Where are the images that have already been imported?

Similar Questions

• The superdrive in my iMac (21.5, late 2009) refuses to mount new audio CD. It is very good with cds that have already been imported into iTunes and Ditto DVD. But the new CD is ejected, which means that I can't add anything to my music library on a cd.

  The superdrive in my iMac (21.5, late 2009, running OSX 10.10.3) refuses to mount new audio CD. He sees the cds, which have already been imported into iTunes (12.3.2.35) and same DVD. But new (IE back to the computer) cds are ejected, which means that I can't add anything to my music library on a cd. Any help would be appreciated!

  First try to reset the SMC & LANDAU 2 - 3 times back to back by LANDAU and Intel iMac SMC resets with all devices disconnected.

  If that does not resolve the problem, go to your local office supply store and get a CD/DVD cleaning kit and use it. If this does not work, then the SuperDrive is end of life and should be replaced. Many users with iMacs older everything just get external DVD readers, if you need to do this, I recommend you contact OWC (www.macsales.com) and they can direct you to one that fits your needs.

• Where are the emails that have been put files in? They disappeared into this NEW email thing. How can I get it back?

  My e-mail folders have disappeared since the 'change'. How can I fix this? Top of the entire page is also different with nothing as if it was. Bad news. Do not like. The use of Mozilla Firefox.

  Which site of e-mail do you use? If it is a popular (for example, Yahoo, Hotmail, Outlook.com, Gmail) volunteer could take a look and see how to change the page layout. If it is dark, you might need support on the site.

• How to insert data into the database of the fields that have already been assigned values?

  Hi all

  I'm sorry for the question, I'm still new to the OPS

  Here's the thing.

  I have 4 points messageTextInput in my page. each of these 4 field is associated with an attribute of the VO.

  3 of these items have their value already defined in the processRequest of the Commander, like this:

         
        OAMessageTextInputBean factureItem = (OAMessageTextInputBean)webBean.findChildRecursive("factureItem");
        factureItem.setValue(pageContext,pnumfacture);
  
         OAMessageTextInputBean actionItem = (OAMessageTextInputBean)webBean.findChildRecursive("actionItem");
         actionItem.setValue(pageContext,pidaction);
         
        Date sysDate = new Date(); 
         OAMessageDateFieldBean dateSystemItem = (OAMessageDateFieldBean)webBean.findChildRecursive("dateSystemItem"); 
           dateSystemItem.setValue(pageContext,sysDate);       
  

  The user must enter the value of the 4th field.

  I used the classic entry code for data as follows:

  in the AM, I added,

      public void insertRecord(){
      
      OAViewObject vo = getTraceVO1();
      OADBTransaction trans = getOADBTransaction();
      
          if (!vo.isPreparedForExecution()) 
            { 
                  vo.executeQuery(); 
            }
      
      TraceVORowImpl v_row;
      v_row = (TraceVORowImpl)vo.createRow();
      vo.insertRow(v_row);
     v_row.setNewRowState(v_row.STATUS_INITIALIZED);
    }
  public void apply()
     {
        getTransaction().commit();
      }
  

  In the processRequest of the Commander, I added:

        if (!pageContext.isFormSubmission())
          {        
           am.invokeMethod("insertRecord",null);       
          } 
  

  in the processFormRequest of the CO, I added:

        if(pageContext.getParameter("submitButtonItem")!=null){
                       
              am.invokeMethod("apply");
        throw new OAException("Trace Created successfuly",OAException.CONFIRMATION);
        }
  

  When I run my page, I get the error message saying that myVO not records, the records were removed or the view instance has been initialized incorrectly.

  Can someone please tell me what this means?

  Kind regards

  Afaf

  Afaf,.

  Please try to use the code below and see what happens:

  Replace the insertRecord in the AM method with this.

