Satellite T130-16w does not always

Similar Questions

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

• Satellite P850 138 does not always load

  I have a P850 138 which is a week old. Sometimes when the laptop is stopped the battery does not charge even if the charging light is on. Does anyone else have this problem?

  Chris

  > Sometimes when the laptop is shut down the battery is not
  The problems described by Word sometimes are already problematic.

  How do you know that battery doesn t charge? How much percent shows the battery when you turn to new laptop?

• Satellite T130-16w shortened wireless keyboard no longer works

  Any advice would be much appreciated.

  Toshiba Satellite T130-16w Windows 7

  Several months ago, I deleted some of the bloatware factory on my laptop because of the downturn. I checked that all was not necessary before deleting, I think I might have made a mistake. Since then, I have used mobile internet. Today I came to turn on the wireless function + F8 key does is nothing more. The small menu without wireless/bluetooth does not appear. Without wire is currently disabled and I can't get it there.

  Wireless is enabled in the BIOS. In Device Manager, it appears under the name of work and active. The computer is by all means put in place to use it, I can't get the key to do something, so I can't activate it. Oddly, I turn bluetooth on and off separately, but not wireless.

  I updated the driver for the wireless, but the driver of the shortcut key is not anywhere on the site. I tried searching it elsewhere but he couldn't find for windows 7. Can I use the XP one, or the one of a different model of Toshiba? The T130 section just not return results.

  It sounds like the shortcut key is the question? Does anyone know where I could find the driver? Is it possible to turn on the wireless without using the function key (there is no switch)? As through windows? I have been trying to unravel for 4 hours and got nowhere.

  Thanks for reading.

  Post edited by: wl86

  Hello

  Win 7 requires Toshiba VAP (value added) installation for FN keys work.
  Visit the page of the Toshiba UE driver and you can find the VAP for Win 7 64 bit

  If you need the PPV for Win 7 32 bit, choose another series of the laptop and use the VAP released an another laptop.
  The VAP is not in the laptop series.

• Satellite P20 S203 does not recognize my additional 1 GB memory

  Hi all

  My computer (Satellite P20 S203) does not recognize my second Bank of memory (1 GB). I have two banks of memory of 1 GB installed. BIOS reports only 1 GB, Windows reports that 1 GB and my Linux so he says only 1 GB of memory. I removed each Bank of memory and restarted the computer successfully in each of the two slots, No Problem, but when the two banks of memory are inserted, it always uses only 1 GB. My BIOS is on version 2.10:

  BIOS is the PhoenixBIOS 4.0 Release 6.0

  I know it's an old computer (about 10 years), but what could cause such a problem?

  Thanks a lot for any advice or suggestions!

  Kind regards
  Andy

  Post edited by: fuegi_1

  Hi fuegi_1,

  The upgrade modules, bought exactly?

  To me it sounds like that it s a compatibility problem or your computer laptop doesn't support 2 GB.

  If you use two memory modules, you must only use two modules of the same production.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• iPhone 5 c does not always sound during calls to the.

  iPhone 5 c does not always sound during calls to the.

  Is do not disturb on?

  This is the icon of Crescent Moon at the top right of the screen

  If yes – you can control center - activate by sliding upward on the homescreen of the lower edge and tapping on the icon

  If this is not the case - check to see if these contacts are in your blocked list

• I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP

  Question
  I DOWNLOADED FLASH PLAYER BUT WHEN I TRY TO WATCH A CLIP IT IS SAID TO GET FLASH PLAYER, I HAVE ALREADY. I CONTINUE TO DOWNLOAD, BUT IT DOES NOT ALWAYS HELP. Thank you

  --> Updated Firefox to version 10.0.1

  • How to download and install Firefox on Windows

  Follow the suggestions mentioned in the section "Flash does not work properly or will not update" in the following article:

  • Flash Plugin - maintain and troubleshoot

  Check and tell if its working.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite M30X Pro does not charge on current alternative

  Hello. My satellite M30X pro does not load when it is connected to the adapter sector, I have had the laptop for about a year and a half now

  Is this problem likely to be due to the charger doesn't work does not correctly? I don't want to spend £60 for a new charger, namely the charger works fine, and it's actually something else no longer works correctly!

  Thank you

  Is it possible to use the laptop with the adapter?
  No AC lights?
  If yes then the AC adapter works fine.
  In this case, if the battery is not either of the malfunctions of the battery or the thing will not on the motherboard.
  But mostly the battery fails.

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.