WHENEVER UPGRADING ANDRIOD WHEN RESTARTS

Similar Questions

• How to fix stuck battery and automatic when restart updated ios 9.3.3

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  Lambung writes:

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  What do you mean battery stuck?

  the basic troubleshooting steps are: reboot, reset, restore from a backup or restore as a new.

• When I try to install firefox again once it is said, the computer must be restarted to complete the uninstall of the previous version, but when restarted and tried again, it says the same thing, what do I do?

  When I try to install firefox again once it is said, the computer must be restarted to complete the uninstall of the previous version, but when restarted and tried again, it says the same thing, what do I do?

  Please try this: copy the files formhistory.sqlite (or formhistory) and places.sqlite (or places) if they exist and remove the entire Mozilla folder in %APPDATA%\protector.exe and also the Firefox folder in Program Files. Please see.

• I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).

  network adapter AutoDetect fails

  Hello:

  I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).
  Using the command ipconfig, I found that these cards are not detected. (Although without wireless/LAN icons do not display the modem connection). Also, if I go into Device Manager, I see network cards. BUT if I select "research material changes", then the other adapters will appear (those of Privacyware) and internet connection is reset and it will work then.  I wonder why windows does not detect this kind of cards automatically when I start it.

  This problem occurs only in my laptop - I installed the project Feederwatch on a laptop another XP and it worked, so Privacyware cannot provide a solution, since seems a very specific problem.

  Thanks for any idea!

  Seems that the solution was:

  1 - Open Device manager and view the hidden devices.
  2. then go into not connectable & play devices and manually delete all the remainers network software & security uninstalled (process antivirus, firewall, monitor).
  3. several reboots were required in order to know if the garbage problem has been removed.

• When is unavalible Vista Express Upgrade become when they did stop the service

  When is unavalible Vista Express Upgrade become when they did stop the service

  Hello

  See the comment in the banner here as "do you want to upgrade your PC?

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/anytime-upgrade

  and here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Anytime-Upgrade-frequently-asked-questions

  Causes and Solutions if Windows Anytime Upgrade does not work
  http://www.brighthub.com/computing/Windows-platform/articles/90426.aspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When restarting my Z3, it cannot locate my Sim Card

  When restarting my Z3, it cannot locate my Sim Card. I need to open the cover, then reinstall the sim card. What's wrong?

  It's good to restart regularly. You can check if the rebooting in safe mode brings the same question?

  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008

• On page 7 Microsoft upgrade (online), when I entered the product key, it also showed not supported & contact support technique microsoft

  Original title: Window 7

  I bought WINDOWS 7 Professional in 2011 & upgraded to the WINDOWS 8 Pro in 2012. For some reason, recently I formatted laptop. I have the product key, but do not have the installation CD.

  On page 7 microsoft upgrade (online), when I entered the product key, it also showed not supported & contact support technique microsoft.

  PL. help me for the installation.

  Try the 8 key for download,

  https://www.Microsoft.com/en-us/software-download/home

• How to disable the autostart (application) when restarting the server managed?

  Hi Ppl,

  How to disable the autostart (application) when restarting the server managed?

  I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

  I don't find in weblogic.

  Thank you

  You can force stop the application before you restart the server.

  -Faisal

  http://www.WebLogic-wonders.com

• I try to download my paid for 13 elements upgrade. When I click on the "Download" button, I get this message: 413 header length too large

  I try to download my paid for 13 elements upgrade. When I click on the "Download" button, I get this message: 413 header length too large.  Help?

  You can download it by using the direct download link, which I predicted.

  Download Photoshop Elements products | 10, 11, 12, 13

  During installation, when prompted enter the serial number and to proceed with the installation.

  If you had purchased the update serial number.

  First, enter the serial number Photoshop elements 13.

  Then it will ask for the previous qualifying version number.

  In the drop-down list, select Photoshop elements 12 and enter the serial number Photoshop elements 12

• I have a licensed version of PhotoShop CS5 and bought a CS6 upgrade.   When I update, it says invalid license id.   What to do next?  How can I contact personal support?

  I have a licensed version of PhotoShop CS5 and bought a CS6 upgrade.   When I update, it says invalid license id.   What to do next?  How can I contact personal support?

  Hi David,

  You must download Photoshop CS6 and enter the serial number for Photoshop CS6 and then you will be prompted to enter the serial number of product qualification.

  Enter the serial number CS5 to install and activate Photoshop CS5 on your machine.

  Please post on the Adobe Forums.

• Enable related files on Dreamweaver CC setting reset when restarting.

  Hello

  I use Dreamweaver CC on OS X Lion mountain and every time I try to activate the associated files the value false and Dreamweaver restarts, the option is checked on once again. I uninstalled and reinstalled DW, I fixed my permissions of the drive, I deleted all preferences and even open an Adobe Dreamweaver CC Prefs file in my ~/Library/Preferences folder and tried to set manually line 236 to:

  view the other docs = FALSE

  and when restarted, in my view, be reset to true.

  It's annoying because I hate this feature because it makes opening a file go slower than necessary. Please any help would be greatly appreciated.

  The technical team has confirmed that it is a bug and it will get fixed / resolved in the next update DW CC. FYI.

• Whenever I open Firefox on my Mac, I tells me to upgrade, but when I press on install simply tracks and without finishing.

