Whenever I restart my computer, SolutionCenter.msi error - path / file not found

Similar Questions

• Whenever I restart the computer, get an error message rundll Securitycrt\Appapint5.dll is missing.

  missing appapint5.dll file

  Whenever I restart the computer, get an error message rundll Securitycrt\Appapint5.dll is missing.  Then cannot rely on automatic updates.  Wait they are related.  Could not find the Appapint5.dll file on the ms site.  Runnig XP.  What I can do, or have been find file?
  CB

  It is the Trojan horse!

  Technical information
  Virus name:	Trojan.MulDrop3.7713
  Found:	Dr.Web
  TO ENSURE THE DISTRIBUTION AND THE AUTORUN: Modifies the following registry keys: [\Software\Microsoft\Windows\CurrentVersion\Run] "Acrocfgclass" = "rundll32.exe"\isaNetARM\Acrocfgclass.dll",Appapint5 LibGLmm' MALICIOUS FUNCTIONS: Running the following: \rundll32.exe "\isaNetARM\Acrocfgclass.dll",Appapint5 LibGLmm ". \rundll32.exe "% TEMP%\userMouseCtrl.dll", Appapint5 xpMainInterval CHANGES THE FILE SYSTEM: Creates the following files: \isaNetARM\Acrocfgclass.dll %Temp%\userMouseCtrl.dll Deletes the following files: %Temp%\userMouseCtrl.dll VARIOUS: Research for the following windows: ClassName: 'indicator' WindowName: " ClassName: 'CRLobjTray' WindowName: " Please note: some characters are replaced with symbols in order to prevent inappropriate access to malware.

  Steps to automatically remove the "Trojan.MulDrop3.7713".

  Download Dr.Web CureIt! and save it to the desktop. Download security space Pro 7.0 (32/64 bit), save it to the desktop. Restart the computer using safe mode (press F8 before any Microsoft logo appears). Double-click "cureit.exe" on desktop, follow the instructions on the screen to scan the hard drive. (Wait a few moments, it may take from 20 to 60 minutes to perform an analysis of the express) Once the scan is complete, select all viruses find and choose "Cure." (If some files are not suitable to be healed, choose 'Quarantine' or 'Delete'). When all detected viruses are cured, quarantined, or deleted, restart in Normal mode. Uninstall antivirus software existing that can not kill the virus and then reboot again. Navigate to the Pro area security configuration file on the desktop, double-click to run it. (For procedures, please refer to the video installation guide.) During installation, choose to get a demo key. After the first update of time, the scanner will be launched again, leave the scanner at this stage. Complete the installation by restarting the computer. If time is allowed (possibly several hours), perform a full scan of Dr.Web Scanner. Note: If it is impossible to start Windows because of the infection by the virus, try Dr.Web LiveCD or Dr.Web LiveUSBinstead of Dr.Web CureIt! The time required for quick scan or full scan depends on many factors, such as the performance of the system, memory available, running processes, number of discs and files, etc..

• Run-time error '48': file not found t2win - 32.dll

  Since I've updated my Astrocalc program I can't program to open on my desktop. I get the message: run-time error '48': file not found t2win - 32.dll.

  You have any ideas how I can fix this problem please?  I have been trawling the web for months on and outside, but had nowhere :-(

  Gill

  The file t2win - 32.dll is a Visual Basic Runtime file that should be installed by the AstroCalc program.

  Suggest you contact them and get the latest AstroCalc version that supports Windows 7.

• cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

  cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

  I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  It worked, now I'm back in business!

  PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.

• LoadPanel fails with error-94 file not found code unless I am in debug mode

  I've written a dll that has a number of panels in a .uir file.

  When I have it, debug using "debug SeqEdit.exe", everything works fine.

  But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)

  "Error in the call to LoadPanel.

  Handle of parent of Panel: 0,

  The IUR filename: HiPot.uir.

  Resource Panel ID: 4.

  Error code:-94

  File not found. "

  The IUR file is always in the same place, the only difference is that I do not use the debug option.

  It's probably something simple I've forgotten?

  You should not use LoadPanelEx in this case?

• VM won't turn on. Error message "file not found".

  Guys,

  One of my VM to ESX 3.5 that worked very well, does not start after a power failure. When I walk to the Victoria Cross, a "File not found" error message appears in 95% and process fails. I have attached, attached log file. What could be the resolution?

  SSebastian

  It seems that the ROW you added as "scsi 0:1" is no longer available. Check the ESX host storage tab and check whether the logic unit number is always available.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• SP 3 installation error message: "file not found and the installation is stopped.

  Original title: Setup servicepack3 error

  received message error servicepack3 file installation will be locater and installation is stopped

  Hello

  1. you try to install Windows XP service pack 3?
  2 are you able to install other updates?

  I ask you to download and manually install the Service Pack for Windows XP. See the link in the article below to download the pack.
  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717/

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 7: File not found for executable

  Hi all

  I have a problem with a server VI call.  I am currently using LV 2011 on Windows 7.  That is the problem - I have a secondary to a greater VI in which I drop the interface of a stand-alone (potentially) VI.  The path to the called VI is good (in both the exe and the application of development).  However, I get an error 7 when I try to use the "Open Config Data.vi".  Specifically, I make the description that it cannot find the VI in the Library Load.vi (called by Open Data of Config).  I tried especially adding the config set in the build library, but this doesn't seem to help.  In addition, the screws of config are called in the main application without problem.  Does anyone have any ideas?

