When you start the pc the screen is black

Similar Questions

• I get an error when you start the process of windows 7 installation on ubuntu 9.04

  I'm on ubuntu 9.04 and I do not so I wanted to install windows 7 on it, but after clicking on install on Windows 7, the installation of a temporary file stops after 10 seconds with an error message:
  "Windows is unable to find a place to store temporary installation files. To install windows ensure that a partition on your startup disk has at least 685 MB of free space.   Error code 0 x 80070490

  Please help me and am using ubuntu 9.04

  You will need to repartition your hard disk, so that Windows does not recognize the file system that Ubuntu Linux uses by default (which is ext3). You can do within Ubuntu Linux using several different tools, or if you are more interested in the use of Ubuntu Linux you can repartition the disk in the installation of Windows.

  PLEASE NOTE: The following allows you to delete all the data contained on your hard drive. I can't be held responsible for any data loss that may be incurred. Please make sure that you back up your data before you run the following commands. Use at your own risk.

  Repartition the drive by using the Windows installation:

  1. Insert the Windows 7 installation in your DVD Player DVD.
  2. restart your computer and boot from the DVD drive when asked ("press any key to boot from the CD or DVD... »)
  3 Windows Setup will load, give him a few moments.
  4. When you see the installation screen of Windows 7 with "Windows Installer", press SHIFT + F10.
  5. in the command prompt window that appears, type diskpart and press ENTER.
  6. at the diskpart prompt, type select disk 0and press ENTER.
  7. at the diskpart prompt, type cleanand then press ENTER.
  8. the DiskPart utility removes all partitions on the hard drive as well as the master boot record (MBR).
  9. at the diskpart prompt, type exit and press ENTER.
  10. in the command prompt window, type exit.
  11. click on install Windows and follow the on-screen instructions.

  Kristan M. Kenney ("Nighthawk64"). My Blog: http://blog.kristankenney.com

• How to make a virtual computer to connect to a CD player with an ISO mounted when you start the virtual machine?

  I am the creation of virtual machines using PowerCLI 5.5 on vSphere 5.0; and while the virtual machine is turned off, I am able to mount an ISO on a CD player and change the boot order to boot from the CD-ROM (for another post).  I have the flag startConnected set to true, but am not having much luck getting the virtual machine to connect to the CDDrive

  $cdObj = $Vm | New-CDDrive - IsoPath $isoPathName - StartConnected: $true

  If ($cdObj - no $null)
  {
  #Power off VM if it is on
  $VmState = $Vm.PowerState
  
  If ($VmState - eq "Receptor")
  {
  $Vm | Stop-Vm-confirm: $false - ea 0
  }

  $BootHardDiskName = 'disk 1 '.
  $VmView = get - VM $VmName - Server $serverObj.Name | Get-View
  $HardDiskDeviceKey = ($VmView.Config.Hardware.Device |) Where-Object {$_.} DeviceInfo.Label - eq $BootHardDiskName}). Key

  $BootableHardDisk = new-Object - TypeName VMware.Vim.VirtualMachineBootOptionsBootableDiskDevice - property @{'DeviceKey' = $HardDiskDeviceKey}
  $BootableCDRom = new-Object-Type VMware.Vim.VirtualMachineBootOptionsBootableCdromDevice
  
  #Set for CDRom boot order
  $BootIso = new-Object VMware.Vim .VirtualMachineConfigSpec - property @ {}
  "BootOptions' = New-Object VMware.Vim.VirtualMachineBootOptions - property @ {}
  BootOrder = $BootableCDRom
  }
  }
  
  #Set VM from the start settings at the start of the first CD and forces the display to update (sometimes delayed)
  $VmView.ReconfigVM_Task ($BootIso) | out-null
  $VmView.UpdateViewData ("Config.BootOptions.BootOrder")
  
  #Power on VM
  $Vm | Start-VM-confirm: $false - ea - global 0EV: vmOpsError | out-null

  When I start the VM, it does start the ISO.

  If I go to vCenter, the CD is pointing to the ISO file, but the 'Connected' to change settings option is not checked;  I can restart the VM of vCenter and then the VM restarts the ISO, but not in the script.

  I even put code to add a lead time of 5 to 10 seconds; I restart the virtual machine twice in the script and I can't CD to connect to start the virtual computer.

  Appreciate any suggestions.

  Maureen

  Have you tried to do a

  Game-CDDrive - CD $cdObj - connected - confirm: $false

  immediately after the start-VM?

• When you start the computer, the error: "year error occurred in the program during the initialization of the error Code 0 x 80070002.

