HELP ASAP! problems with hp pavilion dv2500 display driver

Similar Questions

• Problem with Half Life 2 display driver

  Please can someone help me?
  I just installed the game (Half Life 2)
  whenever I play the game everything is fine until I have quit the game, my laptop fell down and restarts.
  the error report I send said that there is a problem with my display driver.
  before I start the game, I get a message that says that my display driver is outdated and that I could get in trouble, because my computer is a laptop, (Nvidia) do not carry the Toshiba drivers.
  I've been on the Toshiba site and they have no display driver newer than the one I use now.
  Please could someone suggest something I could try.
  and Toshiba will bring a driver updated in the near future? This really seems a pity that the game seems to work verywell accept for this problem that exists.
  My laptop is a Toshiba Satellite P10 with a Nvidia G-FORCE FX GO5200 card inside.
  Your M Lovett.

  I have the same card and I get the same message, however without crashing.

  you have installed all the updates/fixes you can to ACE this may solve the problem.

  What about drivers who are the cause of the accident, one of my friends had a lot of problems with regularize them and crashing and it was running the game on a custom platform so maybe it's not that the real fault.

  [Edited by: admin 30 May 05 07:13]

• problem with wireless pavilion 14-V041TX

  Hello

  I just buy Pavilion 14-V041TX and using windows 7 ultimate 64-bit.
  but I have problem with detecting all wify.
  I already install all drivers from the HP site for windows 7 64 bit and always show "no connection are available.

  In the Device Manager-> network-> only 2 drop-down menu card: 1. Broadcom BCM43142 802.11bgn card2 Wi - Fi. Realtek PCIe FE Family Controller.

  Note: no problem with my wify connection, because I can not used with my smartphone.

  Hello

  Please find the link given below might help you solve your problem. In case you have tried these steps made me know.

  http://support.HP.com/us-en/document/c02543015

• Problems with some sites to display after the installation of updates.

  Original title: Display problems

  I have some display problems with certain websites.  The appearance has changed after the last windows update.  For example, in Facebook to backgammon, displays boxes outside and I can't see the full picture in the other boxes or scroll down to see it.  Any ideas?

  Hello

  Thanks for choosing Microsoft Community to post your question!

  According to the description above, it seems that after installing the updates, you are facing some display problems with certain websites. I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. What is the number of KB of the installed update recently?

  2. what browser do you use?

  3. What is the brand and model of your computer?

  While you reply us with the above information, we will update the video card driver and turn on compatibility mode (this applies only when you use Internet Explorer).

  See the following suggestions.
  
  Method 1: Refer to the following link suggestions.
  Some sites Web may not behave as expected in Internet Explorer

  http://support.Microsoft.com/kb/956197/ro

  Method 2: Open Internet Explorer in no mode control the Add - ons.
  a. click the Start button, then select all programs.

  b. click on Accessories, then select System Tools.

  c. click Internet Explorer (No Add-ons).

  If your browser seems to work correctly in Internet Explorer (No Add-ons) mode, you can use the add-on Manager to disable all add-ons and then turn on modules only as needed. This will allow you to figure out which add-on is causing the problem.

  Method 3: You can update the display driver.
  Check out the following link to update the display drivers.
  

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• start of the problem with hp pavilion dv5-1112el

  Good evening guys!

  I had a serious problem with my hp dv5-1112el running in vista.

  One a few days ago I had this problem when I start the laptop it was until after the presentation of the bios, I want to say

  After showing me "Press esc at the start of the menu...". "only after that nothing shoing just black screen!
  Two days ago, I found one when it's making like that if I go to the bios by F10 to press F9 to defult config it ok and today happens to come back but if I mak defult cong bios nothing happen the problem again!

  Please help me!

