Whenever I want to choose a component bootstrap, DW said that will create a new css/js file?
According to DW CC 2015 "the component is not compatible with the Bootstrap CSS/JS file. Because it is "less than v3.0" (which is not the case).
Even upon acceptance to create new CSS/JS files, the question comes up on & more. How can I stop this?
Best regards
I have restored the preferences of DW, as suggested in this page:
Unusual behavior in Adobe Dreamweaver? Try restoring preferences.
Now everything seems to work ok.
Thank you all the same Vivek & Nancy
Tags: Dreamweaver
Similar Questions
-
Original title: Backup Document
I created a backup feature of document for each document that I created, including new documents. I don't want no more of this function. How can I remove it?
Hey BradleyCloetingh,
Can you reverse your actions when you first made the changes, just go through the process and change everything to the original?Or you could do a System Restore.Let us know if you are still looking for an answer.Thank you! -
Signature tool: you want to create a new key pair file?
Greetings.
Just installed BlackBerry_JDE_4.2.0.exe and got my 3.CS for key files
Try to apply these
BlackBerry JDE or BlackBerry JDE Component Package Users: 1) Double-click on the attachment. 2) If a dialog box appears that states that a private key cannot be found, complete steps 3 through 6 before you continue. Otherwise, proceed to step 7. 3) Click "Yes" to create a new key pair file. 4) Type a password for your private key of at least 8 characters, and type it again to confirm. This is your private key password, which protects your private key. Please remember this password as you will be prompted for it each time signing is attempted or a signature key is installed. 5) Click "Ok" 6) Move your mouse to generate date for a new private key. 7) In the "Registration PIN" field, type the PIN number that you supplied on the signature key order form. 8) In the Private Key password field, type the password created in step 4. 9) Click "Register". 10) Click "Exit". 11) Repeat this process for the other .csi files.
When I double-click on any of them, I get the following message:
http://img14.Imagevenue.com/img.php?image=76703_Foro01_122_205lo.jpg
When I type YES to accept the creation of the file pair, it does nothing.
Really need help here, don't know what I've missed.
Got this answer from support:
"The error you receive is the result of not having the Java Development Kit (JDK) properly installed. The issue is provided in the following article in the Knowledge Base of the BlackBerry developers.
The key signature window disappears after receiving the guest of private key
http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-signature-key-window-disappears-AF... "That solved the problem!
-
URGENT! Nice day. I want to cancel the tariff for monthly payments that will be automatically withdrawn from the account today. Yesterday set a new annual rate. Asking for your help.
Hi Agataa,
Please refer to cancel your Adobe Creative Cloud membership
Feel free to contact customer service if you have additional questions.
Kind regards
Shelly
-
Hello, I want to make an outline of the text that I created. I started with a blue background. Then, I created a text and changed the color of gold. I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text. I wanted a draft of the text with the picture. Is this possible?
Thank you
Peter
You're welcome, Peter.
-
Original title: update problems, installation, uninstall, even adobe reader...
Whenever trying to update my adobe reader it says that documents is not a valid file name and he continues to do the update and says update failed. I can not uninstall. What is happening and how to fix it?
Hi SMHaney,
1. What is the full error message you get?
You can read the following article and try the steps and check:
You can also check out the following link and check if it helps:
Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
You can also try to create a new user account and check.
Hope this information is useful.
-
Whenever I connect my iPad or iPhone to my iMac, I get this message asking me if I want to update. I fell for it once, but once the update has been completed, and it was restarted, I got the prompt again.
I thought that maybe it was something with my phone until I plugged an iPad (brand new) and got the same thing. Both devices are to 9.2.1. The two calls to update.
Any suggestions?
February 2016 - https://discussions.apple.com/thread/7470196 - device wants to update to iOS 9.2.1 but he already has.
and: https://discussions.apple.com/message/29859259#29859259
-
your program is blocking things I want and paid for how close security you have it's say, falsely, that it contains a virus?
Hi Lee Cress,.
1 are. what program or application you referring?
2. what browser do you use?