  Buy HP Pavilion with Windows 7 64 bit.  Migrate some applications and files of old laptop computer with Vista 32-bit.  Most applications migrated work but when I start the new computer, still get this error message: "year error occurred in the program during the initialization of the error Code 0 x 80070002. Once I close the error message box, applications seem to work.  What is a real problem or just a nuisance, I can't ignore?

  original title: Error Code 0 x 80070002

  Hello

  I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode, and then perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to put the computer to a normal startup.

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• When I start my Equium P200D screen remains black

  Hello

  I have a portable Satellite P200D-139 (WinVista). I left on during a few hours after work a day to to this subject when I came back the screen was black, but there is no way get back on. I have turned it off manually (I know we're not really supposed to do, but I had no choice) and tried to turn it back on to the it, but there is nothing happening.

  I can hear it start about 2-5 seconds, then it's as if he won. I can still hear a slight noise hum (fan), but it is not from, and the screen remains black. Nothing lights up.
  I tried to cool, I tried to remove the battery, nothing works.
  I tried using F8 to repair, but is not answer either.
  I don't want to reformat it completely right now that I have docs and photos which I did not have time to put on the disk.

  Anyone would be able to help me with this? That's my working tool, so I'm kinda stuck with this problem.
  A big thank you to all those who can help.

  Kind regards
  Stéphane

  Hi Stephanew,
  as I recall it has an ati graphics card...

  but try this to get your machine to work:

  -pull out the hard drive to protect your data (Let's hope that there is no damage yet...)
  -take out the battery and try to start only with the power adapter > shoukld you see the toshiba on-screen logo > failure other components can be 'guilty '...

  -attach an external monitor to your computer and check if there is a visible image > no image at all?
  -check the memory, for this purpose, remove the memory and test if the satellite "buddies" > heard some of this? Yes?

  iasume the grafics card disappeared... see your certified partner...
  Let us know if this helped you.

• I get a screen when you start the computer.

  Hello

  How are you?

  Recently, my system hung up and had to do a force restart. I get a screen when starting my computer with few options. I have to click ESC several times to get rid of the screen. This was not an option before. When I start my computer it used to start normally. How to get rid of the screen? Please advice.

  Photo I took of my mobile is attached.

  Windows 7

  AMD athlon

  Auto system

  Thank you

  Gershom

  Hi all

  Thank you for the support.

  I solved the problem by unplugging the cable from the hard drive inside the CPU and connected again. All is well now.

  If the system is not the start or make obstruction to the start-up stage, you can try the same thing.

  All the best.

  Thanks again John and Gerry.

  Surya Kumar

• When you start firefox, pop-up screen wishes to leave firefox to make changes on the hard disk on the computer. I must say yes, or firefox does not start. Next time.

  Is this a problem of firexfox, or something is wrong with my drive? I don't have this problem when you use IE or Opera, Firefox only. I have to let Firefox to make changes to my hard drive, or it does not start. Once I click on Yes, Firefox works. However, when I close Firefox and try to open it again, the thing is repeated with msg popup to change the hard drive...

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Screen BACK up when you start the computer by using Windows XP

  I did a reinstall of my OS to Windows XP.  Now, every time I turn on the computer, or restart, I get the following message appears on a black screen (BACK):

  (I use the quotes to the messages from the computer).

  "Choose the operating system to start".

  "Microsoft Windows XP Home Edition" (this option is highlighted)

  "Microsoft Windows XP Home Edition" (repeated).

  "Use the top and down arrow keys to move the selection of your choice."

  "Press ENTER to choose."

  "Seconds until highlighted choice will begin automatically."  (There's a digital countdown to 25 to zero... and the computer continues normally)

  "For advanced troubleshooting startup options and for Windows, press F8."

  If I press the key "enter", with the first option highlighted, the computer will resume as usual.  But I've never met this before start screen.

  How can I get the computer to restart normally without stopping on this screen?

  Thank you very much for your help!

  Hello

  You format the drive that had Windows XP and reinstall Windows XP on it?

  The following articles may be useful:
  To specify the default operating system for startup
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_startrecover_default_os.mspx?mfr=true

  How to edit the Boot.ini file in Windows XP
  http://support.Microsoft.com/kb/289022

• Pixellisant when you press the screen - MBP w / retina

  Then... I'm a bit overprotective of my stuff from Apple - start w / that.

