Where executives?

Similar Questions

• I need help with a problem of scrolling on my laptop

  I have a toshiba laptop with windows vista. The problem is with scrolling and it started this morning after getting information from the Washington Post, where executives of information jump every 5 seconds. Before I entered the Post, my computer was scrolling smoothly and quickly. Now, he jumps at a slow pace, even after that I release the square keys.

  I tried to find something in the Control Panel, but there was nothing there for the problem. I then cut the modem, thinking that would help, but nothing.

  Soon I'll be 80 and not computer wise.

  I would give to apreciate any help!

  Happy new year

  John

  Hi again,

  I have a laptop Toshiba Satellite that gives me problems with scrolling since 12/31/11. Bikest T recommended something that fixed the problem for about 1 to 2 hours and he returned. I use a pad and the up/down keys. No mice. If I used either top or key frame/presentation will continue to jump, at a very slow pace for executives from 4 to 7 after the button is released and I can't stop fucking her.

  I tried the driver Dective who said I had an outdated driver. Being a novice in computer science, I tried, without success, to how this problem could be fixed.

  I had this same problem about a year ago and I don't remember how it was corrected.

  At the time, that this problem is back, I was on The Washington Post watch automatic 5 second frame advances and once they stopped, my smooth scrolling stopped and my scrolling problem started. Any help would be appreciated.

  Happy new year!

  John

  Hi sandanZY

  I merged your new thread on this subject in this thread. Please use the address on the bottom of the message in this thread rather than creating new threads on the same topic.

  Thank you.   :)

• First moments of video rendered as just a black screen - first Elements 9

  Hello

  I am putting together a short demo clip, 8 seconds of a particular moment of my project on first Elements 9. The section has two clips that have been taken separately, but are cut in half with the function of the harvest, so that they both play on the screen at once. There is also a position and brightness of one of the clips settings to ensure they match.

  However, I started seeing strange behavior when I try to make the clip and as so far I have not been able to get a usable copy. When rendered as a .wmv, one of the two clips is inexplicably cropped down to about a quarter of the height of the stage, despite being not not in the editor. In addition, when rendered in the form of an MPEG format I would prefer the file in, even if I don't get the first problem I have a question where executives from 20 to 23 first video won't play in an external video player. I also tried good windows media player and VLC. Instead, the section of the video appears as either a black screen, a black screen with a white line on it, or, if the video timeline scroll at the beginning, the last displayed image. The clip of the music that accompanies the video however still plays during this section, and the error is not seen at all in the editor. Oddly enough, if one of the files of rendering is re-imported in first Elements 9 and played in error, 20-or-so executives will play indeed. It seems that the editor of Premiere Elements that can play these frameworks.

  I am quite at a loss here. I doesn't bother me too much not to be able to export as .wmv, as it is not my first choice, but if someone could help me with the rendering of MPEG, I would be very grateful.

  The source files are AVCHD (.mts) files at a resolution of 1440 x 1080. There is only a 'change of clip"to the point where the video become visible again, but that's just where I divided the same clip to make a change of brightness, as I have several times in the video also.

  Thanks for any help,

  Black.

  I found a solution in entering all the clips in the project and dragging about 3 seconds in the timeline, leaving a few seconds of black space that I can cut easily.

• launch of the unix shell form

  I hope that I am not premature with this question - I have done some research and have not yet found the answer. So if it's pretty basic stuff, I apologize.
  
  I had to convert some older applications, Informix to Oracle (10g 2). The old forms of informix where executed via bourne shell scripts, and as you can imagine, were displays pure character inspired. Is it possible to launch the new forms of Oracle from a bourne shell script? I'm afraid you're going to tell me that I have to convert completely over to a web application...
  
  Darren

  Yes. Then you access it only via a URL. Your unix server would take the role of application server (& / DB server).
  Good luck! I hope they are not too complex and are documented...
  Steve

• When you install windows 95, which is the executable that launches the installation process, and where it is located?

  When you install windows 95, which is the executable that launches the installation process, and where it is located?

  The file is setup.exe.  Depending on your version of Windows 95 CD, it could be in the WIN95 folder or in a subfolder of WIN95.

