Where again?

Similar Questions

• Where again and Media Encoder?

  I bought the student/teacher version today.  I am not yet or the Media Encoder in my apps list.  What gives?  I really need these two programs.

  If the products do not arise, they can not supported on your system. All video products require a 64-bit operating system support. That said, there is no separate list of these products. Yet is related to the creation and the media encoder is isntalled with him as well (After Effects, Photoshop or anything...). ERGO, by installing the first you get everything you need.

  Mylenium

• Satellite P20/P25: Boot process stops at an early stage

  Hi forum,

  with my satellite P20-304 (PSP20E - the European version of the P25) when (re-) start, at certain times, the satellite crashes and does not respond. This is the case at a very early stage of the start-up procedure where again there is nothing on the screen.

  When this happens, the screen remains black or sometimes gray, and I have to press the button of power for five seconds to force shutdown.

  Other than that, the Satellite works very well.

  All the patches and updates that I would like to know, as well as the last update of the BIOS (v1.30) have been applied.

  Already thanks for all advice to what could cause this problem.

  David.P

  Hi David

  It's not easy to say why it happens.
  I think that we can only speculate. So I found on the page of the Toshiba driver a new version of the BIOS. It s 2.10. But it seems that this BIOS is usable only on Satellite P20 units that contain "PSP20E" in the model number.

  If you could check your model number and your device contains the number of this piece, you could try updating the BIOS to 2.10. Before updating the PIF, you should check the upgrade procedure. You know, the bad BIOS and the wrong procedure can make some problems on the Board.

  I think you should also be sure that each driver is up-to-date.
  I put t know how you installed the operating system but eventually the corrupted files on the HARD disk might be responsible for the hanging.
  This could be the case if the laptop goes correctly the Toshiba start screen. Otherwise if the Toshiba start screen does not appear so especially a hardware malfunction is a reason for such problems.

• How to remove the default iTunes genres in the most recent version?

  I've just updated to version 12.3.2.35 today and the localizable.strings file is not the same aspect it was.  There used to be just a bunch of channels, where I would like to delete those contained in the / * = Genres = * /, / * = kinds reduced = * / and / * = with Genres = * / categories.  However, the localizable.strings file looks like now as if it was some kind of compiled code or something and I can't seem to find where again to remove the default iTunes genres.  I don't really want to have a bunch of useless genres in my drop-down menus.  Does anyone know how to remove the default types?

  Looks like they changed to a binary file format, perhaps because changes to the file may affect the use of music Apple... which is unfortunate for those of us who do not use Apple music and wants to restrict the list of available types.  It can still be an alternative workaround, but certainly worth of reports via the iTunes of Apple Feedbackpage.

• Best upgrade

  I bought a Canon EOS Rebel XTi camera in a package deal a few years back that came with an EFS 18-55mm and EF 75-300 zoom. It was a good setup for me, but what would be the best thing that I could buy to make it better? Something or a combination of things under a cople of hundred dollars. I am a novice.

  "Hundreds of dollars" will not go very far, I fear.

  1 LENS.

  The first thing I would suggest that you consider, especially for landscape photography, is a lens wide angle... But most cost $500 or more. Among these, the Canon EF-S 10-22mm USM is one of the best... but it's also more than you say you want to spend.

  A new and lower price alternative is the new EF-S 10-18mm IS STM Canon has just announced. I haven't used (few people have) because it is not in stock, any where, again... and can be a little difficult to find a little time. This lens seems to be reasonably compact (67 mm filter uses) and will be sold for about $300. Also, the sun visor sold separately (EW - 73) is not quite yet available, but seems to be priced below $ 30. Not sure that I need IS on a lens with short focal lengths... but, Hey, it never hurts to have! STM focus drive must be good, too. Now, none of us have had the chance to use this lens, but taking the cannon in the word with what they say about this, must be very nice.

  Other things that may be in your budget "hundreds of dollars"...

  2 TRIPOD

  If you do not already have one, I would say a good tripod.  But, be careful. Don't go too cheap, too compact nor too light with this, or you will not find the use or by replacing enough fast. One who seems a very good deal for me is the Adorama Flashpoint F1228 kit for about $220 including delivery. It is a clone of tripod Gitzo 'Series 2' journalist, with a fairly standard carbon fiber, but decent looking ball head with quick release. (I use several real Gitzo, which are excellent, but much more expensive, but I also use a lot of heavier cameras and lenses that you).

