Whenever I start my computer I am prompted to enter my product key, when I go in I get an error message: 0xC004E003.

Similar Questions

• When you try to evaluate the performance of the computer of my PC for the first time in 64-bit Windows 7, I get an error message stating "Windows Experience Index for your system could not be calculated."

  The error message also indicates: "cannot complete the assessment. The assessment or other operation did not complete successfully. This is due to an error reported from the operating system, driver or any other element. »

  I did a full install new (custom) on two WD Raptors (10,00 RPM) RAID 0 (striped).  All used harware succeeded in Vista Ultimate o/s is first available.  Current material as follows:

  Windows 7 Professional 64 bit Build 7600 v6.1.7600
  EVGA nVidia nForce 780i SLI card mother ATX
  Intel Core 2 Extreme QX9650 processor
  8 GB (4x2Go) Patriot Extreme Performance Viper Series DDR2 PC2-6400 low latency memory twin Kit, SLI-Ready (with CL Timings of 4-4-4-12 @ 2.1V)
  2 x WD 150 GB 10 K rpm 16 MB SATA NCQ in RAID 0 (striped)
  Samsung 22 x DVDRW SATA Lightscribe
  750TX (750 watts) Corsair power supply
  2 x OC from BFG GeForce 8800GTS 512 MB GDDR3 video cards in SLI
  Map its Creative SB X - Fi XtremeGamer

  All PC settings are standard (ie: no overclocking component) and all windows updates are completed.  Latest drivers installed for the video & sound cards.  Last firmware & driver for optical drive installed also.

  Any ideas as to why I can't receive a rating system for Windows Experience Index with success?  Thank you

  Stuart

  OK, I was on the phone with support for about an hour.  Problem has been resolved.  Turn user account control either the lower or penultimate level.  This version fixes the problem!

• whenever I start my computer, I have a message that readsusername and the password do not match. How can I remove this message to come whenever I start my cpmputer more?

  whenever I start my computer a box appears in the middle of my screen with the title identify yourself and the message user name and password do not match (you provided xxxxxxxxxxxx).

  I would like to know how I canremove this message appear each time I start my computer?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the version of the operating system that you are using?

  I suggest that you try following the steps mentioned below, that if you use Windows Vista and Windows 7 and check to see if it helps.

  Step 1: Check in SafeMode with network.

  You can also check if the problem persists in safe mode with network and check.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

  Step 2: Perform a clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• I need to reconnect my DAQ hardware, whenever I start my computer... Why?

  Hi, I'm Ricky, a process engineer intern at a company. I'm still new to LabVIEW and NI MAX. We have a cDAQ9181 set up for air tools and the other in place for an encoder. Now, whenever I start my computer the compressed air tool box is already connected, as expected. However, the encoder it is not. When I click on it in the sidebar, it lies and connects, but the encoder itself does not connect until I have perform a self-test. These devices have slept hip and connected from one day to the next and no issue performance - they must be connected as soon as the computer is on. Anyone know what is happening and how to fix this? I can try a picture if needed.

  Thank you for taking the time out of your day to offer some help value! -Ricky

  I did some research, and it may very well be that this is expected behavior.

  Before being able to run OR-DAQmx tasks on a network cDAQ chassis, you must book the current host system chassis. Through the 'test' you do, I think that it also reserves the chassis. When a chassis cDAQ and PC lost communication due to the system powering down, the chassis must be reserved by the system host again. 'Sleep mode' could also be a problem because most of the PC systems unplug or turn off ethernet after a certain period of inactivity. To avoid having to go through MAX OR book the chassis, you can use the "reserve Network Device.vi DAQmx' who book you the chassis cDAQ for the system calling the VI.

• Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  All this began after Microsoft security essentials did an update in February.

  Hello

  Method 1

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you perform the disk check and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  hope this helps,

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• Whenever I start my computer, a message appears: "error loading C:\WINDOWS\ufidehipen.dll. The specified module could not be found. Can't fix it!

  Whenever I start my computer, a message appears:

  "Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."

  Once the message is erased my computer works normally.  Ironically received a hoax call, claiming they were from Microsoft Support.  I did not claim.  Have security of Norton 360.  A run 'getcleaner' and ' getmalwarebytes.  A ran all the Microsoft diagnostic tools and still have the same problem.
  If anyone can help with a solution to my computer problem?

  Hi Caspwilson,

  Not answering all calls for support!

  Download CCleaner from www.piriform.com/ccleaner and scan your system.

  I hope this helps.

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.

  Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.  This happened for several months, but I just ignored him.  Don't know if it's related, but a user cannot disconnect without pressing the Windows key and the "L" key at the same time.

  Tonight I ran a registry repair program, and it fixed a lot of errors.  But, always, the message came after a reboot.  I don't know what it is, what it does or how to remedy the situation. Can anyone help?

  Thank you!

  You may have damaged even more by running a registry cleaner for Windows. The best registry cleaners are snake oil, and at worst they will damage MS Office and sometimes Windows itself. Details:

  http://aumha.NET/viewtopic.php?t=28099

  For the problem, Googling for this file appears your post. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• How to make an excel file opens automatically whenever I start my computer? ___

  How to make an excel file opens automatically whenever I start my computer?
  

  Put a shortcut to the file in your startup folder.

• I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail, I click on it but do not change it and it works fine until I restart. That is what it is? Thank you!

  I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail.  I click on it but do not change it and it works fine until I restart. Everything else works fine. That is what it is? Thank you!

  gezer2u,

  Try to record your username, then back in then try to restart your computer and see if the problem still persists.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I start my computer this display error in c:\windows\system 32\nvmctray.dll entry: nvtaskbrinit

  Whenever I start my computer this box apiers error in c/windows\system 32\nvmctray.dillmissing entry: nvtaskbrinit

  Hello.

  It is what explains what it is. I find a slightly different spelling (you are missing an 'a' in your nvtaskbrinit).

  http://www.bleepingcomputer.com/startups/Rundll32.EXE_...NVMCTRAY.DLL_NvTaskbarInit-3827.html

  See you soon.

• Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. »

  Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. "How can I fix it?

  Since my answer does not resolve your problem, please do not mark it as the answer.  I would like to deselect you.  Thank you.

  Try a clean boot of your PC and see if the error persists. Exactly how is determined by your version of WIndows and so far you have not updated this thread to let know us what version of Windows you are using.  Do now.  Click on modify under your original message and change the drop-down windows to indicate your version of Windows.

  You can also see items here: http://support.microsoft.com/search/default.aspx?mode=a&query=perform+a+clean+boot&spid=global&catalog=LCID%3D1033&1033comm=1&ast=25&ast=28&ast=30&ast=31&res=10