  Good evening guys!
  Finally, I found the solution for this problem after a few days on this subject!
  I suspect the bios from the beginning and that was the problem, the bios was not good, so I flash
  And the Flash was the problem causes most of the forum and the tutorial I did they are saying to download the update that unzip, rename the file name 3600.bin 3602f21.fd, but it is does not work so I improvise I download the latest version of the bios here
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75233-1&CC=it&DLC=en&LC=en&OS=2093&product=3841120&sw_lang=
  
  I have extracted it I have rename the second file name 3603F21.fd to 3603.bin
  I copy the file in my USB after that connect the USB to the computer
  on the computer by pressing the key win + B and after awhile the computer stop beeping and I restart (astala vist!) everything ok
  
  Thank you

• HP pavilion N011tu Display Driver problem

  Hello

  I bought a HP Pavilion Notebook 15-n011tu. I can't install the display driver for WIndows 8 (64-bit). I tried all 3 drivers on the HP site.

  1.NVIDIA Graphics Driver (2013-10-02, Version9.18.13.1170, 318.33 M)

  2.AMD graphics driver high definition (HD) (2013-08-16, Version12.105.9.0, 204.81 M)

  3.high-definition (HD) Intel Graphics Driver (2013-08-16, Version9.18.10.3224, 136.34 M)

  Kindly help me.

  Hello:

  The only driver you need is an Intel.

  As you have tried without success, see if one directly from Intel works for you.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208%2c%2064-bit * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

• Trying to solve a problem with the list under display properties screensaver!

  When I try to put my screensaver, gout dwon displays a completely blank entry followed by (None) & the list of available screensavers.  Every time I choose (none), it is up to the last installed screen saver.

  An example: the last installed screen saver was ArcSoft Photobook screensaver.
  So, when I select (none) for no screensaver, it is up to the ArcSoft Photobook screensaver.

  This happens each & everytime I have add a new screen saver.
  (None) option always returns to the last screen saver installed.

  There are moments that I need the option screensaver set to (none).

  Any ideas on how to fix this problem would be greatly appreciated.

  Ed

  Not sure as to what I did, however, my problem with the screen saver has been fixed.

  I've been messing around with a number of things that I thought might have caused this problem.  And wala, suddenly the problem existed no more!

• Please help, audio problem with XW6600 and NVS 315

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP 720837-001 replacement part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is resolved, if I reinstall the NVS 290.  For both cards, I use the latest version of the nVidia Driver and driver HP.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  First of all, you want to be sure to load the latest version of the BIOS on this xw6600.  It is from the end of 2012.

  I met this problem several times... do not know if these suggestions will help, but I think that your experience may be related to previous losses audio when the latest drivers are loaded that contain "pilot high-resolution audio" in the game of video driver.

  The current Quadro NVS 315 W7 64 bit graphics drivers Quadro ODE 320.92, which work well in my xw6400, xw6600 and xw8400 workstations running several types of cards Quadro FX and NVS.  If you have used the standard installer downloaded and used the standard "recommended" install that he threw into about 5 pieces, that only one you really need (selected by default single main driver in a custom installation).  That's all I use now, throughout my nVidia installs, and I also check the clean install box on the last page before loading begins in the custom installation path that I go down.   So, to charge fees, I first uninstall anything nVidia via the control panel and then hunt around on drive C for nVidia remains in the trash.  This includes any folder with nVidia in its title, including temporarily enable Show hidden files and folders in the tab views in the Folder Options Control Panel.  I then reboot and finally make this unit "clean install" - checked - technical of custom installation.

  Try this approach first... it's easier.  You might have luck, and audio can return.

  One of the elements that was installed in the "recommended" non-custom installation was a driver of nVidia high-resolution audio.  This seems to conflict with / replace the RealTek driver who was using your audio RealTek chipset on the motherboard.  I discovered that there is a part of BIOS for those workstations which is usually hidden, but sometimes becomes visible with installing drivers high-resolution audio.  F10 in the BIOS, go to the Advanced tab, down for the terminal Options and check if rebalanced Audio appears just above monitor follow-up.  If he was not hidden by the nVidia high-resolution audio driver load then it will virtually always disable status.  Change to activate, F10 to save the change and BIOS don't forget to save changes on exit and F10 again when BIOS asks.