  Thanks, Matt

  
  

• Error 1308: File not found

  I have windows vista, and I try to install Fable: The Lost Chapters. I installed it before, but I uninstalled it to make room for other stuff on my computer. Now, I try to install it again. I still all the requirements, but when I try to install it, the installer says that it cannot fine one of the files that is supposed to be on the disk. The drive is in any way damaged or corrupted. Can someone tell me why it does not work?

  Hi Helial,

  This problem occurs if the Microsoft Windows Installer Service is stopped or disabled.

  1. Click Start, type services.msc in the start search box and press on enter.
  2. In the list of Services (Local) , right-click Windows Installer, and then click Properties.
  3. If the drop-down list Startup type is set to the value off, select the Manual option in the drop-down list Startup type and then click OK.
  4. Click the file menu, and then click exit.

  Reference: http://support.microsoft.com/kb/873281

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why is is necessary to "Refresh" FF50 whenever I restart my computer

  Recently, I've migrated to FF50 on my machine Windows 10. I find now that whenever I restart my computer, FF50 'hang up' and will not operate. The solution seems to be to open the troubleshooting feature and call option "Refresh" (which of course sweeps a lot of critical presets such as the web pages that popup blockers are allowed, etc.).

  Why is this happening? What should I do to cause FF50 stay functional through a reboot?

  Thank you, can you please try the following configuration changes and see if it improves the page load problem: enter Subject: config in the address bar of firefox (confirmed the message information where it appears) & search for the preference named browser.tabs.remote.autostart.2. Double-click it and change its value to false , then restart firefox once for this to take effect.

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

• Don't rip CD - error "file not found".

  I'm trying to rip CDs.  The player will open and read the CD but when I try to copy the CD, I get this error message "file not found".  When I try to change the location where the ripped files should go, there is no location listed and I can't change it.  It is as if he is not anywhere, for music to go.  Help!  I am a music teacher and need!  It's used to work very well!

  In the WMP library, you click on organize and select manage libraries - music. What places are? If there is no available location, remove them and also make sure that the default saving location is set. Do the same for the other libraries (videos, pictures, and Recorded TV).

  If this does not help, close WMP, open Windows Explorer, right-click the music library, select properties and click on restore by default. After that, make sure that a backup location is defined (as indicated by a check mark).

• File not found error when opening a virtual machine (from No-Time Machine backup)

  Hello world

  I have a problem with my installation of Fusion 2.0.6 on my iMac to Snow Leopard related to a "file not found".  I did my best to analyze the positions of the community to see if anyone has experienced this before.  I found several posts and tried the suggestions in these posts, but I have not been able to solve.

  I'm trying to restore from a full backup of my XP VM. It's not a backup Time Machine; just a straight backup of VM together using SuperDuper (part of my nightly backup routine).  To restore, I copied:

  -> BACKUP/users/John/Documents/Virtual Machines/Windows XP Home Edition.vmwarevm

  for -> MacHD/users/John/Documents/Virtual Machines/Windows XP Home Edition.vmwarevm

  Merge, I opened the Windows XP Home Edition VM, only to get the error:

  «File not found: Windows XP Home Edition-000005 - s001.vmdk.» This file is required to power on this virtual machine.  If this file has been moved, please provide its new location. »

  I find the file hard (what is there) and get the same error message several times.

  Interestingly, when I try to open the same VM from the backup location, I also get the same error.

  Really stuck now and don't know what to do.  Any help that can be provided would be greatly appreciated.

  Thank you

  John

  It seems that the latest files are missing. The virtual disk which I guess has a size 5-6 GB provisioned consists of 3 files, of which 2 are missing for snapshot 000005 (Windows XP Home Edition-000005 - s002.vmdk and Windows XP Home Edition-000005 - s003.vmdk). Unless you have some backup, your options are limited and you will need to go back to the last instant whis is dated March 2012.

  Windows XP Home Edition - 000005.vmdk descriptor file (text file) will show the files that make up the virtual disk (the Flash disk in this case).

  André

• Error file not found in CS 5.5

  When I open PP CS 5.5, it provides a list of possible projects, I can open. Click on a project and the opening as a result. However, in the last 2 days, it became problematic. I can click on the draft list, but I now have an error message: file not found error. PP does not open upward. I did not move all the files, folders or projects autour. I simply closed the project, leave PP and then open it again when you want to change. I tried to open the auto saved the project file and I get the same message?

  What happens if you try to open the project by double-clicking it to start to Premiere Pro, Premiere Pro not opening first by clicking on the entry in the home screen?

  What happens if you open Premiere Pro, create a new project and then go to file > open project?

  I want to come is that it seems that Premiere Pro is not find the project in the home screen, which is very different from Premiere Pro is not able to open the project file.

• Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL

  Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL is not found. Someone knows what and how to find it to download on my computer.

  Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL is not found. Someone knows what and how to find it to download on my computer.

  Assuming that the spelling of the missing dll file is correct your computer is probably infected by malicious software. Click HERE, download, install, update and perform a quick scan with Malwarebytes. Once the completed scan click HERE, download and run a quick scan with SuperAntiSpyware Portable.