where alsb configuration data stored?

Similar Questions

• Where are the data stored?

  Hello
  I have SD card where I installed Firefox, I moved also this SD profile to be stored. Is there any other information stored on drive C:\ or TEMP basis... When I use firefox / history, Favorites etc.?

  The purpose of my question is:
  I want to move all the FF data will be stored on the external SD card - when the card is out of the laptop contains no unique data left / right shourtcut of firefox (which does not)

  Yes, the portable versions are going to store their entire data in the folder you are installing, so they leave no traces on the pc.

• What is the path to find where PES 9 data are stored on the hard drive?

  I can't find where the hotos are stored on drive "C" on my PC. I went to the program data > Adobe > 9.0 but can't seem to find the data. Where are these data? I use Windows 7 64-bit. Thanks in advance for your help.

  Dick

  Photos are stored on your hard drive, wherever you put them. PES them don't move unless you tell PSE to do. If you open the organizer and then right-click on the picture and select view properties, it should tell you the directory and the name of your photo.

• How to remove navigation data stored by Mozilla Sync?

  I was on my laptop and I was shocked to discover the history of my office, my mobile navigation. A story that was supposed to have been removed. I'm mystified by what could happen. Then I thought about Mozilla's Sync which I just started. That must be it. Mozilla has synchronized the browser quickly, history just before it was removed safely. Now, these data are stored by Mozilla - where? In the cloud, I presume. I don't know what the hell the cloud is, but I know I want to store my browsing history from Mozilla here. So what can we do about it? Historical navigation and other sensitive data poses security and privacy risks. Maybe I did not read all the information and instructions on the timing when I started. BUT Mozilla really need to be more clear about that Sync will be storing these data from the computer of the user. Is it possible to delete the data stored by Mozilla? I know that the user can control which are synchronized data, but Mozilla should have had a more obvious explanation on how this synchronize data will be stored.

  You can change the password of the account to erase all data stored on the synchronization server Sync.

  • https://accounts.Firefox.com/settings

  The new Sync version currently used still uses the synchronization key to encrypt the data locally before you download, but this sync key is generated internally from the password of your account in Firefox, so you no longer need to worry about this.
  This means that sync key changes when you change the password of the Firefox account and you will lose all data stored on the server synchronization that.

  • https://blog.Mozilla.org/services/2014/04/30/Firefox-syncs-new-security-model/

• Minimum installation to analyze with DIADEM data stored on server Citadel 5

  I want to access the data stored on a server of the Citadel 5, with minimal software installed on the computer of the end with Diadem 11.1.

  The goal is to perform the analysis of the data on the data acquired by data acquisition on a centralizedCitadel server in our lab (possibly in read-only mode).

  In several positions, it is suggested to install the Client Web Lookout development/Run-Time Systems 6.2 Windows 2000/XP/Vista.

  However, this installs a set of components (for example SQL engine...), that we would prefer to avoid.

  What is the minimum configuration for a machine that has no installation of LabView?

  Sincerely

  Paolo Pierini

  Sorry for the misunderstanding;

  as noted in the knowledge base How to recover data from a data base of Citadel with DIAdem, you must install the Citadel 5 database Access Pack, which is included in the package of Lookout. In any case, you can also download and install the Citadel 5 database Access Pack separately at this link.

  This pack should be sufficient in order to retrieve the data from the database of the Citadel.

  I could not find the version for Diadem 11.1, but given that the Diadem version 10.0 is the newest published, in my view, should be

  Serena

• Digital data stored as text in Excel

  Dear community LabVIEW,

  Let me ask you a help with the following problem. I have record of control data Table in Excel, using Microsoft Office Generation Toolkit. To do this, I have model - basically in the Excel template file, there are up to 8 tables, and I need to write different data for them. So, I use the code, I have add in attachments - of course, he is slightly reworked for the forum, but in the application, it uses the same parts of code. Data are save to the model, but - numerical values are displayed in Excel as text. And Excel "knows" it's numeric values - and proposes to convert it to digital, as you can see on the screenshot... Formatting cells, where I write data, doesn't help you no - b/c when I implemented cells as 'General' (basically, digital Formate) format, he said, that the numbers are stored as text - format b/c cells is digital, no text.
  And what is more interesting - when I save no Table, but a digital 2D painting in Excle file through the function, I get the same behavior - data digital is stored as text...

  I may, some incorrect settings in Excel. But maybe, it can be solved in progrmatically. Could someone help, please?

  Thanks in advance!

  

  

  The solution was simple, thanks to a guy who helped me - need to replace point by point. Subsequently, everything has been saved successfully.

  

• Windows Boot Configuration data file is missing required information

  Hello

  I am trying to boot up my laptop and the Windows Boot Manager appears saying that Windows could not start.

  File: \boot\bcd

  Status 0xc000000d

  Info: The windows boot configuration data file is missing required information.

  I have a laptop Dell Inspiron notebook, which came with Windows 7 pre-installed so I didn't have an installation disc, nor do I have a CD player.  How can I solve this problem and is it simple?  I tried to turn on my new laptop and pressing F8 but nothing happens and the windows Boot Manager appears again.  Can someone help me please, or I'll have to return someone to solve this problem for me?

  Thank you

  Michael

  For questions of Windows7 you should repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.  It is a Forum of Vista so I wasn't expecting a question of Windows7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Where are offline files stored (to be synchronized)? Can we change the default location?

  Dear
  I use Vista Ultimate.
  Where are offline files stored (to be synchronized)? Can we change the default location?
  concerning
  Maurin

  Hi Maxim P,.