  I accidentally pushed my thumb up against the screen and there were some comments/pixellisant (don't know how to call it) which disappeared when I took my thumb off the screen.  Further, I'll make sure not to put pressure on the screen when opening - but, is this normal and is there problems in the long term be wary after doing this?

  Thanks for being patient with me...

  If it is a thing of the time, there is nothing to fear. Just use your Mac as you normally would.

• Satellite M40: Errors graphics when you change the screen resolution

  Hello
  I have a Satellite M40 and a big problem.

  Windows xp pro sp2:
  When a program changes the resolution of the screen, the screen is messed up.
  I see only scratches and only a reboot can run back (or suspend-to-disk).

  [edit]
  I plugged an external monitor to the laptop and it works,
  the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally display also
  [/ Edit]

  Linux:
  This can be seen also at the change of the Xwindows mode in linux back to tty(1-6)

  Here are some pictures of this strange behavior:
  http://www.ronnylindner.de/extern/images/Toshiba/Screen1.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/screen2.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/SCREEN3.jpg

  It looks like a hardware problem, but would it be just a bad bios setting?

  What can I do?

  Goodbye and thank you in advance, Ronny

  Post edited by: [email protected]_DE

  Hello

  There may be something wrong with the screen of laptop computers.
  I guess that the graphics card is ok because the external screen works properly.

  But it s very interesting to know if you are using the graphics driver from Toshiba. If this isn't the case, please check if this problem also appears after installation of the graphics driver from the Toshiba driver page.

• Satellite L50-B-1NM - speakers turned off when you move the screen

  Hello

  yesterday, I got Toshiba L50-B-1NM.
  Everything seems to be ok except for one thing.
  Speakers to stop when the screen is slightly moved. There are positions of the screen, when they work, but just slightly push the screen and they are now closed. Movement of the screen has no impact on its external [helmet], is without a doubt the speakers or its connection.
  I wanted to use warranty, however, I am not sure if it covers this kind of defective. Anyone know?

  And he also said: [even if the warranty is still on]
  Product not available, unfortunately your product is currently not available so please contact your place of purchase.

  Thanks for help

  Thanks for your comments... Great that you can solve this problem

• What is ov4n? When you start the computer, download the message about who and orangevolt 4 - 1.1.1 dll.

  I found this when I went to my "Start" button and went to my computer and it's the first thing under that. It is said ov4n & when I go to open it, it says orangevolt 4 - 1.1.1 dll.  Anyone know what it is? I'm almost afraid to open it but do not want to delete if I need... Help please...

  Hi JackieHoward,

  ·         Have you installed a software recently?

  ·         Have you seen this issue in the menu start earlier?

  ·         What is the operating system installed on the computer?

  Method 1: Check if you find the same in the list of installed programs. If so, try to uninstall it and see if it helps.

  How to change or remove a program in Windows XP

  Uninstall or change a program

  Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Get a box to enter the password when you start the computer

  * Original title: turn my computer

  When I start my computer, I get abox asking you the windows xp startup password.  This has never happened before and I don't know the password.

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to check if you can connect to your account or the account of default administrator in safe mode.

  Check out the link for more information on how to enter Safe Mode.

  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  a. the built-in Administrator account is disabled by default.

  b. you will see an icon for the administrator on the homescreen mode without failure.

  c. connect you (the password will be a white)

  If you are able to start the computer in safe mode, try to check and restore the system.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Please get back to us with the information above to help you accordingly.

• We get an Ox7927f22e fatal execution engine error when you start the computer

  We hit OK then get the screen after that application has generated an exception that could not be treated.  Process id = Ox350 (848) wire Ox354 (852)

  Dear Sir

  After the startup of the computer toward the top of the first alert on my page.

  Extraordinary programmer:

  That the error is the result of a corrupt .net Framework installation.

  -Click on the Start button
  -(If you are running Windows XP, click RUN)
  -(If you are not running Windows XP, continue to the next step and start typing)
  -Type Appwiz.CPL
  -Press enter
  -Locate every announcement of Microsoft .net Framework, click it, and then click the uninstall/remove button. Complete uninstallation.
  -Restart the computer
  -Download .net Framework from the following site: http://msdn.microsoft.com/en-us/netframework/cc378097.aspx

  Click on the button download for .net Framework 3.5 SP1 (to the top of the page).
  -Download, save and run this file. Complete the installation and restart your computer.

  Your problem will be solved.

  Please, update me your status if you have any problems or questions.

  If you are satisfied with my help, please click the button I accept and I indeed will receive credit to this site to help you. In any case, I wish you a nice day.

  Thank you

  Kind regards

  Chauvet J.