whenever I want to read the paper of new e-edition, she always goes to a previous edition

Similar Questions

• CP 4525 always want to get the paper from a TRAY

  Hello

  We have a problem with our printer HP CP 4525 DN-

  -The tray in the printing options is "Auto" and "A4" paper size

  -On printing, the printer always stop and ask us to feed paper manually in a status bar!

  -We already have 'A4' tray for two!

  -Any paper size or type we set a plate on the config panel/web printer.

  -We put drivers in option to use the tray two but some programs it self on 'Auto '.

  -The client PC (Win7/64-bit) is printservers and served by the network

  -We have also updated to the latest driver (61.091.12.102)

  -I me remember an old printer HP - there you might assign to Lac 'by default'...

  Very annoying sound to remember to manually change the tray!

  Hi Visard,

  There are a few places that may be associated with the printer asking that you manually load media into Tray 1.  I would like to talk and ask to check these settings.  If they are all correct, then we can dig deep.

  (1) size support check that the printer thinks is loaded in tray 2:

  Press the 'Menu', then use the arrows to select 'Manipulation of the paper' then 'Size 2 tray'. Since you have loaded A4, it should show "A4".   If it shows something else "A4", open the tray and adjust the length and width guides so that they are set to "A4", close the tray and check the menu again.

  Please refer to:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01860406/c01860406.PDF

  Chapter 6, Pages 92-100 discuss media loading.

  If it is set to Custom or another format of paper and no other tray does not match the job, the printer you guest the media be loaded in Tray 1.

  (2) check the manual power setting

  Press the 'Menu', then use the arrows to select "Configure Device", then "print" and then "manual loading.  Make sure it is set to 'Off '.

  Please refer to:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01860406/c01860406.PDF

  Chapter 2, Page 20 describes the manual power setting.

  It is this menu item that causes all work for manual power entry.  If it is set to "Off", you can try putting on 'On', then pack in 'Off' even once.

  (3) check the default value of the pilot printing

  Right click on the printer in "Devices and printers", then left click on 'printer properties '.  On the left, click on the tab "Advanced" and then left-click "to print by default... ».   On the "Printing shortcuts" tab, click on the shortcut or shortcuts that you use and make sure that 'Paper Source' is not set to "proceed manually in Tray 1".  In the tab "Paper/quality" to ensure that the Source of the paper is not set to "proceed manually in Tray 1".

• HP Officejet Pro 8630: 8630 HP cannot read the paper size / select correct tray

  Installed this new printer after you bought specifically for the two plates that I regularly print on letter & legal size paper.  I am disappointed to see that while I have 'legal' or 'letter', defined as the paper type when I sent something to print from word, the printer just draws in the default tray.  I have no option on my mac to select which paper tray to use when I send something to print.  It seems that the only way I can make the selection of the status bar is to go to the printer and change the default setting of the bins.  It is not at all what I thought I was is & am for the first time, disappointed with a product hp =)

  Hi @Kerioke,

  Thank you for joining the Forums of HP Support!

• I want to change the account for new messages

  I have 12 mailaccounts. I want to change the standard account. It seems to me that the first account in the list is the standard account for new mail, I want the second in the list.

  Tools / account settings
  Button down "Actions account."
  as a default value

• I want to modify the PDF with Word then edit the word file we want to edit the text.

  We have PDF files now I want to convert the PDF file to Word file. After you have converted the file that we want to change the Word file. Then please provide to pdf converter features said in word text editable fearture.

  At your request and please do the necessary.

  Thanking you,

  CONCERNING

  Purushottam Reddy.K

  Acrobat has this feature. The PDF is sometimes modified, sometimes not. Also available, ExportPDF web service.

• I have Lightroom and want to install it on my new computer.  No need to transfer my previous files.  How can I do this?

  I lighroom on my old computer, which borrows my daughter, and I need to download to my new computer. I don't need to transfer my previous files, I just want to start fees on my new computer. How can I do this?

  Download, install and activate with your serial number

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Want to read the size of a graphics window

  I would like to use the size of the graphics window to position the legend next to her, but cannot find the right property. "Bounds - width area" seem to include the entire control (blue arrows in the image below) included the legend, while 'Plot - region - size' seems to be that the area of the grid (yellow arrows). What I want to know is the size of the box which includes the plot and labels of axis (red arrows). Anyone knows what are the properties would get me this information?

  

  Way is the simplest steps.

  1 set the visible property of the legend to false.

  2 get the limits

  3. set the caption to the visible and move as you want.

• What is the difference between General LV and LV RT considering that I want to read the output of a sensor of temperature online?

  Hello world

  I am very new in LV and I need to read my temperature sensore outputs online so that necessary system changes each time the temperature changes. If I use genral LV or LV RT?

  Thank you

  Hi elahetal.  The LV vs LV RT decision really depends on what are your needs of the moment.

  RT is not necessarily to be as fast as possible, but rather as consistent as possible.

  If you have a measure which must be taken every 100mS + / 2 ms to practically use RT a generalist OS like Windows will be randomly off the coast and do other things (read a cd, the printer, the disc index, etc.), causing your position to be late.

  A RT environment will allow you to determine precisely at the time where the system should do what.  The compromise is that the RT environment is somewhat limited, because you do not have all the bells and whistles, practitioner OS.

  If your action must be taken every 15 years + / 10 s then you can very well get away with standard LV on a PC.

  In some cases, a combination works well.  For example, RT on FieldPoint or CRIO to manage the time of sensitive issues and LV on a PC to manage the analysis of data and user interface.

  Hope that helps, please specify your needs if you wish.

