Whenever I try to print the convenience store said "a print job in the print queue prevents the other printing of print."

Similar Questions

• Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

  Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

  Hello monorayfromportland,

  If you are unable to connect to the iTunes Store on your Apple TV, take a look at the troubleshooting steps below:

  If you cannot connect to the iTunes Store
  
  

  If you cannot connect to the iTunes Store on your Apple TV (4th generation):

  1. Make sure that your date and time are correct. Go to settings > general > Date and time.
  2. Check if your Apple TV software is up-to-date. To check the updates, select settings > system > software updates > software update.
  3. Make sure you have an active network connection. Go to settings > network.
  4. Check to see if other devices, such as computers or tablets, can connect to Wi - Fi and access to the Internet.
  5. Reset the wireless router by turning and then again.

  Take care.

• Whenever I try to print I get a window 'Print to file' and cannot print the label.

  I print labels on the site of the courier to the United States.  Now whenever I try to print one I get a window 'Print to file' and cannot print the label. So, how can I undo this command?

  Check your default printer, start-> settings-> printer and faxes-> right click on your printer and click "Set as default". I hope this helps.

• HP Officejet Pro L7590, Windows XP Professional, whenever I try to print the fax box comes

  My all-in-one has a problem. Whenever I try to print, the fax box up to the place.

  Doctor could not solve the problem, so I deleted and reloaded the printer program and its working fine now.

  Thanks for your reply.  Myra

• Xerox printer Phaser 8560, whenever I try to print it want to save paper and it never printed.

  Whenever I try to print a document it wanst to save the document in a file and it never printed.

  Hello

   
   
  1. what version of operating system that you use in the computer?
  2. you receive an error message?
  3 did you do changes on the computer before the show?
  
  Method 1:
  You can solve this problem with the boot.
  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  
  Method 2:
  You can also check if the printer drivers are updated on the site of the manufacturer provided:
  http://www.support.Xerox.com/support/Phaser-8560/downloads/enus.html?OperatingSystem=Win7
  You can check the link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  You can also check the link provided and check:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Whenever I try to print something from my documents opens and says under xps. file and does not print

  Whenever I try to print something from my documents opens and says under xps. file and does not print. I also tried troubleshoot my computer and it says that my printer is not a driver and whenever he tries to fix it and says that it cannot install a driver. any help would be appreciated

  Looks like you have the default printer configured to be Microsoft XPS Document Writer.  Go to control panel > printers and devices and see which printer is enabled in a green circle.  If this is the XPS Document writer as I suspect, you can right click on your printer and then select "Set as default printer" after you do this, or if you cannot do this, answer with the brand and model of your printer and we are able to help if you have a driver problem.

• Photoshop cc 2014 crashes whenever I try to print on my PC

  Whenever I try to print Photoshop cc 2014 crashes. I've updated my video driver but no change.

  Hi Colin,

  Please try pressing the space key by hitting the print option. This trick will reset the printer driver in Photoshop.

  If still it crashes, update your printer drivers.

  Please let us know if this helps

  Concerning

  Sarika

• Why PS CC drop down whenever I try to print?

  PS file CC crashes whenever I try to print. Done a virus scan on the file, saved in JPEg format and also tried to save to a different location... program crashes and closes whenever I go to the print file.

  To reset your preferences in Photoshop, return to "Factory Defaults" do CTRL + SHIFT + ALT immediately after the launch of Photoshop, be very fast.

  Answer Yes to the box asking to delete configuration of Photoshop files?

• I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?

  I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Whenever I try to start the media player, it was closed due to a problem.

  Original title: windows media player

  Whenever I try to start the media player, it was closed due to a problem.

  Hello

  (a) you receive an error message?

  (b) when was the last time it was working fine?

  (c) you did any hardware changes or software on your machine before this problem?

  (d) what operating system do you use?

  Method 1: I suggest to try the steps in the link below and check if this can help:

  Troubleshooting of Windows Media Player settings (it applies to Windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Try to solve this problem with boot.

  See the following Microsoft KB article:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information is useful.

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• "Unknown error" whenever I try to access the properties of the network connection

  Hi all

  whenever I try to access the properties of a network connection (e.g. via right click on 'Network'-> properties-> right click on a connection-> properties), type of connection according to what is, I get a message "Unknown error" box and I can't move forward.

  As a result, any setting of any network connection is not editable, more. For example, I wanted to force the IP of the local network of "assigned to DHCP" to "static" with an address fixed IP, but I can't.

  Another weird thing is that I even can't delete one of the existing network connections, even if there are a couple that are not in use for a long time...

  It should be noted that, apart from that, the network of connections work.

  What can cause this behavior, and that might be the way to solve the problem?

  I want to upgrade the system to SP3 but I am reluctant to take the plunge with such an "alive"... error
  As you may have already guessed, the system is running XP SP2.

  Thanks in advance,

  Concerning

  Yes, I am facing the same problem too. The error message says "an unexpected error has occurred." This problem started out with me a few weeks back and I was under the assumption that it was due to a virus attack. But even after a thorough cleaning session problem continues to exist.

  The problem - as mentioned above by the Bell, we can neither open the properties of a connection (i.e. Dial-up/LAN/WLAN), or remove or add a new connection. If you try to open the connection properties, all you get is the message "an unexpected error has occurred" and if you try to delete or add a connection - the system does not respond!

  Surely, this link worked for me. I hope it works for you Bell. Check it out.

  http://wdbuc.com/blog/2010/02/03/an-unexpected-error-occurred-when-you-right-click-on-a-network-connection-in-Windows-XP/

• "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  "the site has encounter a problem and cannot display the page" Why am I seeing this whenever I try to access the center of update microsorf?

  Hello
   
  1 do you have service pack 3 installed on the computer?
   
  2. what was the recent change in hardware or software performed on the computer before the question?
   
  Please follow the links below to solve the problem.

  Method 1
   
  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  
  http://support.Microsoft.com/kb/883614
  
  Method 2

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer

  If you have verified that your firewall and antivirus are not causing the problem, try adding the following Web sites for the Microsoft Internet Explorer Trusted sites zone on the computer where you use Windows Update. After you have added the following Web sites to the Microsoft Internet Explorer trusted sites zone, run Windows Update. To run this method, follow these steps:

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  o https://*.microsoft.com

  o https://download.windowsupdate.com

  o https://update.microsoft.com/windowsupdate

  o http://*.update.microsoft.com

  o https://*.update.microsoft.com

  o http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  I hope this helps.

• Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.

  Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.  I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails.  When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder.  I have Windows XP with SP3.  This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files.  Help, please.

  Thank you

  You're still infected:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Answer the following questions on your next post: brand and model of the pc, what is your antivirus?

  Run all the analyses above, complete, such restart required.

• whenever I try to play the keys to Manhattan, I get an error violation: access to 0 x 00431467 (tried to read from 0x00000000), has been abolished

  original title: error: 0 x 00431467 of access violation

  whenever I try to play the keys to Manhattan I get error violation: access to 0 x 00431467 (tried to read from 0x00000000), has been abolished, what it means and how to fix

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.