3 are you facing this problem with this program or a particular application?
4. don't you make changes to the computer before this problem?
5. What is the exact error message you get?
We can refer to this article and check if that helps.
Functions of security and privacy in Internet Explorer: http://windows.microsoft.com/en-us/windows7/Security-and-privacy-features-in-Internet-Explorer
If you are referring to UAC, then I want you to know that User Account Control (UAC) notifies you before changes are made to your computer that requires an administrator-level permission. The default UAC notifies you when programs try to make changes to your computer, but you can change how often UAC notifies you.
What are user account control settings? : http://windows.microsoft.com/en-in/windows7/what-are-user-account-control-settings
Response with the State of the question and we will be happy to offer you our help.
-
Cannot import IE Favorites. All by selecting "files" on firefox, the menu drop-down offers no selection "import" in the help section
See also:
Make sure that you have chosen to see the content of article 11 of Firefox on Windows, see the selection in the right column.
-
Hello
I have a few virtual machines that have been created and updated in the latest version of Workstation. When I put them in the merger, the tools are marked as needing an update. If I press 'Update tools', but then I get a message saying "a newer version of VMware tools are already installed.
Number tools version is reported as 8.4.5, build 324285. That merger think they are up-to-date?
Number tools version is reported as 8.4.5, build 324285. That merger think they are up-to-date?
Generation of fusion is 332101, so the construction of tools is more recent (because it's the workstation).
You must uninstall them in the prompt, and then install VMware Tools from the Virtual Machine menu in the merger user interface.
-
my computer slows down whenever I want to play a game. GRIP more memory ram and a new nvidia card.dont not know what else to do. can you help me? game comes on and goes back to the desktop wallpaper.
What games do you play?
the 3200 + is OOOOLLD and you would be difficult to run whatever be done in recent years at all
and you get drivers like that who already have your computer or MB, realtek can be obtained from the realtek site
Since you don't list the exact model of each card, we cannot say whether you are running a GF2 MX or what
and uninstall the nvidia cp stuff, then run http://www.guru3d.com/category/driversweeper/ to clear what is not respected
-
Cannot create the new drive and impossible to reduce c drive I want...
My laptop disk management displays the following information...
(1) healthy OEM 14.75 GB partition(2) 200 MB Healthy (System, active, primary partition) (containing the system files)(3) c: in good health (start-up, swap files, dump, primary) (which contains Windows) total 421 GB, free 400 GB (which contains Windows)(4) D: sound logic GB 29 discI want to shrink the C drive in 30 GB and want to do at least 3 drives more. I also have linux in the D drive.so when I want to shrink C drive, then it shows the size of available shrink space in MB 212653 and total size after shrink 219284MB. This means that my C drive will at least 219284MB. but I don't want that.Another problem, when I tried to create a new simple volume the following error comes. You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions. What can I do?The existence of files across the disk will limit the amount by which you can reduce the volume. You can defragment to reduce this, but there will always be property files that will create a limit for you. I had to do a full install in a 70 GB partition for Windows CE - with my first attempt to install, I could not it less than 250 GB even if I tried to partition when installing Win7 had finished.
I think you'll have to decide a complete reinstall to resolve the issues, but that's just my opinion. During installation, choose the option to partition the drive & set it to create a partition that is not less than 70 GB and Windows will install fortunately in this. You can then use the rest for a partition of data user files.
You don't mention your brand of PC, but even once, as Palcouk said, you will have some facility in order to safeguard the partition image factory of the manufacturer of the PC in DVD or USB [Dells certainly have the USB option for this]. Fix this before whatever it is that you will destroy this partition when reinstalling and might also do so just try to move partitions.
-
Hi, I just downloaded trial of adobe lightroom. However, when I try to import my images it does allow me to. It shows the preview where I choose my pictures to import, but once I click on import, it is said that it is impossible to import my files, which are in jpg format.
Hi chelseac46438928,
Please make sure that you have permissions to the folder where you try to import images.
Or you can try to change the location of import of images in Lightroom.
