Whenever I try to open any program on my computer, a message from 'C' appears and tells me that I do not have access, or a path cannot be made, what should I do?

Similar Questions

• Whenever I try to connect to the internet, preparing to install "Sonic activation module" appears and tells me to insert a disc.

  Hi every time I try to connect to the internet... .a to install the 'Sonic activation module'... .comes upward, then he told me to ' insert the diskette and click ok "... What is and how can I get rid of him? I don't have this drive. I'm on windows xp. Thanks for your help, Pat

  original title: sound activation module

  Seems to me there was a company of game named sonic. We recently hired a game. If Yes (or someone who uses the computer did) you must go to the installation and finish it or uninstall the game.

  If this does not work, you could get the free CCleaner and run it but you need a little knowledge to use it. You can watch the start section and see if a program loads the name sonic inside or somewhere in his speech. Delet it is probably correct, but it is best to uninstall the program, get the free RevoUninstaller might help if the windows uninstaller is corupt (CCleaner uses only that). It's a little harder to use, but he'll come down.

• Whenever I try to open a program I get a message "choose the program you want to open this file with.

  Hi, whenever I try to open a program, I get the prompt and a window asking to to choose me a program to open this file with, I recently added mcafee and now when I click on the icon and other icons on the desktop, it invites this window, could he be bound, what can I do? Help!

  Hello

  Try the system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Its control panel - backup and restore center - left upper repair Windows

  SO which opens also to use the below to execute.

  Start - type in the search box-> rstrui.exe CONTROL the top - top - right click RUN AS ADMIN

  or use start - computer or Windows Explorer to navigate to

  C:\Windows\System32\rstrui.exe

  Top - right click RUN AS ADMIN

  =====================================

  To run a particular program until get them you all back to the normal fair use start - search and type in the
  program name or the name of the executable file - OR use start - computer or Windows Explorer to access to the
  program, and run it from there.

  Define your main program associations, and then you can edit any type of file to the correct program.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Whenever I try to open a program, this message appears "Service.exe - Entry Point not found", it is on windows 2000 OS

  Whenever I try to open a program, this message appears twice "service.exe - point of entry not found" is on the Windows 2000 OS

  I hope this helps:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324762

  If not, you may need to reinstall the OS Win 2 K / Service Pack

• 'C:windows\system\run1132.exe' when you try to open any program.

  C:windows\system\run1132.exe

  I try to open any program on my pc and all I get is

  C:windows\system\run1132.exe

  Hi kennyken,

  It seems that it is a virus infection.

  ·         Which antivirus program is installed on the computer >?

  You can run the Microsoft to check security scanner for any infection by virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• I can't open any .exe (including regedit.exe) file - if I try to open any program, I gives me an error that the application is not found.

  I can not open all .exe files, including regedit.exe cited as a means to correct this type of error.  If I try to open any program gives me an error that there are no application or the 'Open with' window opens asking me to choose my program.  However, I can open the Word Document, although if I try to click on any shortcut to Microsoft Word it says application is not found.

  I had a virus on my PC and used Malwarebytes to remove it.  The deletion was successful, but he seems to have created this new problem.  I don't know if it is directly related to the kidnapping, or whether the virus changed anything while he was active?

  Thanks for your help.  :)

  Your ".exe" file association is probably damaged.
  To fix it, follow the instructions on this page for the attachment of .exe file associations.  Be sure to read the note at the top of the page specifically about the special considerations to fix .exe associations.

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Receiver prompt "choose a program to open with" when you try to open any program.

  original title: programs

  Whenever I click to open a program in another window opens asking me to choose a program to open with. How can it define how far he runs automatically? and why this is happening?

  Open with appears whenever I try to open a program

  http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

  Scroll down to the answer given by Phantom010:

  Download and merge the reg. EXEFIX .

  quote...

  Try this registry fix: EXEFIX

  Unzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.

  Reset.

• Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use

  Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use.  Problem is that I'm not running anywhere.   I checked my task manager, and is not in the applications or processes.  I tried to restart my computer a couple of times, correctly and a hard reset as well and nothing works.  Google Chrome and Internet Explorer are the two works very well.  Help, please.

  Original title: loading Firefox problem

  Hello

  I suggest that you are looking for or post on the Forums of Firefox.

  http://forums.mozillazine.org/viewforum.php?f=38

  Don

• Whenever I try to load a program I get an error message

  Whenever I try to load a program I get an error message / is not a valid bencoding, how can I stop this

  original title: cannot load programs.

