Where did my WLan connection part for Satellite Pro A100

Similar Questions

• Maximum RAM and type for Satellite Pro A100

  Hello.

  I have already looked at my manual, but I can't get a definitive answer.

  I went to one of these computers, analysis of Web sites and it claims I have 2 SLOTS where I can put 1 GB DDR II PC2-4200 each (so 2048 MB of ram)
  (es http://www.crucial.com/store/listparts.aspx?model=Satellite%20Pro%20A100%20Seri) But according to CPU - Z, my laptop contains DDR II PC2-4300 512 MB

  But when I recorded from TOSHIBA Web site and entered the serial number of my cell phone, he told me that I had a Satellite Pro A100-196
  When I searched for Satellite Pro A100-196 on the internet, I came across a website (http://toshiba.icecat.biz/en/p/PSAACE-00E00DG3/Satellite%2520Pro%2520A100-196.htm) that says that 100-196 a module of DDR II (533 mhz) and that it can place additional modules up to 4096 MB (which means I can't that modules of RAM 2 GB each)

  So I would like to know if anyone knows the final RAM MAX (and type), I can place.

  Thank you.

  The Satellite Pro A100-196 appears to bear the 667 Mhz front bus!
  So, you can also use the modules of memory 667 Mhz (533 Mhz is also possible).

  I advise to use SODIMM 200 PIN DDR2 modules; 667 MHz (PC2-5300)

  You can upgrade the memory to 4 GB max. So it is certainly possible to use a 2 GB into a slot!

  Good bye

• Where to find bars of memory 2 GB for Satellite Pro A100

  According to the Toshiba site, the A100 has 2 memory slots for up to 2 GB per slot, but I can only find 1 GB max cards. Anyone know where I can find 2 GB cards?

  With the card, you mean the memory modules?

  You Satellite Pro A100 must be a unit of PSAACE-xxxx series because AFAIK other A100 Pro supports only 2 GB of memory.

  In any case, someone posted a useful link to the site to upgrade memory. I found this:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26257&ft=m&St=3

  I chose the ProA100-828 because I put t know what exactly your unit.
  However, there is a 2 GB module shown.

  By the way: 200 pin DDR2-533 SODIMM modules are compatible!

• Need drivers for Windows XP edition family 64-bit for Satellite Pro A100

  Hello

  Where can I find drivers for Windows XP 64 - bit drivers for my laptop Toshiba Satellite Pro A100 (PSAACE) series? I was looking on
  [this site | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], but there is for the 32-bit version of Windows XP.

  Thank you

  Yes, you are directly on the European driver of Toshiba page you will find only the 32-bit drivers XP and Vista.
  It seems that the Vista 64 bit drivers are not being released especially for this series of laptop.

  But don t give up buddy;
  Several series of laptops are equipped with the same features. SO try a few only Vista 64 bit drivers from other series that supports the same devices.

  In addition, you can search on some external 3 Web sites from third parties for the Vista 64 bit drivers.
  Many manufacturers of chips provides 64-bit Vista drivers own address for specific devices.

  Good bye

• Need Product Code for (Satellite Pro A100-722) AC adapter

  I am looking for the product number for the adapter from the model below so that I can buy the correct replacement AC adapter.
  Satellite Pro A100-722
  Part number: PSAAPE-00D006EN

  Help would be great.

  This adapter must be compatible:
  * PA2521U/E-2ACA * 15V - 6A - 90W

  I put t know where you come, but you can order this feature of the ASP in your country!

  See you soon

• The second monitor connected to the Satellite Pro A100 "disconnect" himself

  Hello

  I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.

  Can someone suggest a solution to this problem?

  Concerning

  I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.

• WXP for Satellite Pro A100-02Y (PSAAPE) ethernet controller driver

  As Gipsyman pointed out quite rightly, I posted this twice, but since the first post, I found the driver for the mass storage device but did not find any drivers listed for for XP pro Ethernet controller, so no solution I ask the question again and please give people a chance to respond this time before closing the thread!
  No one knows how this laptop ethernet card. I'm looking for a driver for him so that it will work with Windows XP Home edition. Those listed on this site offer unique Vista based ones.

  I m wrong, but to my knowledge, the Satellite Pro A100 PSAAPE uses a chipset Intel Ekron-R (82562GZ) LAN.
  In this case you should look for in the Intel page for compatible drivers ;)

• Need drivers for Satellite Pro A100

  Hello, where can I download drivers for my satellite pro A100 laptop computer (psaa3e)?

  I recommend allows you to create specific Tools & Utilities CD this option, you can find in Toshiba help protect & difficulty but the unit must be pre-installed with original recovery media.

  Another way all drivers download page and the stuff of Toshiba designed that you can find at Toshiba. The link is displayed by the previous user.

• To connect to a Satellite Pro A100 to a TV?

  Hello.
  I have a Satellite Pro A100-PSAA3E and I am trying to connect it so that it shows on my tv.
  Ive tried the connection through the S-Video port on my laptop to the TV using a S-Video SCART cable and cell phone or television are picking up anything.
  I tried each input on my TV, even restarted the laptop with TV already on and set to each entry.
  I have also tried using a VGA-video cable and got no further, even after trying everyhint I can think.
  As far as I know I have the latest drivers and have tried everything I can think of.
  Whenever I'm in display-settings-advanced-poster, TV box is completely grayed out and unclickable.

  Can anyone help?

  Hello

  You can find so many comments on this forum, how to connect the laptop to the TV. Most of them is under the MULTIMEDIA section. One of them is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18877

  The principle is the same for all models of laptops. Please check this thread.