  If you have more Windows 95 questions, great places to get responses are microsoft.public.win95.setup and microsoft.public.win95.general.discussion newsgroups.  It is a Windows XP forum.

• Execute "dbms_stats.gather_table_stats in the start = > run until the peak hours = > pause = > restart from where he was arrested after the rush hour" mode.

  Guys,

  Please let know us if it is possible to run dbms_stats.gather_table_stats in "start = > Execute until off-peak hours = > take a break during peak times = > restart from where he was arrested after the rush hour" mode.

  I partitioned table with mammoth number of records requiring full table statistics collection once all 3 months. Stats gathering is so expensive that it takes almost 2 days to complete.  Our goal is to ensure that no SQL that runs during peak hours (15:00 to 22:00 hours) is affected by the collection of statistics. That's why we would like the stats collection to run above mode.

  Ideas, suggestions would be very appreciated and I will receive with the profound esteem.

  -Bugs

  Like others, I wonder why full stats are required.

  You nightly stats together people with reduced mobility?

  Check dba_tab_modifications for the changes made to the table, your stats every night, whether its stats are needed comes from there so if a partition has no 10% change, why you re - collect his stats for her?  There are a few other things going on behind the scenes, but close enough.  Even if you set additional stats there and kick that off, he'll simply choose the following who did not, risking several work trying to do the same thing

  theres probably 10 different ways to act how you're good with plql but generate your work statistics with something like that, then open multiple windows of sqlplus and divide it into sections while you are in the collection of statistics on several pieces at the same time.    Failure could write some autonomous plsql proc that analyzes a partition that went in there and call that any amount of time passing in the partition in a loop, but you get the idea of gathering statistics on more than one partition at the same time.

  Change the value of table_owner and table_name

  exec DBMS_STATS. FLUSH_DATABASE_MONITORING_INFO;

  Select the command from

  (select (nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0)) * 100)

  / nvl(b.num_rows,1) as change.

  "exec DBMS_STATS. GATHER_TABLE_STATS (' |) '''' || "TABLE_OWNER" | '''' || ',' || '''' || 'TABLE_NAME ' | '''' || ', granularity =>' | '''' || 'PARTITION | ''''||  ', PARTNAME =>' | '''' ||  a.PARTITION_NAME | '''' || ', ESTIMATE_PERCENT => DBMS_STATS. AUTO_SAMPLE_SIZE, METHOD_OPT => ' | '''' || 'FOR ALL COLUMNS SIZE AUTO ' | '''' || ')' as a command

  of dba_tab_modifications a, b dba_tab_partitions

  where a.table_name as "TABLE PARTITIONNEE YOUR BIG".

  and a.table_name = b.table_name

  and a.partition_name = b.partition_name

  and nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0) > 0

  )

  where to change > = 10

• Where is executable ThinApp actually run?

  Hello. I'm looking for clarification on where the executable ThinApp is actually executed. If I package an application and place it on a file share, running from sharing files or my endpoint device (i.e., Virtual Office) when running?

  I know that I can stream the application or have it install locally. What is the impact of these two scenerios to the extent where the executable file is actually performed? My concern is if 100 people access a package on a file share and this is where it is running, there will be an important read of IO happening on this package in the file sharing, and I'll have to factor that in IOPS how I give that file sharing. It is not so much a problem if executions are spend on the desktop.

  Thank you

  When you run a ThinApp executable from a network share, he currently works in the local system memory. If the sandbox is configured to be stored locally, it is created on the local system.

  As far as I know, there is no limit to the users who access the ThinApp from a network share. Everything you need to look at is the bandwidth network.

• What line in where clause is executed first

  Hello world!
  
  I have some sqls that looks like this
  

  select ...
  from table A, table B
  where a.name = b.name
  and a.name in (....)

  Now, which one of it is executed first? where clause or the clause and?
  
  Join the tables is done preferably in where clause?
  
  I use Oracle 10 g.
  
  Please give me some advice.
  
  Thank you.
  
  Nith

  There is no one "and the clause".

