HP or the recovery partition (no game has been created): Yes

  (b) using a set that was created from your machine before: No.

  Kind regards.

• Error message having to do with VSS/open files when you perform backups remotely

  When you back up by using services of Mozy for the last 2 weeks that some files could not be backed up.    Mozy did a few checks and they said it had to do with some files remain open.  They said it had to do with the Vss/open files, is there anyone out there who might be able to help?

  Hello
  • What version of Windows XP you are using?
  • What is you receive the exact error message?
  You can view these methods:
  Method 1:
  I suggest you try Windows back up and check.
  Here is the link:
  http://support.Microsoft.com/kb/308422
  http://support.Microsoft.com/kb/320820
   
  Method 2:
  You can also see the question in the boot.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package when you perform an installation of 2013 Pro Evolution Soccer

  This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package when you perform an installation of 2013 Pro Evolution Soccer

  Hello

  Are you using an installation disc or try to install from a download online?
  Visit the game manufacturer if your computer meets the minimum requirements to install the game. You can also contact for a solution to the question you posted.
  https://www.Konami-pes2013.com/en/

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• What are the risks by removing the previous Windows installations when you perform disk cleanup?

  What are the risks by removing the previous Windows installations when you perform disk cleanup? Will be some things about windows 7 stop working or be affected?

  The Windows.old folder is your ticket to uninstall Windows 7 and roll back to Vista.

  If you are happy with the results of leveling, can access all your data files, all that you have transferred to the E-mail, the .old folder can be deleted.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• "Windows needs your permission to continue" - where is the setting to remove this message when you perform tasks?

  "Windows needs your permission to continue" - where is the setting to remove this message when you perform tasks? Thx a lot...

  Windows needs your permission to continue, where is the setting to remove this message when you perform tasks? Thx a lot...

  Windows needs your permission to continue, where is the setting to remove this message when you perform tasks? Thx a lot...

  You probably means User Account Control. Here's how to disable: http://www.howtogeek.com/howto/windows-vista/disable-user-account-control-uac-the-easy-way-on-windows-vista/

• When you perform an adjustment in RAW, when I brush to select the area I want to solve, she brushes only above certain areas look blurred/pixely mask

  When you perform an adjustment in RAW, when I brush to select the area I want to solve, she brushes only above certain areas look blurred/pixely mask

  Have you checked auto mask?

• How to hide text when you perform a mouseover?

  I'm quite new to Captivate, and I'm hoping to hide a text box when you perform a mouseover. The idea is that the text fades mousing over a certain amount, but I need the text background to disappear to function effectively.

  I guess I need to use a tip Action and understand the Action fairly easily, but only part can not see to understand what needs to be part of the FI. Any help will be appreciated.

  Thank you

  I don't like break it will... but it was not a perfect world for thousands of years now.  And it is not improving.

  Captivate is an obvious LACK when it comes to mouseover events to trigger interactivity.  There is a new widget to HTML5 which will soon release that addresses this issue, but you will have to wait for her.  And as it's ONLY for HTML5, you can't use it with output SWF.

  If you use SWF, there is a handler for Infosemantics widget that allows you to trigger actions mouseover and mouseout/mouseouthandler().

  Topic of Infosemantics Event Handler Widget | Infosemantics Pty Ltd

  Free trial versions of the widget are available here if you want to test:

  Free trial versions of Adobe Captivate Widgets | Infosemantics Pty Ltd

• IPL fail... no trace to reposition to when you perform the direct load task.

  Trying to do an initial load, I get this error whenever I go out a table with data in it:

  Treatment FOO table. BAR

  2013-11-21 23:22:15 WARNING EXTRACT OGG-01194 task LOADREPL added: there is no trace of reposition to when you perform the direct load task.

  Context of the source:

  SourceModule: [er.idlx]

  SourceID: [/ scratch.local/mmar/view_storage/mmar_14516066/oggcore/OpenSys/src/app/er/idlx.c]

  SourceFunction: [IDLX_complete_tcp_msg]

  SourceLine: [383]

  ERROR OGG - 01203 EXTRACT abending

  ERROR OGG-01668 PROCESS ABENDING.

  The strange thing is, I can use the same extract initLoad and loadRepl replicat... except using a different source schema.table and schema.table of the target, and it will work!

  User El error.  I increased the storage space available for the target schema that wasn't and the problem disappeared.

• When you perform an upgrade download, download ask me to close elementsAutoAnalyzer, I can not find

  When you perform an upgrade download, the Download Manager will ask to close elementsautoanalyzer.  I do not have or can not find this application.  Please notify

  Programs interfere with the Installation of fence
  ----------------------------------------------

  Task Manager - PC: (CTRL-ALT-DEL) http://support.microsoft.com/kb/323527

  Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.