  I have also heard good things about Dolica tripods, but have no real experience with them. They offer several models of carbon fiber, which is what I would recommend. There are a few other quite affordable brands, but also some that are much more expensive. Just be careful, check out them in person if possible, and try to avoid too light, fragile, and poorly made.

  Purchased on the right, a tripod can be a single purchase. A carbon fiber tripod is a little more expensive, but it is lighter than the tripod in aluminium of the same capacity. In addition, carbon fiber absorbs vibrations small, where the 'rings' metal and reverberates. In addition, the CF is a little nicer to handle hot and cold weather.

  A tripod is a number of things for you and a lot of landscape photographers wouldn't think of shooting without having a. Of course, a tripod stabilizes your shot and allows you to make longer than computer possible exposures of pocket. Another thing that makes tripod is to force you to slow down and examine more carefully the are you will take. This usually results in much nicer pictures. Someone once said do arrows multiple panoramas and a tripod will help well do, too.

  3 LENS HOODS

  If you don't already have them, download the lens hood for your lenses. I believe that the 18-55mm uses a hood EW - 63C and 75-300 uses a hood AND-60. Just get into the habit of using lens hoods. They protect your lenses from the oblique light and physical shocks. I see people shot without condoms all the time... and that makes no sense at all to me. A lens hood is a simple, fast & easy to use and inexpensive accessory that can only help your images. I rarely shoot without having a.

  4 FILTERS

  And, if you don't already have some, a filter or two can be really useful. First of all, I would recommend a circular polarizer of quality. I think that your 18-55mm lens uses 58 mm filters (double check that) and I would say one to fit this lens first, since it is probably the lens you will use for landscape photography. A C - Pol filter will deepen the blue of the sky and make the white clouds "pop." It also intensifies colors by reflections of the cup of the foliage and other surfaces. You can use this control reflections on water and other surfaces, too. It is one of the more widely useful filters, as well as one of the most impossible to reproduce with digital software. I recommend B + W MRC XS - Pro and Kaesemann. Hoya HD, HD2, HMC a SHMC. and Marumi DHG. Among others. You do not want a C - POL on your lens all that time... he cuts one or two stops of light. But you will find it useful several times, once you learn to use it.

  Another type of filter that is popular is a neutral density or ND. These animals are generally gray, come in variable strength and are used to reduce the one of light reaching the sensor, so speeds that shutter slower and more large openings can be used on purpose. You've probably seen these picturesque shots with water mobile search creamy... If a stream, waterfall or ocean suft. Most of these types of shots require a kind of ND filter, when shooting with a digital camera. This is because most of the digital cameras am below ISO 100 or even 200. Some go to ISO 50. This limits the slow shutter speed can be used when shooting in daylight. If you receive this type of filter, you'll want to probably a few different strong points... they come in one, two, three, 5, 8, 10 and even more stop strengths. There is 'variable' (turn to change resistance, similar to a C - Pol), but these tend to give unequal effects and sometimes cause unwanted color shades. Note: ND filters are also often needed for videography, where the limits of frame rates limit the opening which can be used in available light.

  Another type of filter which is historically very popular among landscape photographers is the Neutral Density or ND Grad degree. These are half clear, half gray in different dosages and are used to balance a too bright sky with a foreground of an image, for example. With this type of filter, do not buy the round, screw type. You must be able to position the line of gradation differently for each image, so need to use the rectangular type of the filter, which fits into a special bracket that mounts to the front of the lens, allowing you to rotate and slide the filter if necessary.

  I have a nice set of graduates ND dating of when I shot with the film, but frankly I hardly use them more. Shooting digital, I can now do a better job with post-processing... techniques combining several exhibitions or multi-processing a single RAW file and then recombine the part "correctly exposed" of each. It's much more accurate, precise and controllable was always possible with filters.

  5. THE SOFTWARE

  But this brings us to another thing... If not already done, learn RAW and post-process your images. Canon delivered provided with your camera software is very good, but you might want to look at an all-in-one package with some features, such as Adobe Elements. If so, get a book or two on this issue, too... to help you get up to speed using it quickly and more easily. RAW image files are like a digital negative, of sorts. That's all what the camera captured at the time of exposure, but almost always need little more work so that it becomes an image can be used (JPEG, TIFF, PNG or other). However, a shot in-camera JPEG throws a lot of data and is much less "adjustable" afterwards... then you must get your exposure settings, white balance, etc. right the first time... There are fewer opportunities to change or correct later.