  Your where clause contains two conditions:

  a.name = b.name  -- condition 1 
  
  and 
  
  a.name in (....)   -- condition 2
  

  It is immaterial to the result in the order in which they are executed. And it does not matter in what order you write.
  The exact order of execution will be defined by the optimizer. It depends on the table statistics. You can see in your query execution plan.

• Short cut Thunderbird disappeared after an update this morning after a windiw stated that this shortcut is not found. I can't find where is the executable file. It

  This morning Thunderbird updated itself and a window pops up saying shortcut to thunderbird does not exist. After that I can't find where it is so that I can run.

  Thank you very much. Yes, the problem was exactly the same. Thunderbird executable disappeared after an update. I reinstalled it simply by downloading the configuration file. All my configurations and emails and folders, etc were in place. A great feeling to not lose everything. Again, thank you for your kind reply.

• Where scripts can be executed in a PDF form?

  I created some forms in Acrobat Pro XI, but very, very recently went to Acrobat 8.1 Windows DC.  I have a field 'number of quote' who, at the opening of the form to be generated.  This all works fine, but I can't find the script for her!  Not under the Actions field or calculate nor Document JavaScripts.  I'm puzzled.  Where else could be defined?

  Open Control Panel Pages, right click on the first page, select properties and

  and then under the Actions tab, look under the trigger Page Open. My guess is that

  will be there.

• Oracle 10g Clause WHERE properly executed.

  Enterprise Edition Release 10.2.0.4.0 - 64 bit seems to be a bug.
  
  If SQL "first_insert_date = to_date ('2010-09-07', 'YYYY-MM-DD')" paragraph, he must show 7 tuples. "." but it shows me tuples 0 sometimes.
  Please find below the log.
  Where is the site of Oracle bug report?
  
  
  SQL * more: Release 10.2.0.1.0 - Production Wed Sep 8 07:18:48 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > delete from SCENARIO_SUSPICION_AUDIT_MGT where first_insert_date = to_date (' 2010-09-07', ' YYYY-")
  MM - DD') and scenario_seq in (select scenario_seq from the scenario_transaction where scenario_cd = ' MA00)
  011' and not scenario_ins_id1 (select max (scenario_ins_id1) in the scenario_transaction where scena)
  rio_cd = "MA00011" group of ss1));
  
  0 rows deleted.
  
  SQL > select count (*) in the SCENARIO_SUSPICION_AUDIT_MGT where scenario_seq in (select scenario_seq en
  OM scenario_transaction where scenario_cd = 'MA00011' and scenario_ins_id1 not in (select max (scenar
  io_ins_id1) from scenario_transaction where scenario_cd = "MA00011" group of ss1));
  
  COUNT (*)
  ----------
  20
  
  SQL > select first_insert_date, count (first_insert_date) in the SCENARIO_SUSPICION_AUDIT_MGT where scena
  rio_seq in (select scenario_seq from the scenario_transaction where scenario_cd = 'MA00011' and scenario
  insid1 not in (select max (scenario_ins_id1) in the scenario_transaction where scenario_cd = ' MA00011)
  "Group of ss1)) first_insert_date group;
  
  FIRST_INSERT COUNT (FIRST_INSERT_DATE)
  ------------ ------------------------
  AUG 30, 10 1
  JULY 12, 10 1
  JULY 5, 10 1
  AUG 2, 10 1
  MAY 31, 10 1
  AUGUST 16, 10 2
  AUGUST 16, 10 2
  05-SEPT 3.-10
  7-07.-10
  06-SEPT 1.-10
  
  10 selected lines.
  
  SQL > delete from SCENARIO_SUSPICION_AUDIT_MGT where first_insert_date = ' 07 - SEVEN.-10' and scenario_seq
  in (select scenario_seq from the scenario_transaction where scenario_cd = 'MA00011' and scenario_ins_id
  1 not in (select max (scenario_ins_id1) in the scenario_transaction where scenario_cd = "MA00011" group
  by ss1));
  
  0 rows deleted.
  