  We got exactly that occur as a result of installing the drivers nVidia GeForce to a GeForce GTX 650 Ti BOOST on a xw8400 and I saw that happen with these latest nVidia Quadro driver packages, too.

  This is the second best method to solve the problem, if it works.

  Another approach is to save your current BIOS settings via replicated in the BIOS Setup, load into my settings to clone xw6600 (attached) and see if the sound comes back like that.  Sometimes integrated Audio remains hidden when we F10 in the BIOS, but my clone settings was set correctly even though the option remains hidden.  You can open the attached CPQSETUP. TXT file with Notepad and Find allows you to do a search for "audio"... the second shot will be the Audio integrated, one.  Note that it is configured to allow this clone... He usually lies in a status of disable, otherwise.

  You can edit it with Notepad, except that, and charge that the version of your original settings of the BIOS using replicated Configuration changed if you want to use this technique with other types of work, such as the xw8600 workstations.  You will always find this entry via this method, even though it is hidden when you look directly into the BIOS, so it's a good thing to know.

  It is the third most easy.

  Fourth... you start dinking autour with drivers in Device Manager.

  Replicated configuration function of the BIOS with a USB, it is very easy to save your original BIOS settings, try another set of settings and return to your original if you wish.  The clone CPQSETUP. TXT file can be edited by hand (with caution) to convert a Disable to activate, for example, saved and then downloaded into your BIOS firmware.  If you want to try attached BIOS xw6600 clone settings make sure to change off the coast of the "xw66002" so that only CPQSETUP. TXT is on your USB... Replicated configuration works which with a file named exactly that.

  I posted here a few days on exactly the configuration of the workstation this clone has been optimized dethrone archive on it.

  Finally, please post back with your findings because it has become a more common problem, and the more data we have here: it is likely, we will find the fastest solution boilerplate.

• ExpertDay query-overheating problem with my Pavilion DV6

  

  Mr President

  First of all, thank you for holding this meeting online.

  The laptop in question is only a Pavilion DV6 6121tx with product # QB367PA bought the India

  The problem is that the Palm becomes too hot after 10-15 min of use. Please note that it is not a problem with the fan/radiator because they are new and the thermal paste is also cool. CPU and GPU temperatures are quite fine and are cool.

  My doubt is what we call the PCH, which becomes too hot. JFYI, the PCH is located just below the palmrest area that becomes hot...

  Please take a look at the snapshot

  My apologies for the bad image. That's why I removed it.

  I agree with chipset problem. I think indeed that this chip is the 'problem '.

  Also, be aware that your laptop is not designed to play games.

  OK I agree that this laptop run most of the games but it will warm up as a side effect.

  However,.

  I searched for information on the PCB and the maximum temperature is...

  The PCH may not work above
  + 108 ° C.

  (Page 239)

  This is the reason why it took so long

  You can find it here. Be warned!

  This document has 900 + pages

  http://www.Intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-HM65.html

  http://www.Intel.com/content/dam/www/public/us/en/documents/datasheets/6-chipset-C200-chipset-datasheet.PDF

  I think it is a mistake to small design. but it's not going to kill your laptop.

  If your continuous pch to 100 for a long time, then you can leave the rest of the laptop for a while.

  Drunks.

• Problem with laptop Pavilion dv6 wireless connection

  I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

  The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

  Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

  The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

  I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

  Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

  I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

  Any suggestion would be appreciated

  I had a very similar problem with Tablet Dell Latitude slate ST of my son.

  He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

  I saw on the Dell forums, a lot of people complain about this card.

  I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

  So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

  I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

  The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

  If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

  Kind regards

  Paul

• Problems with the resolution of display on Android

  We have a problem with the display on our Google Nexus 7 (2013) resolution and our Multi-Folio App. If we keep an article within our published application Multi-Folio, the article does not use the mode full screen of the tablet. But when I look at the article inside the content viewer, use the full screen of the tablet. For your information: we use the 1280 x 800 resolution and the Tablet has the highest resolution of 1920 x 1200.