  Sync Center is the place to go to synchronize your computer with network folders, mobile devices and compatible programs. Sync Center can keep automatically your files and folders synchronized in different places.

  Open Sync Center by clicking the Start button, tap all programs, accessories, and then clicking on of Sync Center.

  Sync Center is a feature of Windows that allows you to keep information synchronized between your computer and files stored in folders on network servers. They are called offline files because you can access them even when your computer or the server is not connected to the network.

  You can see the link below for more information about changing the location of the CSC files.

  How to change the location of the CSC folder by configuring the CacheLocation registry value in Windows Vista

  http://support.Microsoft.com/kb/937475

  For more information, see work with network files when you are offline.

  See the links below for more information on synchronization.

  Sync Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

  How to maintain your information is synchronized

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-to-keep-your-information-in-sync

  Sync Center: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-recommended-links

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Presentationdirector - where the regimes are stored?

  Anyone can tell me where the schemetemplates are stored?

  I create templates and I would share these on the network. Is - this posibble?

  I fix it. patterns stored in the registry under HKCU\Software\Lenovo\NPDirect\Data\Common\Presentation Schemes\

  OR

  HKCU\Software\IBM\NPDirect\Data\Common\Presentation Schemes\ (old version)

• Media Center "new configuration data TV could not be downloaded.

  When initially implemented in Vista Media Center worked perfectly, then after about 3 months or so he left the information download guide.  I couldn't find a solution at this time.  Then I udated for Windows 7.  Now, he will even not be passed the original installation of the region.  Comes back with the error "Failed to download" new TV configuration data could not be downloaded. Existing data, if any, will be used as you continue through Setup TV signal.  That would be perfect, but there is no data available. Have you tried a lot a lot of difficulties on this and other sites, nothing seems to work. Really frustrated. Help, please.

  If you have double NAT. I don't know why you're using TWO routers.

  Here's what to try:

  start by writing down all of the current settings in the router DLink for SSID
  name, password for wifi and the admin password security.

  1. unplug the cable modem. Shut down all computers.

  2. unplug the USR8004 and remove it from your network

  3. disconnect the DLink router and then plug this DLink WAN port in the
  cable modem. Plug any computers wired on the on the DLink LAN ports

  4. plug the DLink router and make a DLink router factory reset. I think
  There is a hole reset at the back where the ports are, use a folded paper
  clip.

  5. when the router comes back to the top (you'll know by the lights), turn on a wired
  computer and you connect and configure the wireless, exactly as you had before and
  reset the admin password on what you did.

  6. the router should reboot. When that happens, reconnect the cable modem

  7. with the computer cable that is already in place, check the connectivity

  8. turn the touchsmart and nothing else

  This should solve the double NAT problem.

  Barb Bowman www.digitalmediaphile.com

• HTML5 database: where is her physically stored?

  Hello

  I'm fiddling around with HTML5 database.

  In order to make my faster web service request, I would like to "cache" data in a local database.

  This SQLlite thing seems very nice and I wanted to give it a go.

  I use ripple and it seems to keep these data but then I do not understand where is the database stored physically.

  I want to pre-create a database so that users will not have to wait for the db update first.

  Any idea?

  Thank you

  Roberto.

  Rather than trying to crush the ".db" on the device database file, it is much easier to save the CREATE TABLE and INSERT statements in a local file or incorporate into a JavaScript file and load the first time the application is run. Let me know if you need an example.

  A file of WebSQL .db with your packaging application would be great, but because of the restrictions, local file access, I don't think that this a pinpointing would be possible on the BlackBerry.  However, if you look at the location of the physical database file on the PlayBook, you must install Blackberry Connect. Databases on PlayBook should be included in the folder: / accounts/1000/appdata //data/database/local_0 /.

  See you soon,.

  James

• Development of Playbook (Qt4.8); app configuration data storage

  Hello

  I'm developing an application of PB using Qt4.8. I would like to know where I can store configuration data. The link http://supportforums.blackberry.com/t5/Adobe-AIR-Development/BlackBerry-PlayBook-File-System-Layout/... gives to think that the folder 'data' is mapped in $HOME

  This means that, in my app, I can simply copy config data in ' ~ / appConfig.dat ' (i.e. tilda oblique which is a unix convention to go to the home directory)

  See you soon,.

  Ben

  "You can store configuration data in the app storage directory that can be accesed by using the access/accounts/1000/appdata path / namespace.application data.   You can also use system browser in the IDE to see the application directory structure.   I've included more documentation about this below.   Even if it's for BB10, most of the details also apply to the PlayBook.

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/filesystem/

• Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  Hi my friend has a Samsung ativ 700 t pro (xe700T1C)

  An update came on his computer to upgrade to 8.1 windows and she accepted the update.

  When the computer has been restarted, an come blue screen error message (error Code: 0xc0000034 in Windows 8 - Boot Configuration data file necessary missing information).

  can help you with a solution?

  I have the same tablet, but I'm still on windows 8.

  see you soon

  Hello

  There is a link available now where you can upload an image from 8.1 to win without a key needed to download... You can save an ISO, create a Flash drive or burn a DVD...

  At least I save the ISO and create a flash...

  The only problem I know is you need to do this on a Win 7 machine or higher and the same 32 or 64-bit machine you make it for...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• What is the name of the file where the contacts are stored.

  I need to restore my contacts from a backup. What is the name of the file where the contacts are stored?

  According to the contacts or the premises or in iCloud:

  ~/Library/application support/address book/metadata for local contacts

  ~/Library/application Suport/address book/Sources find the iCloud account and file metadata

  However, if your backup is located in Time Machine, open the contacts application and any asset, enter Time Machine. Go back in time to find contacts. Select them and click on restore.