  SQL > select count (*) in the SCENARIO_SUSPICION_AUDIT_MGT where first_insert_date = to_date ('07-09-2010
  'yyyy-mm-dd') and scenario_seq in (select scenario_seq from the scenario_transaction where scenario_c)
  d = "MA00011" and not in scenario_ins_id1 (select max (scenario_ins_id1) in the wh scenario_transaction
  Scenario_cd = "MA00011" AGE group of ss1));
  
  COUNT (*)
  ----------
  0
  
  SQL > select count (*) in the SCENARIO_SUSPICION_AUDIT_MGT where first_insert_date > to_date ('2010-09-06
  'yyyy-mm-dd') and scenario_seq in (select scenario_seq from the scenario_transaction where scenario_c)
  d = "MA00011" and not in scenario_ins_id1 (select max (scenario_ins_id1) in the wh scenario_transaction
  Scenario_cd = "MA00011" AGE group of ss1));
  
  COUNT (*)
  ----------
  7
  
  SQL > delete from SCENARIO_SUSPICION_AUDIT_MGT where first_insert_date > to_date (' 2010-09-06', ' yyyy-")
  mm - dd') and scenario_seq in (select scenario_seq from the scenario_transaction where scenario_cd = ' MA00)
  011' and not scenario_ins_id1 (select max (scenario_ins_id1) in the scenario_transaction where scena)
  rio_cd = "MA00011" group of ss1));
  
  7 deleted rows.
  
  SQL > commit;
  
  Validation complete.
  
  SQL >

  As first_insert_date is a DATE data type, its data probably contains also the hours, minutes, and seconds.

  Therfore your WHERE clause... .or first_insert_date = to_date ('2010-09-07', 'YYYY-MM-DD') will always return 0 rows.

  It returns the correct number of lines, your WHERE clause must be... where trunc (first_insert_date) = to_date ('2010-09-07', 'YYYY-MM-DD')

• Where is locate the source file that is executed when you start sqlplus?

  Hello
  
  I must add my sqlplus settings when it starts, but I don't know where is located run file during start sql console.
  I try to find on the internet, but without result.
  Also, is there any file that are running sqlplus closing?
  
  Best.

  Well, just before the output of the command remember to run the coil
  But anyway, you can live without coil you close the sqlplus connection, it stops even when queue.

• My company blocks the executable files to run in the Temp folder. How can I install Firefox without that he tries to run from a temporary folder download.exe?

  I found a work around for the problem of not being able to run executable files from the Temp folder.
  I came across the complete installation of Firefox download page. I downloaded the full installer and used WinRar to extract the file downloaded to a folder and then I could launch setup.exe and Firefox installed successfully.

  Please publish the link on the full installer of Firefox on the same page where the installer of heel is published.

  Thank you.

  Hello

  Complete installers can always be downloaded here:

  • https://www.Mozilla.org/en-us/Firefox/all/

  I guess you went to this page:

  • https://www.Mozilla.org/en-us/Firefox/new/

  I notice that the page has changed a bit since the last time I saw him, but you can join the first link I posted by clicking on «Systems & languages»

• Anyone know where the option 'Show duplicates' disappeared? I can't find it in iTunes 12.4 :(

  Just like the topic...

  I have a large music library, but unfortunately contains many duplicates that I move slowly deleting. 12.4 installed and the option has disappeared from the view tab.

  No idea where it is, or has it been removed?

  It has been moved to the file > library menu.

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use display > show duplicate items (pre iTunes 12.4) or file > library > show duplicate items (post 12.4) then click on Same Album to display exact duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• Satellite A500 - do you know where to find KeNotify.exe?

  Hello

  As a result of a viral infection + fix my Toshiba A500 (P 7) I lost KeNotify.exe.

  This executable is part of the Toshiba utilities that manage specific functions by pressing the FN.
  I reinstalled all modules assigns a link with 'Flash Cards', 'Added value Package', etc...
  But I can't find KeNotify.exe.

  Initially, it was installed under C:-Program Files (x 86)------TOSHIBA-utilities-KeNotify.exe
  So it was a 32-bit executable...! ? I'm on Seven 64 bit Premium and all public services are reloaded from the W7-64 Toshiba support library.

  I tried without success in the other modules 32 bits or 64 if this executable was there.
  Do you know where to find KeNotify.exe?

  Thanks in adavnce for assistance.

  AFAIK the KeNotify.exe is a process in the background and its share of utility Toshiba Hardware Setup (HW).