  6 CALIBRATION

  You can also consider calibration of your computer. There are various devices and software for this purpose, but the general idea is that most computer monitors do not give very loyal and almost all colors are much, much too bright. This makes it difficult to work accurately with your images and can lead you to a blumenthals trying to make prints. The secret is the calibration. This doesn't have to be outrageously expensive... and can pay for itself if you do a lot of prints, saving paper and ink or pulled apart if you send your print.

  7. BOOKS & CLASSES

  In general, the book of $18 "Understanding Exposure" by Brian Peterson may be the best money you ever spend on your photography. I highly recommend, regardless of your level of experience, but especially for novices. Buy it. Read. Investigate it. Learn it. Your photography will be much better and you'll get the most out of your equipment.

  There are other good books that you can watch. Some are specific to your camera in particular, guides that will help you make the most out it. Others are specific to a type of material or technical photography. Look for things that most of you are interested in.

  Or, you could take a few classes or seminars... or get involved in a photography club... or sign up for a visit in pictures or safari. This can be a great way to learn and develop your skills and too. May be as good an investment as the train would be.

  I suggest also that put you in place a plan, future gear updated level or additions to work when the budget allows. For example, maybe you don't shoot macro now, but I would like to try your hand at it in the future. It could be any number of things... Justg begin to search for and develop a list of things you want to try or items you want to improve. It may be a simple upgrade. For example, if yours is the kit lens 18-55mm that was originally supplied with the XTi, ago most recent and IS a version improved the EF-S 18 - 55 EF-S 18-55 IS STM. Update "Stepper Motor" of the latter is faster, quieter and more precise. An upgrade even more high-end and, of course, the most expensive would be the lens EF-S 17 - 55 / 2.8 IS USM.

  Don't know how use you it, but there are also a number of improvements since the 75- 300 mm you have. The most affordable is the EF-S 55-250mm, now also with the STM focus drive. There are also several 70- 300 L IS USM is the most award-winning build and image quality. One of the EF 70-200mm lenses would be very nice upgrades, too... These are real 'horse' lenses that you find in bags for cameras in most of the pro shooters. The IS versions of them are stabilized, which may be important for telephoto lenses. The f4 versions are more compact and lighter weight, which might be nice for travel.

  You do not have the funds to one of them now, but someday you might. And if you have a capital plan that you want to add or upgrade in the future, you can prioritize according to your needs and usage and to start working with the eventual upgrade. No plan is set in stone, either. You can always change, if your needs or modification of the options available.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Yet the research continues

  I thought I read enough forums. I understood that in order to get even (so that I could create a dvd with chapters), I would need to uninstall my first pro (CC) and then would have the possibility to download first pro in its previous version (CS6) which included yet. This was not the case. After uninstalling first pro CC, I have learned that I now only have an option to 'TRY' first pro 2015.3. Yikes!

  The little drop-down menu never showed up. No other option is never not presented. Really, I still need and trust that I could get it. What can I do now?

  Where again, seriously? If it is no longer available will be someone just tell me?

  Desperately need to make a dvd, I.

  See this:

  FAQ: How to download even with creative cloud

  You need not uninstall PR CC.

• Style of model/library/question (s)

  Hi all

  So I try to burn a DVD on Encore CS6

  Everything goes well outside of my layout and model options are not there.

  I installed the two software packages. See the images-

  

  When I load upwards even I get nothing - see picture

  

  What's going on--does anyone know? I looked through previous questions but have found no solution.

  Go to preferences in the still and watch the location still will use to find such things. It's my preferences of Win7.

  

  While you can put the library anywhere you want, I'd rather put where again search by default.

  If this does not help, use Windows explore to look at this place. Y at - it the library folder? Is there something in it?

  Next steps depend on what you find.

• What is this "thing"?

  InDesign CS4 OSX 10.5.8

  I received a correct (CS3) document that contains (as part of an illustration of a computer mouse), an oval 'shape' that ' looks ' of a filled ellipse frame of a radial gradient (see png 01.Intro) attached. The contour/rest of "illustration" consists of classics InDesign lines/ovals/rectangles and are editable.

  I needed to convert the colors of the "illustration" process only pantone color.

  However, the 'rectangle framework' and the oval shape of path it has a fill color and keyline of

  'none '. The fill color is not a gradient from InDesign.

  When the oval path is selected the oval element can be moved into the 'Rectangle framework' but is masked by its contour. I thought it would be a "composite path" but it's not.

  The question is not an image embedded or placed, it does not appear in the 'Links' Panel and is not editable.