  Hello

  1. What is the name of the programs/Applications you are trying to install?
  2. Is the issue limited to a particular application or occurs with any application you are trying to install?
  3. What the exact error / message code you receive while trying to load?
  4. What antivirus do you use?
  5. You did it all changes to the computer before this problem?

  Method 1: Resolution of problems running the program:

  Open the troubleshoot program compatibility utility

  http://Windows.Microsoft.com/en-AU/Windows7/open-the-program-compatibility-Troubleshooter

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2: Click the link below to provide newspapers:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Reference:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  It will be useful.

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"

• My computer freezes whenever I try to run ANY program creative cloud

  I am using ASUS N56VZ - S4431H which has Intel I7 - 3630QM, GT650M from NVIDIA and 12 GB of RAM. I am running Windows 8.1 Pro on my computer. Over the past two days. whenever I try to launch a program of creating Cloud (Photoshop, Illustrator, After Effects), my cpmputer freezes. I have my SSD, RAM and HARD disk checked and no error appeared. Everything is OK according to the tests. Any ideas on this subject?

  Thank you!

  These steps did not work either, but I solved the problem. It is caused by the latest driver from nvidia (372.54). I removed the driver and install an older version (368.39). There are no problems now. Thanks a lot kstohlmeyer1 .

• When I try to open any program or file the only thing that opens is Windows Media Center

  * Original title: only the open Windows Media Center

  Every time I try to open a program or file, the only thing that opens is windows media cente.ive had set up a new account just to be able to use my lappie, I have no point of restord

  Hello

  You can check out the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Try running the fixit and see if it helps:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Hope this helps,

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Whenever I try to open a program out the media center! Looks like all my programs need to open with this program but the library doesn't recognize any of this so it wont open all...

  Can't open anything

  Hi Karpaholix

  I would like to ask you a few questions to help focus in the right direction:

  Are there other specific details that you can provide that will help us understand and solve your problem? Since when you receive this error message? Have you made changes to your system?

  We can try a few steps and try to solve this problem.

  A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.

  Open default programs by clicking the Start button, click default programs.

  In the default programs, you can:

  ·         Set your default programs. This option allows to choose the programs that Windows uses by default. If you want to use your Media Player to open all media files, use this option.

  ·         If a program does not appear in the list, you can make the default program using set Associations.

  ·         Open default programs by clicking the Start button, click default programs.

  ·         Click associate a file type or Protocol with a program.

  ·         Click on the file type or protocol that you want the program to act as the default.

  ·         Click on the program of change.

  ·         Click the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)

  ·         Click OK.

  You can also check out this link for more details to make a default program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Let us know if it worked!

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• whenever I try to open any image editing with paint-it tell me it is not a valid WIN32 application

  I click on the thumbnail as usual, then I click on the icon of the painting - but I list asking me what program I want to use to open the file (usually jpeg - but mostly ANY file of the photo.  When I click on paint-i tells me that is not a valid WIN32 application.  It worked perfectly until I was told one have a fake version of windows on my computer.  I have a legitimate version but when DELL sent me my computer the doesn't have to send me a copy of windows, only a so-called repair disc that does not work.  mainly, I just want to open my photos with the paint change.  but I you might fix this confusion with the legality of my copy of windows that would be great.
  I tried to contact dell at this topic but no response yet.  I am physically disabled and the computer is my "lifeline" to my friends and my family.  Please help me with this.  Thank you.  Robert

  Hello B0bman1,

  Thank you for your message.  Let's try combining .jpg with paint.  Please follow the steps below:
  Open Windows Explorer by right-clicking on the Start button and then click Explore.

  Click a folder that contains a file of the type you want to Windows to open in a program you select.

  Click on the file and, depending on the programs installed on your computer, do one of the following steps:

  Click Open with to choose the program you want.

  Point to open with and then click on choose program to choose the program you want.

  The open with dialog box appears. Use one of the following methods to select the program you want to use for this file type:

  List programs, click the program you want to use.

  Click Browse, find and then click the program you want to use, and then click Open.

  Click Look for the appropriate program on the Web to surf the Internet for the program you want to use.

  Click to select the always use the selected program to open this type of file check box if it is not enabled.

  Click OK.
  Found at http://support.microsoft.com/kb/307859
  Please let us know if it did or it does not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.