  Import oracle.jbo.domain.Number;

  public void insertRecord(String pnumfacture, String pidaction){ 
  
    System.out.println("been  in insert method");
    OAViewObject traceVO = getTraceVO1();
    OADBTransaction trans = getOADBTransaction(); 
  
    /*if (!traceVO.isPreparedForExecution())
    {
    traceVO.executeQuery();
    }
    */
    traceVO.setWhereClause(null);
    traceVO.setWhereClauseParams(null);
    traceVO.setWhereClause("1=2");
    traceVO.executeQuery();
  
    Number pidAction;
    try{
    pidAction = new Number(pidaction);
    }catch(Exception e) {}
  
    TraceVORowImpl traceVORow;
    traceVORow = (TraceVORowImpl)traceVO.createRow();
    traceVORow.setIdFacture(pnumfacture);
    traceVORow.setIdAction(pidAction);
    traceVORow.DateSysteme(this.getOADBTransaction().getCurrentDBDate());
    traceVO.insertRow(traceVORow);
    //traceVORow.setNewRowState(traceVORow.STATUS_INITIALIZED); 
  
    System.out.println("been  in insert method");
  } 
  

  Replace the processRequest of the second Commander by this:

  public void processRequest(OAPageContext pageContext, OAWebBean webBean)
  {
    System.out.println("first time in processForm of CO2");
    String pnumfacture = null;
    String pidaction = null; 
  
    super.processRequest(pageContext, webBean); 
  
    OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean); 
  
    if(pageContext.getParameter("pnumfacture")!=null)
    {
    pnumfacture = pageContext.getParameter("pnumfacture").toString();
    } 
  
    if(pageContext.getParameter("pidaction")!=null)
    {
    pidaction = pageContext.getParameter("pidaction").toString();
    } 
  
      System.out.println("been  in processRequest before assign variables of CO2"); 
  
    System.out.println("pnumfacture :" + pnumfacture);
    System.out.println("pidaction :" + pidaction);
  
  /*assign values to the 3 fields*/
        /*
     Date sysDate = new Date();
        OAMessageTextInputBean factureItem = (OAMessageTextInputBean)webBean.findChildRecursive("factureItem");
        factureItem.setValue(pageContext,pnumfacture); 
  
        System.out.println("been  in processRequest after assign variables of CO2"); 
  
         OAMessageTextInputBean actionItem = (OAMessageTextInputBean)webBean.findChildRecursive("actionItem");
         actionItem.setValue(pageContext,pidaction); 
  
         OAMessageDateFieldBean dateSystemItem = (OAMessageDateFieldBean)webBean.findChildRecursive("dateSystemItem");
         if(dateSystemItem != null)
         {
           dateSystemItem.setValue(pageContext,sysDate);
         }
         */
      Serializable parameters[] = {pnumfacture, pidaction};
      Class paramTypes[] = {String.class, String.class};
  
         am.invokeMethod("insertRecord",parameters, paramTypes);
         System.out.println("been  in processRequest of CO2 after invokeMethod"); 
  
    }
  

  Let us know what happens.

  You can get an error that I have just change this in Textpad and may have syntax errors. If you can't fix those apply here.

  See you soon

  AJ

• How to identify the virtual copies (in my records) that have already been deleted a collection

  Hello!

  I keep looking for an answer to this anywhere on the web and 3 books, but can't find the answer...

  How to identify the virtual copies (in my records) that have already been deleted a collection?

  Here's the workflow, and where I'm stuck.

  1. I chose a picture and put it in a collection.

  2. I did a whole bunch of virtual photos in the collection copies that I tried different modifications.

  3. after and during a lot of changes, I have a lot of virtual copies removed from my collection because I decided against the changes after doing some comparisons.

  4. when I went the folders to select my next picture to work away and so to add to the collection, I discovered that each of my virtual copies was in the original folder, even if I had deleted from my collection.

  5. I really don't want these virtual copies deleted to be in my home folder.  They were virtual copies of trial and error and I wanted them to really just be thrown out.

  6. how to identify these virtual copies removed-from-the-collection in my folder?  File names all look the same, and besides, I want to be absolutely certain that I have selected the right ones.  Some of the changes were very minor and would be difficult to see without laboriously go through them one by one.

  Thank you very much!!

  Anne

  No easy answer on fixing the mess other than an individual inspection of the virtual copy can't watching the Images/Edit history to determine which ones that you no longer need.

  But to help prevent the problem in the future: when you are working from a collection, you must use ALT + return back to remove a copy of Photo or virtual catalog. With just the key DELETE or BACKSPACE only deletes the photo from the collection.

• Lightroom CC Trying ├a import 'New' Photos and they are greyed out and say that they have already been imported, how to make their importation?