  Lately when I open Firefox, a dialog box appears informing me that I had to upgrade. But when I press on install what I get is a process that goes on and on and never ends. I had this happen several times and each time I finished around the top of the box to close and ending the process. It worries me because I fear that at some point, my version of Firefox will be so old that it will stop working. What can I do to make sure that the latest version is installed. I have a Mac Book with OS 10.6.8.

  David

  The details of your system indicates that you run that v14 FF is now v35

  Download Firefox full installation for all systems and languages {web link}

• After upgrading RAM, computer stops and gives error when restarting: "DISK BOOT FAILURE, INSERT SYSTEM DISK".

  Original title : OFFICE XP STOPS (MESSAGE of ERROR)

  I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE.       > WHAT AM I DOING WRONG

  Hello

  You can view these methods:

  Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.

  Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.

  At the recovery console command line, type:

  Chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information, see:

  How to perform disk error checking in Windows XP

  Chkdsk

• Cannot install Vista SP2; 'upgrade' disabled when I try and re - install by KB958044

  Hello

  After three days of struggle with trying to get Vista Ultimate (purhcased at the United States) SP2 update, and several failures of various updates automatically downloaded from Windows Update: I finally found and read

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/09c291bf-3868-4DFA-8004-139ec8018aa1

  MS response has been a link to: http://support.microsoft.com/kb/958044

  But when I try to follow the instructions in KB958044: 'upgrade' is disabled.

  I don't really wish to throw three days work of re - install my programs, tweak the settings, etc.

  Thank you, Bill Woodruff Bill Woodruff

  Hi Bill Woodruff.

  Because the standalone SP2 package failed with the error: '0 x 80070490', you can try to run Checksur (KB947821) to address corruption in the manifest of component maintenance (EC) and try to install SP2 Standalone Package.

  To run Checksur (KB947821) follow the mentioned below as follows:

  (1) download and run the system update by the following article preparation tool: KB947821. Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  (2) put the computer in Cleanboot before installing the stand-alone Package of SP2:

  To perform the cleanboot, refer to:

  Click Start, type msconfig in the search box and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on continue. On the general tab, click Selective startup, Selective Startup.Under, clear the check box load startup items. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all. Click OK.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use: http://support.microsoft.com/kb/939671

  (3) try to install the stand-alone Package for Windows Vista SP2.

  (4) after Installation of SP2, put the computer in Normal mode:

  Click Start and type msconfig in the box start the search. On the general tab, select "NORMAL STARTUP". Click on apply, then OK. When you are prompted, click on restart.

  However if SP2 fails to install again, then you can have make a repair or Installation upgrade Inplace of Vista to install SP2 as mentioned in article KB958044 after uninstalling SP1.

  During the Upgrade Installation process, you will get the options go online to get the latest updates for installation and do not receive updates for installation. If you choose the option to go online to get updates, then it tries to download updates for the installation process, the windows updates required for Installation, including driver updates and it won't include all the latest Service Packs for Windows Vista.

  If you get an error "upgrade is disabled" when you try the Inplace upgrade, it may be due to a version of Windows Vista with Service Pack 1 installed, you can not upgrade by using media that does not Service Pack 1. If you have a drive without SP1 and SP1 is installed on the computer as an update, you need to maybe uninstall SP1 first and then start the Installation of upgrade or you can arrange a full disc with SP1 to make Installation of upgrade by using the product key came with your upgrade disc.

  For more information, please visit the link: http://support.microsoft.com/kb/951247

  If you try to uninstall SP1 to upgrade Installation, you can follow the mentioned below as follows:

  1) click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list programs.
  (2) If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3) click View installed updates. Click service (KB936330) package you want to uninstall, and then click on uninstall.

  For more information, please visit the link: http://support.microsoft.com/kb/948537

  Hope this information is useful.

  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8.1 will not sleep and error when restarting - DRIVING ME INSANE

  Hi guys,.

  Since the upgrade to Windows 8.1, my laptop never sleeps, now I updated the graphics drivers and it seemed to solve the problem but now it's back to not sleep well again and then just restarts my laptop and take 20 seconds or more to start again.

  When I wake my laptop Inspiron 15R SE 7520 after hibernation an error message with the blue screen "" thread_stuck_in_device_driver".

  All the drivers are updated according to Device Manager. I also left the HOMEGROUP.

  I just have no idea how to solve this problem and I just tired to try since the upgrade to windows 8.1! With windows 8, he wakes up from his sleep in 1/2 seconds... now nothing!

   

  Thank you

  Ravi

   

   

  Hi guys... good new

  I just managed to find myself a solution at LAST! : D (to do with 7730 graphic M AMD Radeon driver...

  I did a little digging around the internet and found this link:

  http://en.community.Dell.com/support-forums/laptop/f/3518/t/19477777.aspx

  that seemed to solve my problem!

  I only downloaded this link below and without having to reinstall what she just did everything for me by using site Catalyst Display Driver/software AMD.

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64

  My laptop now sleeps in the 2 to 5 seconds and boots to the top in the second now: D.

  I have Intel Graphics HD 4000 and AMD Radeon HD M 7730 installed on my Dell 7520 15R SE.

   

  It cannot help EVERYONE, but hey it's worth a try.