Error code 80070005 dt0000 when you try to install Windows Vista updates

Similar Questions

• Error 0 x 80070103 when you try to install windows vista

  I have windows xp media center edition version 2002 with service pack 3, when I try to install windows vista home basic he said: I do not have enough memory for temporary files and I should free space on my drives. What exactly should I do? I don't have much on my computer to begin and I already uninstalled all unnecessary files, I could think of. Any help would be appreciated thanks.

  Hi sargent_bilko,

  Please use the forum for Support of Vista,

  What is your hard drive? Did you check how much free space on your hard drive?
  Please run the Vista Upgrade Advisor before trying to upgrade to identify your problem:

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx

  Let us know the result of Vista Upgrade Advisor, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

  The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to install windows vista update KB955430, I get the error "WindowsUpdate_800F082F."

  Continue to receive attempts to install KB955430 but get the same error and does not install.  Repeated reboots do not help.  This has happened for several months.

  Well, Carl, I have only 2 suggestions at this point.

  1. start a free incident request for updated Windows support on the problem
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  2. because the SP2 has not been installed (or even offered), start a free SP2 (see previous answer) support incident. Who knows? He might be able to help solve what SP2 & KB955430 installed. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• Error Code D59. -When you try to install Microsoft SQL Server 2005 KB2463332

  I get D59 error Code when you try to install Microsoft SQL Server 2005 KB2463332. Any suggestions?

  Hello

  Try to download and install manually and check:

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D09C1D60-A13C-4479-9B91-9E8B9D835CDC&displaylang=en

  For more information, see this:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Have verizon usb 720 modem for my laptop. 1603 error codes and Error code 2738 appear when you try to install the update for the device.

  Have verizon usb 720 modem for my computer laptop vista Home Premium 32. Here downloaded update but when get novatel driver the device install failed code 1603. Then he checks the previous versions and the installation States. After 1 min error 2738 VBSricpt moment of action custom execution failed. A verizon tech says that it is a windows problem. Another says that it is a usb device bad 720. Verizon says the rssi-rtt and the rssi on there network evdo should be about - 80 and my poster-98 device manager and-88 most of the time. With 3 bars of signal, they say it's the 720.mkv that's a bad camera or laptop? Can not stream video and Media Player even freezes. Have updates and it started 2 months ago. Any help don't want not to block 2 years for a new modem, if no change. Or would it be the laptop? Thanks for any info.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  Or here:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  They will help you with your question in the Forums above for Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 0 x 80004004 when you try to install Windows Security Essentials

  Hello

  I recently tried to update messenger and other programs as it said that there was an update. I went ahead and did and it do not install because it says theres an error and its 0 x 80004004. Now, I then tried to uninstall essentials of blah of Panel and control... clicked on the essentials then uninstall but nothing happened, so I advanced and tried the cleanup utility but he deleted all the programs, and when I try to reinstall essentials once again he comes to say an error has occurred and that its 0 x 80004004. So im desperately need some help here! Please answer as soon as possible. Thank you.

  Have you seen the reference in French -

  Several Error Codes when installing photo gallery. '0 x 80004004' being the most common one.
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/da2b4f0a-6525-417C-99e0-0d16609d3808

  «Windows Live Communications Platform could not open key: UNKNOWN\Components\9ADA8EA9BDD\940E57139A9FD3A4F891CAF90B54411D.» Check that you have sufficient access to that key or contact your support team. Please close all other open programs, and then try again.  It looks like a another program prevents the installer from working. HR:0 x 80070643.

  If you haven't, read the rest of this comment and try these suggestions of 'Jeremy K' and let us know the result.

  As far as I can tell the last unknown component means Live SkyDrive.  It is found in the registry location on my machine

  HKEY_LOCAL_MACHINE-1-5-18\Components\C5882577357ACD113841800002C0A966

  He also mentions this location
  C:\Program Files (x 86) \Windows Live SkyDrive\Microsoft.Live.Folders.RichUpload.3.dll

  Make sure that your user has the correct for the location of the registry key and file access permissions if they exist on your machine.

  The first unknown element you had made reference to Contacts.  Then check the access permissions are correct.

  HKEY_LOCAL_MACHINE-1-5-18\Components\9ADA8EA9BDDCBAA48A323279D13EB778

  mention this place.
  C:\Program Files (x 86) \Windows Live\Contacts\abssm.dll

  You may find the help you desperately need in this more specific forum.

  Installation and upgrade Windows Live products Threads
  http://www.windowslivehelp.com/forums.aspx?ForumID=a372972e-8e7a-4d85-ADC3-a1b43e8c02ec

  Code: 0 x 80070643
  Description: Fatal error during installation.

  • SID: S-1-5-18
    Name: Local System
    Description: A service account used by the operating system.

  Make sure that the user called "System" also has access to these places, I mentioned earlier.

  To restore default security settings, follow the instructions of Vista in the present.

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• Error 0 x 80070424 when you try to install the recommended updates or custom

  Help, please!

  This error message when:

  1. in Internet Explorer, choose Tools-> Windows Update

  2 Update site analyzed successfully updates

  3. offer to install via Express or custom

  4. after the selection of * either * of these options, the next screen shows:

  >>

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  Method 1:
  I suggest you try the procedure described in the link and check if it helps.
  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall
  http://support.Microsoft.com/kb/968002/en-us
  Method 2:
  If the problem persists, you can try the procedure described in the link and check.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  For more information, please see the link.

  "Internet Explorer cannot display the webpage" error in Internet Explorer
  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  NOTE: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  
  I hope this information helps!

• Error 0 x 80070570 when you try to install Windows 7 Ultimate.

  Welcome, I'm going to buy WINDOWS 7 ULTIMATE. When I install this system, see ERROR 0 x 80070570. OK, I'm going to the store and change to the other disk. Once again the ERROR. Can someone help me? I'm sorry for my language because I am from Poland.

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7 try the gain Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com upgrade