  Upgraded to Lightroom CC a few months ago and have had major problems with importation, never had any problems before. Since the upgrade I import a map is fine, next card says pictures have already been imported and that they are grayed out. I know for a fact that I matter not yet. So frustrating! Someone please help! I even turned off the 'don't do not import suspected duplicates' box and again, it will not let add me or COPY. I will attach a screenshot.

  Yes, I went straight from my card. I always did it that way. Not until the upgrade did I start having issues. I ended up having to download hard disk, rename and then import it. Quite unfortunate that they changed this in the upgrade, it was nice not having to move in all directions and could go straight to LR. Thank you very much for the help!

• Photos imported, but do not arise in the new folder.  Cannot re-import, as LR said that they have already been imported.

  LR6, Win10.  The photos that have been imported do not show upward in the destination folder.  Folder had been created within LR.  Deleted the folder in LR and re-created. Tried to import again, but can not, as LR said that they have already been imported.  Now the pictures do not exist on my PC, by searching via the Win10 File Explorer.  How to re-import these photos?  I still have them on the external hard drive, I tried to import original.

  Most likely, you accidentally imported the photo to a different folder than the one you wanted.

  Because you see the photo in "Previous import", I think you'd have to reconnect the external hard drive, then move (drag / move, entirely in Lightroom) or photos to the desired folder.

• Shield update repeatedly offers updates that have already been verified as being installed.

  Shield update repeatedly offers updates that have already been verified as being installed. Continues to be paid the shield up-offer the same updates from May 22, 2012 accordingly installed successfully three times. Whenever the computer is on the same shield and even offers update rises. How can this be corrected?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one, with in a few months.

  Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one in a few months.

  You may lose everything.  iMessage, like most e-mail services, don't keep permanently undeliverable messages.  They only keep in the short period send queue (I don't know exactly how much time but some Apple tech sites indicate no more than 10 days to two weeks) until they are purged.  That's pretty standard as otherwise, large volume, messaging services would be sitting on tera-bytes of messages not delivered each month.

  You actually have to change my phone number?  If not, let alone sign and only in iMessage when you have the new phone with this set of numbers upward to the service.

• What I'm trying to do is when I scroll to the bottom of the page are the images that are on the page stay the same look as I scroll

  What I'm trying to do is when I scroll to the bottom of the page are the images that are on the page stay the same look as I scroll

  Use the scrolling application tools and parameters all at 0

• How can I find the images that have a resolution below 1920 * 1200 using search in Windows 8?

  I'm trying to find images in a folder to have a resolution of 1920 * 1080, but can only find how to search specific sizes - what is useful, but not what I need.

  Any help is appreciated.

  No longer think that it is-just try logic.  :-)

  Search for width and height.

  Example - if I had a folder (with subfolders even) I wanted to find all moroccoin who had a lower width to (but not equal to) 1920 (which is what you say, to halfway anyway) then I'm looking for:

  Width:<>

  If I wanted all the images to a width smaller than 1920 and height less than 1080, so I'm looking for:

  Width:<1920><>

  (... which is what said you you wanted.)

  Of course, who does not account turned images where width is now 1080 and the height is now of 1920.  ;-)

  If I wanted that all the images that are less than or equal to a measure...

  Width:<=1920><>

  Etc and so on...

  All of this assumes that images have been properly encoded with metadata, indexed, etc..

  It can also take some time to process...

  Works for Windows XP I think.

  What you might see in a results pane:

  

  This image is Windows 7, because that is maybe I was sitting in front of in time.  Should be very similar/same to search for files (FILE SEARCH is the key it) in point 8.1 of Windows...

  Note that I added the width and height to the columns for easy sorting - heck, that could solve your problem here.  Go to the root directory (all subdirectories has included in this one you can photos on) and research of *. * and with the width and height columns add, once the search results show all the ions of files files - click one of the column headers to sort (say by width) and you will find a list of images in all of the folders located under him you started with a width of all together, etc.

  But - you seemed to want to put the width & height together, then...

  Dimensions:<>

  However, in my tests, it is less reliable than the width and height - as I am less than or equal to 1920 and height, it was whatever he felt like.