Kind regards
Tanuj
-
Creating a new Bootstrap document does not create required dependent files.
I work on a Mac under OS X Yosemite (10.10.4) and Dreamweaver CC 2015. I followed all the items available on how to implement a new startup as well as verified document for issues known in Dreamweaver and looked through the Dreamweaver forum.
I need some advice regarding the creation of a new Bootstrap document in Dreamweaver CC 2015. I followed using Dreamweaver's article "Working with the Bootstrap Files" (https://helpx.adobe.com/dreamweaver/using/bootstrap.html). I followed the instructions precisely to create a new Bootstrap document without any pre-built model extra. I used the "create a new" option in the Startup dialog box tab new document, does not make use an available pre-built, made a minor change to the width in pixels of the screen of medium size under the Customize menu and click on the create"" button. Dreamweaver then prompted me to save the associated CSS file that I saved as "styles.css" in the "css" folder file root of my newly defined site. Dreamweaver has not created a new CSS file called 'styles.css' in the location I've just specified, has not added any dependent Bootstrap files in the folder root of the site except "bootstrap.css" (added in the "css" folder) and left me confused as to how to get started with this feature. Please let know us if there are additional configuration steps or things to watch during the creation of a new "bootstrap" page/site. It's frustrating because I'm eager to try this new potentially important feature. I thank you in advance for any help, you can give me.
Hi Nancy,.
Thanks for your comments. Everything you said is true, but it does not directly concern the question I had.
It was a conflict more profound by which I had a wrong folder in my hard drive that had the same name as the hard drive itself. This prevents any local dependent files open in Dreamweaver: https://forums.adobe.com/message/5633342#5633342#5633342 I assume that the file was somehow created when I updated my OS before installing the latest version of Dreamweaver.
In addition, this can cause problems when you set up a new boot environment and have prevented the necessary being created dependent files as I said originally. The files are added to your local disk with a status of 'read only' applied to the primary Bootstrap CSS file to prevent replacement.
Thank you for your help and have a great day!
-
Why dreamweaver wants to replace my existing css file when you create a new page
I created a Web site and I can not dreamweaver to accept my existing css file when I create a new page in the same Web site. I click on file, create new page, I select page fluid and in the lower right, click on the link to an existing css file and click ok, but dreamweaver tells me so my css file does not exist and wants to replace my existing css file? What's happening?
Thank you guys for this report we
It's a little surprising that it is the way it is for a while now. Rather than create a fg with the attached css html, DW invites you to create a new css / replace the existing one. Why?
The part confusing here is that the "css Attach leader"offers two options.
1. fix like a normal CSS
2. attach like a css FG
If you check the preference to "Join as fluid grid CSS" (see attachment) you should not see this question.
that is, unless you attach the css like a css FG, DW treats like any other css and waiting for you to bind one another css FG
However, I'm too confused at first until I realized the difference. Hope this helps
And thank you for bringing this to our notice
.. Henin :)
Maybe you are looking for
-
Power connection Satellite A200-27U
I just bought an A200-27U from Amazon, and I am concerned about the AC adapter. Sometimes when you first, try to turn it on, the blue light of DC - IN doesn't come on. You physically disconnect the power cable on the side of the computer, and then re
-
HP 2540p IDT High Definition Audio Codec - SCCM 2007 Silent Install
Guy I have SP50589 not packaged, created a package driver request and uses the install command to install it silently... Setup.exe/s/v/qn When I run the task sequence, a failure is returned due to packaging do not install it. When I run locally the p
-
There was a problem starting APISupport.dll. How can I solve this problem
I get this error message everytime I turn on the laptop. "There was a problem starting APISupport.dll. The computer works fine, so I need this module and if I do not how I get rid of this error message.
-
Can DeviceNet and CanOpen co-exist on the same bus - CAN?
-
exe files open with adobe reader
accidentally, I changed my default thing to adobe reader, how can I activate this return? all my files .exe now opens with adobe reader, System Restore does not (the software adobe reader bed) I can't uninstall adobe reader software, there is no "ope