Whenever I have insert a device into the port I heard an unusual noise from my laptop

Similar Questions

• Hello - I have inserted some images into the design feature, but they do not appear on my browser.  Little green issues are where pictures should be.

  The program I use is Dreamweaver.

  

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

  There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

  Original title: coordinator.exe no disc

  I got this message after installing BitDefender antivirus.
  It turned out to be partly because of WinPatrol - who had not been uninstalled.
  And the program uninstal delete his entry autostart nor its program file.
  Which has supported, manually, the end of the message...
  But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

• Insert some values into the database of field boxes

  
  
  
  I had a similar probem and error when you use the drop-down list instead of a checkbox. It was solved by putting the SELECT name = "CarMake in the menu dropdown.
  
  But in the box, I don't know?
  I seem that the problem is the action page has the Form.carmake, but the page does not work. What Miss me and where should I put in the entry below page.
  
  
  The main objective is to have checked checkboxes to insert some values into the database field carmake based on what is checked.
  
  
  If the Honda checkbox is checked then
  It inserts into the carmake field value Honda.
  
  If the Toyota checkbox is checked then
  It inserts into the carmake field the value of Toyota.
  
  If both are true then 2 rows are inserted two values
  Honda and Toyota.
  
  Ditto for the last option.
  
  Thanks for your help
  
  
  Here's the error again
  
  error:
  Error occurred while processing request
  CARMAKE element is not defined in the FORM.
  
  12:21:50.050 - term Exception - in C:\CFusionMX7\wwwroot\Author\CarAddAction.cfm: line 16
  CARMAKE element is not defined in the FORM.
  
  line 16 is:
  "#Trim (Form.carmake), #
  Join the Code
  
  
  <! - Here is the form - >
  < html >
  < head >
  < / head >
  
  < body >
  
  
  < h1 > < / h1 >
  
  < table >
  < action = "CarAddAction.cfm cfform" method = "POST" > "
  < b >
  < td > Honda: < table >
  < td > < Center > < input type = "checkbox" name = "HONDA_MODEL" value = "HONDA" checked > < / center > < table >
  < /tr >
  < b >
  < td > Toyota: < table >
  < td > < Center > < input type = "checkbox" name = "Toyota_MODEL" value = "Toyota" Unchecked > < / center > < table >
  < /tr >
  < b >
  < td > SUBARU: < table >
  < td > < Center > < input type = "checkbox" name = "SUBARU_MODEL" value = "SUBARU" unchecked > < / center > < table >
  < /tr >
  
  
  
  < Tr > < td > < table > Honda model
  < td >
  < input type = "Text".
  name = "Honda_Model".
  Value =""
  size = "22".
  MaxLength = "20" >
  < table >
  < tr > < /tr >
  < Tr > < td > < table > Toyota model
  < td >
  < input type = "Text".
  name = "Toyota_Model".
  Value =""
  size = "22" >
  < table >
  < tr > < /tr >
  < Tr > < td > < table > Subaru model
  < td >
  < input type = "Text".
  name = "Subaru_Model".
  Value =""
  size = "22" >
  < table >
  < tr > < /tr >
  < td > < table >
  < td >
  < input type is 'submit' value is "Take Add to database" >
  < table >
  < /tr >
  
  < / cfform >
  < /table >
  
  < / body >
  < / html >
  
  
  
  <!-action page
  --------->
  < cfdump var = "#form #" >
  < name cfquery = "InsertCarInfo."
  DataSource = "#request. MainDSN #">"
  INSERT INTO Car_tab)
  car_Make,
  Honda_Model,
  Toyota_Model,
  Subaru_Model
  
  )
  VALUES)
  
  "#Trim (Form.carmake), #
  "#Trim (Form.Honda_Model), #
  "#Trim (Form.Toyota_Model), #
  "#Trim (Form.Subaru_Model) #
  )
  < / cfquery >
  
  

  You check in one or more of the boxes before continuing? Remember what I said about the form field box existing only on the page of treatment at least 1 or more checkboxes are checked on your form. Make sure you use to avoid this problem.