  I can copy this oval shape element and paste into Illustrator (where again it is not editable) and takes on the appearance of a placed graphic. It is as long as point with two layers - < non-native Art > < group > and < Clipping Path >.

  A dialog box is displayed when pasting in Illustrator:

  Illustrator PDF: warnings

  The document contains PDF objects which have been reinterpreted:

  A construction of unknown imagery has been detected.

  The original of the document InDesign times prints very well and exports to PDF...

  Any thoughts anyone?

  Steve

  I heard before are not included as links library items. I was wondering if maybe the file original user had generated a library, then the connection has been lost somehow.

  I certainly can't expect anything other than being a blob in the page. Looks like you will need to recreate it.

• What and where do I find Inbox again?

  When I right click on to search for the tag unread. I accidentally clicked on the 'Inbox again"enamel disappeared. Where is he past? and how do I get it back?

  Please explain a little better. Is it the reception-that is to say disapear Inbox folder or the contents of the Inbox?
  Check if your (unread) filter that is?
  If you do not see the folders pane:
  (press F10 or Alt if you don't see the menu bar)
  on the menu bar, choose: display / layout / Folders pane

• I select save files, but when I close the browser and open it again, he was always ask me where to save files.

  I select save files, but when I close the browser and open it again, he was always ask me where to save files. Whenever I closed and re-opened my browser it goes back to ask me where to save files.
  Help, please

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

  If you like Advanced SystemCare software that could restore some files from older versions to protect files against the changes and then check their settings or uninstall this software.

• How can I get my toolbar to show once again, my section Add on says its on, but the space is blank where its supposed to be in the toolbar, its invisible, visible need

  in more detail in my toolbar, the part on the top of my screen, I have a toolbar where I do research, etc, I click on the tap of firefox, and then add the ons and it says that my tool bar is on the top of my screen, the part of the toolbar, there is a space for the invisible toolbar How can I make visible again, I tried to download the toolbar again, downloads, it is always invisible, I hope you know what I mean, please help, thanks

  none that don't give me no help, but thanks anyway, I kept looking around and said the hell with it and restored default firefox, redownloaded toolbars that I wanted and it worked.thanx, tod

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• Hi, I do not know where to turn: the person who takes care of all the stuff of count is out of town, this friend started Firefox and there was a message about an update, I thoght I again just click on install and wait to re start Firefox. But what I remem

  Hi, I do not know where to turn: the person who takes care of all the stuff of count is out of town, this friend started Firefox and there was a message about an update, I thoght I again just click on install and wait to re start Firefox. But what I remember is this another open window and asked me to choose 'something' (an icon or banner or?), I thought I have to click on an element (I guess I should read all clearly). Firefox updated to 3.6.4, but it also inserted some sort of what might be called a banner? But it does cover only partially the half right of my 3 toolbars at the top of the Firefox window. It cannot be used to something else because it's just a mess of colors and unknowns, except for what looks like a 'top' and what I recognize as an icon of Firefox (but only partially visible)! Now, what he does, it's partly hide this part all the toolbars and they are difficult to read and to do to turn this 'thing' impossible to understand, if I keep to? I can't find in any case to remove it or use it? But since the icon of Firefox is about it, I think you need to know what it is and how trash. I'm sorry for this accident caused my my inattention, but I'm not much of a computer person - HELP! Thanks for any help. Judi

  This has happened

  Each time Firefox opened

  Today is Thrsday June 24, 2010

  The only thing I can imagine: it's a character.

  Tools-> Add-ons-> Themes
  Here should be the character (light theme)
  and a button 'delete '.

  Click on it (delete button), and he (Persona, this mixture of colors) should disappear instantly.

  This help you?

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• Foxfire orange tab on the Gil is missing once again. Where can I find to install?

  Foxfire has an orange tab that is normally on the top of my Google Homepage. But missing once again. Where can I install again?

  You mean Firefox, and any questions about Firefox, you should go to http://support.mozilla.org/en-US/home?as=u

  However, in more recent versions of Firefox, the number of bars (toolbars, bars address, etc.) at the top of the screen has been reduced and by default, some features is the orange button of "Firefox".

  You have probably changed things to show the 'menu bar' (it's one that has File, Edit, View, history, Favorites, tools, help).  The Firefox button is intended to replace the Menu bar, so you get one or the other, but not both.  To get the back button (which will make the Menu bar disappears, click View > tools, and then click menu bar to remove the check mark.)