  May arise through this:
  http://www.eightforums.com/tutorials/4595-search-Windows-8-a.html

  Examples of search methods:

  http://arstechnica.com/information-technology/2010/03/Mastering-Windows-search-using-advanced-query-syntax/ (former article, always - pages - topical and valuable - in my opinion.  Using Boolean operators and properties mixed with the many things that you can search for makes searching in file Explorer Windows/a very powerful tool.)

  Even if - when it comes to searching for files - I still live a reliable old friend:
  Agent Ransack

  FileLocator Pro is the professional version (the version of cost) of the tool Agent Ransack.  Nice product, well worth the money as it if you do a lot of research files.

  If you do a lot of mass rename files, I found a free software that is VERY easy to use and reliable/flexible for me for years: Advanced Renamer

  Overall - for most people - the built-in Windows search features and even the ability to change of name no longer.  Here's a decent rundown of the AQS (AQS):
  http://msdn.Microsoft.com/en-us/library/aa965711 (v = vs. 85) .aspx

• Filter-stupid question - how to filter on ONLY the images that have changes?

  I'm looking to filter images that have been changed since the import.  The change could be in lightroom, or external.  I have a setup of filter for external files, but I can't find out what filter to use to display files that have been modified within lightroom.

  I hope that my request is logical.  I find I have more changes in Lightroom (3.5) these days and want to filter (without setting of flags/stars/colors /...) on the images that I've already changed.  Is this possible?

  Thank you

  Chris

  You can restrict the results of the smart collection 'A adjustments' to just a single folder.  First, click on the smart collection ' adjustments ', and then Ctrl-click (command-click on Mac) on the folder you want.  The results will be only photos in the folder with settings.

• Can I remove the old update files that have already been applied?

  Good evening! I just a quick may be a dumb question... when I've updated my computer, if I remove the before update... like when a service pack number, as for example I downloaded the number of service pack 2 What do I do with the number of the service pack 1? delete it?

  Depends on the operating system - Windows

  Please note this is only for Windows XP and is not on Vista or Windows 7

  Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.

  These updates can be removed individually or together. To learn more about the update/s go on:
  http://support.Microsoft.com/kb/xxxxxx
  NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."

  Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.

  Don't NOT delete the folder $ $hf_mig

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  For Vista and Windows 7

  The update uninstall method in Windows Vista is quite different from that in Windows XP.

  Uninstaller for each update folder no longer exists in Vista and the uninstall information is stored by the Volume Shadow Copy service.

  After each update, Volume Shadow Copy service backup only the updated files.

  So with Vista, it's a differential backup, rather than a full backup files for uninstall
  in Windows XP.

  This safeguard mechanism is used to save disk space.

  So basically, you are unable to manually delete the uninstall it from the computer.

  TaurArian [MVP] 2005-2011 - Update Services

• Help - How to edit pictures on Lightroom when photos have already been imported / worked, can not edit images on my library!

  Hi guys,.

  If all goes well, a super simple question to someone... Driving me crazy right now! I have a folder on my desk of RAW (image) files, that I imported into LR up and worked. So now when I open LR and access this folder, the images are seen behind a grey colour and cannot be selected and / or worked on. Only way around it so far has been rename images, re-import them to LR and then expand them, which is of course very time consuming. How can I access these images and expand them?

  Thank you much in advance!

  

  Click on the small triangle to the left center of your screen:

  

  It would show other options, including the folders Panel.

• Windows Mail - where are the Images?

  Windows Mail has suddenly / recently ceased to display images in the body of the email, replaced by the place with Red Cross holders.  I am running Vista Home Premium; service pack 2; 64-bit operating system.  Windows Mail I have * no * check box in the Options - Security to block images and other external content in HTML messages. (In other words, all images should download automatically).  There is no 'right click' option to download images when I have an open message. There an InfoBar at the top of the message to download and display the images in the current message.  The images disappeared maybe a week or two ago.  Help please - I've exhausted the obvious options.

  @tirenpace: Thanks - but none of those who apply.  I don't have any problem to see images on Web pages (and in any case, I use FireFox as my browser).  And, as I said in my question, I have already set up Windows Mail to download all images; and there * no. * InfoBar at the top of the message to download and display the images in the current message.

  I stumbled upon a resolution however; which makes no sense, but that worked.  To restore the default settings of IE.  I don't know how it worked, but it did.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/sudden-change-in-Windows-Mail-receiving-format/9d3f7e20-aebd-4E01-8490-410c12bf5deb?page=3