  What happens when you take a look at the output of your dump of form? Your fields are present?

• Whenever I have download an image with the command "save the image under...". ", it records in a useless file of 168 bits.

  As stated, whenever I have download an image with the command "save image under" he recorded in a useless file of 168 bits. This does not happen everytime I have save an image, but more often the not, and I don't have a lot of useless files hang out because of this. Is it possible to re - download each image 168 bits that he should have been downloaded in the first place? Is it possible to ensure that this does not happen?

  Here's what it looks like:
  http://i.imgur.com/yzgwwgC.gif?1

  This means that you are not allowed to do this action.
  The site could use a transparent overlay image to protect the actual image or otherwise has put in place a protection.
  You can check if see you the image in "tools > Page Info > Media ' and save it.

• Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the arear connection is at the top. Virtually all nearthe fields are dead. I have no problem going into the fields to halfway to the bottom of the screen. Chrome w

  Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the login box is at the top. Virtually all of the fields near the top are dead. I have no problem going into the fields to halfway to the bottom of the screen. It comes to Chrome and it works very well.

  I suggest you only begin by taking the measures recommended in this support article.

• Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image

  Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image for each photo, instead of actual miniatures of the photo itself.  I can't find the pictures I'm looking.  Why is this happening and how can I solve this problem?

  This parameter can be:

  (1) open Folder Options (search for your search box on the start menu to find)

  (2) on the display tab, verify that the "always show icons never thumbnails" is off (disabled)

• my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• Whenever I have upload a picture on the desktop opens up Photoshop. Stop that

  Whenever I have upload a picture on the desktop opens up Photoshop. Stop that

  Safari was the problem. I turned it off in Safari.

• I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  I have just insalled LR6 into the dev module, I see no picture, but only a blue window with lines through it. Can you help me??

  In the Lightroom preferences, uncheck the box, 'GPU use' on the performance tab.

• How can I insert a slideshow into the reflow?

  How can I insert a slideshow into the reflow?

  HI -.

  There is not currently a way to insert something like this in the reflow, so your best best is to export the reflow code, then edit it in another tool such as Dreamweaver to add additional content.

  Hope that helps and thanks for using the Reflow!

  VIC

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• It tells me to insert a cd into the cd-r/cd-w, but there is one in there.

  I am doing a cd from my rhapsody library and it seems cannot detect the blank cd.

  First of all, please tell the forum the Windows® version, edition and the level of service pack, your system is running.

  Second, please tell us the manufacturer and model of your system so packed.  If not packed, please tell the manufacturer and model of the system motherboard.

  Thirdly, what brand and model is the optical drive in question?

  Finally, please read: KB555375 - how to ask a question

  Generally, there are several things you can do in this situation:

  • First, open the Device Manager ( r devmgmt.msc/s), click on the plus sign in front of the CD-ROM/DVD-ROM drives, click with the right button on the troubled giving drive and select "Update Driver"... ».  (It probably won't, but it's worth a try).  If nothing happens, again right click and select "Uninstall" and then restart.  The optical device driver is reinstalled after rebooting.  This will reset the driver stack.
  • Check for loose cables, connectors and (especially on laptops) corrosion on the contacts
  • Article Read Microsoft® Knowledge base 316529, reader of CD - R or CD - RW is not recognized as a recordable device (A Mr. Fixit)
  • Read your CD or DVD drive cannot read or write media (A Mr. Fixit)
  • Finally, if the optical drive is older, she doesn't have a firmware that recognizes the media inserted (CD±RW, tickets, etc.).  In many cases, there may be a firmware update available from the manufacturer of the drive or the system package manager.

  If you had told us the system and the manufacturer and the model of player, we have been able to check it for you.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!