  
  

  However, IOS, it works without problem. We use iPad 4 (2048 x 1536) with article 1024 x 720 resolution. Do you have an idea of what we can do? In this post, you will find two screenshots that describe the problem.

  
  

  

  

  For some reason, the content isn't be transposed into the application of multi-folio like that in the v28 content viewer. Have you tried updating your application multi-folio on v28?

• HELP - color problem with LR3.5

  Hello

  Sorry for my bad English,

  I have Lightroom for a few days, and I discovered that the image file displayed in Lightroom has a yellow color rendering.

  Only a screenshot I did yesterday.

  

  The displayed original file on the same screen on the windows file preview is OK as you can see below.

  

  This file has been generated, it is not an image, it goes from black to white with gray 20 level.

  I reinstall LR, I check the preset when loading the file, I have reset the preset in the part of development, it's always be displayed with this warm tone.

  Does anyone have any idea?

  I thank you very much in advance,

  Vincent

  Vincent,

  This looks like a problem with the monitor profile. To check as the root cause, you can assign a sRGB profile to your monitor and see if the color cast disappears.

  In Windows XP, follow these steps:

  • Click somewhere on your desktop, select "Properties".
  • Select the "Settings" tab and click "Advanced."
  • Select the tab "color management".
  • Click 'Add '.
  • Select the "sRGB Color Space Profile.icm" file in the file list, which should show the directory 'C:\Windows\system32\spool\drivers\color '.
  • Press OK as many times as necessary to close the display properties

  This assigns the sRGB profile to your monitor, and you can check if the color cast is gone. This isn't a permanent solution, however, you will need to calibrate your monitor using a hardware calibration device.

  Beat

• Help please problem with export

  I had some problems with safari on my imac (OS X), so I did "repairs" I finally remove some keychains and I think that's what's causing the problem I have. However I don't know how to fix it.

  When I try to export my rugged external hard drive from Lacie desktop RAW images to jpg I get this error...

  "An internal error has occurred:?: 0: attempt to index field 'rootFile' (a nil value)".

  I have a deadline soon (in an hour) and need help please.

  Hi Neo,

  I try to export the Cie and go to the Office first... we will know how you go, I'll be around an hour or two!

• Help! problems with photoshop CS4 brushes

  Please help me!
  I have a problem with the PSD, because whenever I want to use the Brush tool, I don't see the entire circle, which usually appear in other versions.
  It is customary to set up, but only to see a piece of the circle.
  [url =http://img23.imageshack.us/my.php?image=fotoshop.jpg] [img = http://img23.imageshack.us/img23 /2875/fotoshop.th.jpg][/url]
  P.D. someone knows how it can be configured to use the OpenGL and other tools and off the pixelgrid tool?

  Thanks for the help!

  Make sure that you have installed the Photoshop CS4 11.0.1 patch and you have the latest video card drivers as this should solve your brush (unless of course you hit shift caps lock by accident)

  To temporarily turn off the pixel grid, you can use Ctrl + H. If you want to turn it off permanently, deselect view-> see the-> pixel grid

• problems with hp pavilion dv3510nr

  I bought 2 of these books in January because my wife was going to Iraq for 6 months and we wanted to use the video to talk to eachother. At first his cell phone worked perfectly and then all of a sudden she has problems starting. She informed me that as soon as she turns on the laptop that she hears a loud "thud" and gets a black screen and nothing happens at all except the keyboard lights work. Sometimes, she waited until 5 minutes, but still nothing. To operate sometimes she removed the battery and operate on sector only and it sometimes lights up with a blue screen with no text or drawing: just blue screen empty, then Windows starts. Other times she had to run on battery only and the same situation occurs. Anyone encountered this before? I guess that this thing must be returned in guarantee.

  Thanks in advance.

  It is a problem with the BIOS of the laptop.  The best solution is to send to HP as the laptop is under a 2-year warranty and you have thwe guaranteed - the laptop was recently published.   Good luck.