  Matt

• want to buy the paper version

  I don't want to pay for my adobe products 10 times more.  Is it really true that you can buy is more truly a real copy I have in my hand of adobe products more?  If this is the case I can't believe people really support this.  If I pay for something I really want to admit not only borrow the services of.  So basically I'll pay $720 a year for something that I could buy before for $599?  No one else does not see how ridiculous that is? If I use it for two years I pay double what it's worth.  Wow a very clever way for adobe to make a ton of money out of people.

  You can always buy a version of the Creative Suite 6 serial number

• I want to recreate the image on my laptop but I'm going to lose my microsoft software?

  I want to get my laptop reconfigured sometime soon, but I want to install my microsoft first pack, I can start on some work. But if I do, will I lose my through my laptop microsoft software being released image? and I have to install another new microsoft pack?
  Thanks, I hope you can help.

  Hi Sophie,.

  As long as you have a software license, after creating the image you can reinstall the same on your laptop!

• HARD drive failure. You want to transfer the passwords to new HARD drive. If it is located. I don't remember the last time.

  HARD drive wasn't in my other computer. Put in a new HARD drive and transferred the bookmarks (FFox. (++ 16 on both), but do not remember how to transfer my saved passwords. Some people have helped me with this when I rebuilt this PC (the one that I use to send this info) and I remember most of the way and the method, but not well enough to attempt it without some guidance.
  The other PC is a laptop ASUS G50VT - X 5.

  XP:

  • C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.

  Vista/Windows 7:

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

  Windows: %AppData%\Mozilla\Firefox\Profiles\ < profile >.

  The "Application Data" in XP/Win2K folder and the folder "AppData" in Windows Vista and later versions of Windows 7 + are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  For passwords, you must the signons.sqlite and signons3.txt file.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Can I use the Captivate6 (subscription) new Widget bars and always give control to my learners?

  Hi, I want to create screens that do not have a fixed, I like my students to explore several interactions 'click to reveal' (for example 4 photos (buttons) appear) and user can click on each image to reveal some texts and pictures, then choose when to move to the next screen. I don't want ' show click, show, click, show click on ' IE linear interaction, instead I want to leave my learner decide what order to explore and spend. I know how to set up the click interactions - but how to stop the timeline to move to the next screen?  I want the points to stay on the screen and not to disappear and to avoid that the screen automatically advances to the next.  Currently I set the duration of the slide to be huge for learners to give sufficient time to explore, but is probably not a better method of practice?  Ideally, I would like to take advantage of the new Widget bars for navigation, rather than building buttons for each screen.  Is this feasible? Thank you very much.

  Hello

  Maybe it's not the best answer... it works but that's what I'm doing now.

  I put a button in the upper corner of the page and make it white so its invisible to the user. I put the break on this button to appear after all the items on my slide appeared then it will hold the slide at this point here. I put the action of this button on the success of "no action"just in case where the user did click on it... even if it is tiny and invisible, I suppose that it is still possible for the user to click on it

  Hope this helps

• You want to read binary files in some parts of the 500th row in the 5 000th row.

  I have files of 200 MB of 1000561 lines binary data and 32 columns when I read the file and sequentially conspire full memory of the generated message.

  Now, I want to read the file in pieces as the 500th row 5,000th row with all the columns and it draw in the graph.

  I tried to develop logic using functions file advanced set file position and the binary file reading block, but still not get the sollution.

  Please, help me to solve this problem.

  Thanks in advance...

  Hi ospl,.

  To read a specific part of the binary, I suggest to set the file position where you want to read the data and specify how many blocks you must read binary file for reading binary file.VI

  for example, if you write table 2D binary file, and then mention you data type this 2D chart and make your account (5000-500). Then together, you produce position. If you have 32 DBL data type and column then it is 256 to the second row and 256 * 500 for line 501th. Use this number as input into your position.vi file get.

  I hope you find you way through this.

• read the multiple analog inputs at the same time

  Hi all

  I use USB-6001 and want to develop an application to multiple tasks in C++. I try to read several analog inputs at the same time, but got some errors. To put it simply, I copy one of the sample code to read in analog data in a channel, and then turn it into function. Then I call this function to thread with the names of different poles (for example Dev1/ai0, Dev1/ai1) and I come across this error:

  "The specified source is reserved. The operation can not be specified such complete"code of State-50103

  I have search the forums, this may be because I use the hardware timing in this function, and this material timing cannot be used simultaneously by multiple tasks. I may have to put all the lines, I want to read in a single task (such as Dev1 / ai0:1). This way I can read two lines at the same time. However, when I try this, I encounter another error:

  Status code "buffer is too small to contain the data read" - 200299

  So here is my question, what should I do if I don't want to read the multiple analog inputs at the same time? Is the thing that hard time cannot be used by several true task? If I have to read several lines to a single task, how to set the settings?

  
  

• read the independent values in a channel

  Hello

  I want to read the value of a chanel.

  I guess that every chanel's store as an array with an index and a value.

  I would like to read a value of a chanel with its index number, then do some calculations, and then write to it.

  For example:

  Chanel 1:
  index value
  1           1
  2           1
  3           1
  4           2
  5           1
  6           1

  start index = 0
  value > 1?
  If no control of the following
  If so do something

  Do you have a sample script to read a unique value in a chanel?

  Kind regards

  Frédéric MANUAL

  OK, so it should work

  Dim oChn, K, value
  "Go to the channel you are interested in.
  Set oChn = data. GetChannel ("Time")

  ' loop through all the values
  For K = 1 To oChn.Size
  Value = oChn (K)
  If (value > 1) then
  "do something
  MsgBox ("value WG 1")
  End If
  Next