• Need best driver of ATI X 1600 for Satellite Pro A100-830

  Hey

  I use my Satellite Pro A100-830 (PSAACE-00W002EN) for the most part to play my games, but unfortunately I can't. It seems that Toshiba doesn't provide good enough graph-drivers because every time I play, for example: half-life 2, I get this error specefied: internal driver error in IDirect3ddevice9::present()

  I tried to reinstall my computer all with CD distribution which followed with my PC, but this work of t is not a long time. I also tried to download than the latest ATI drivers, but they can not be installed, nor OmegaDrivers (Installable but didn t work).
  I use Windows XP and I have all the updates of 'Windows Update'...
  Just when I reinstalled my computer, I downloaded all Windows, then the most recent BIOS updates, and after that, I deleted the ATI driver that was limited to the CD and installed the ATI driver 'later' of Toshibas own homepage.
  (Not only Steam-games doesn t work, almost none of my games...)

  Please help me on these "desperate times." Would be happy if you could write the answer directly to my email address:
  [email protected]

  Hello

  To be honest, you are not alone in this and many laptop users want to have better performance and play the latest games which can be played with the latest and newest materials. If you have a portable way but want to have maximum on graphics performance.

  Sorry but I think you wait a little too long. We are talking not on desktop computers and notebooks. As a player, you understand without doubt that high-performance graphic has a result a lot of heat, and it can be very dangerous for the portable equipment (placed on the square). Using the most recent and better display drivers will require you probably to a graphics card to work under pressure but the result may be overheating or even damage the material.

  Be reasonable and understand that laptops have lower graphics performance and laptop manufacturer has only one priority: to protect the equipment. Because of this there not much updated graphics card drivers.

  I don't really know what games you try to play, but I tested my old M70 (also ATI) graphics card with several games (not later) and it runs good.

  Bye and good luck!

• Need drivers of Windows XP Home for Satellite Pro A100

  Well, the subject pretty much says it all, I need to get drivers for my "Satellite Pro A100 psaape" meaning I'll install windows XP instead of vista. Only problem is that I can't find the drivers. I looked on the Toshiba site but my partnumber (psaape) does not exist, a similar number only. So how to find the right drivers?

  Thank you

  Hello

  I checked the Toshiba download page and you can find the drivers of Windows XP Home for PSAAP and it's your model of laptop.

• Should what type of Module I use for Satellite Pro A100

  Hello

  I have a Satellite Pro A100 (PSAASE-00G004GR) with + 1 GB of SAMSUNG DDR2 - 533 + already installed (+ 1 GB 2Rx8 PC2-4200 s-444-12-e3 +).

  Now I want to upgrade the memory to 2 GB of RAM, adding an additional 1 GB of RAM, the problem is:

  * In the manual, it says that I have to stick to the following numbers of the module in case of upgrade of RAM which is for 1 GB: PA3411U-1M1G

  In some other sections of the manual, it was mentioned I can use PC2-4200 or PC2-5300 on that laptop, not to mention no module number.

  If {color: #ff0000} + _should I stick with this module number (1 GB PA3411U-1M1G) _ + {color} or simply choose any type PC2-4200 or PC2-5300 RAM available in the market?

  Looking for additional help, THANKS ;)

  Hello

  I recognize that the manual irritates statements. The true, it is that you can install any module market PC4200. So, you can also use the original Toshiba modules that are known to work in this machine.

  Feel free to enter any market module, but I suggest you use kingston or corsair modules to ensure performance and full compatibility.

  Greetings

• Where can I get the adapter for Satellite Pro A120

  Hello

  Anyone know where I can get a dc for a Satellite Pro A120 Jack.
  These seem to be quite rare models.

  I have spent hours searching if google and portions of websites, but just can't locate it.

  Anyone?

  Hello

  All compatible Toshiba laptop parts can be ordered from the local ASP.
  The service allowed in your country could order such a part of Toshiba if it would not be in stock.

  But as far as I know the Satellite Pro A120 needs a * PA3092U-1ACA * AC universal adapter that takes in charge 15 V, 4A, 60W.

  Try to search for this part number on the net and I m you can find deals.

  Greetings

• Where to buy drive HARD MK4019GAX for Satellite Pro 6100?

  Hi - I need a new hard drive for my satellite pro 6100, MK4019GAX part number. I have searched online but have drawn a blank. Any help would be appreciated. Thanks, Roy

  All devices, you can order from the Toshiba service partner in your country.
  As far as I know the MK4019GAX is a 40 GB ATA-100 HARD drive.
  You can also use an another 2.5 40 GB HDD.

• Need good driver WLAN for Satellite Pro A100

  Hi all

  I hope someone can help.
  I have a SAT Pro A100-570 (psaa2e). I had to wipe the machine. So I put on Windows Xp.
  At all the missing drivers on the support site, but I can't find the right wireless driver.

  There are 2 on the support site that I downloaded, but did not work.
  Any help would be grateful.

  Thank you

  According to specification for laptop, your laptop has Atheros WLAN card.
  The driver must be available on http://aps2.toshiba-tro.de/wlan/
  As I see there is Atheros driver for Windows XP Home edition. This is the version 7.7.0.233.1

  Download the procedure for extraction of the start end driver. Let the downloaded TC00147200C.exe file extract all driver files to a TEST folder on desktop.
  After extracting the file open this folder and you will find inside the folder called XPDrv. open the and run setup.exe from there.
  You can install the driver with this setup.exe file?