Where is executable ThinApp actually run?

Similar Questions

• The executable value to run on 3 monitor

  I am trying to set up a series of executable to run on a full-screen especially several system monitor.

  I need to be able to tell LabVIEW that monitor to run, even if my development PC has only a single monitor.

  I * have * to be able to make that choice on my single-monitor workstation - I set up a second monitor to get that to work, but extending beyond which defeats the purpose of having a workstation. Similarly, muliple control system should * not * need to installed development system, and I should * not * have to do the actual compilation on the multi-screen system. The boss sees this as something fundamental that any programming language must be able to do it - he said thay my workstation should not four monitors in order for me to tell an executable file to run full screen on a second, third, fourth, twentith, monitor etc.

  Unfortunately, the only way I know in LabVIEW to assign a non-primary monitor to an executable of fullscreen is through 'properties of the vi', and which only allows access to the monitors set up on the [i] current [/ i] PC. It is a major problem; It must be configurable somehow, [i] using only the tools provided by LabVIEW [/ i] (again, the boss speak here).

  my boss is to be very strict about it, because it is rightly worried about losing face. If we cannot do it in LabVIEW, if we cheat it somehow and our clients ask us how we did / competitors show that we could not have done in LabVIEW, and we say "This Visual graphical programming langauge, we could not do this basic thing, so we had to do otherwise. They rightly ask why we use LabVIEW at all, which is not something we want to hear.

  I tried to configure multiple monitors in windows XP, but it doesn't work - I can not change the numbering / order, or if I can, I do not know how and there is no documentation anywhere that provides for any help or suggestion. I am frustrated and annoyed and under some pressure. Help, please.

  Hi Bob,

  You can set the property 'FrontPanelWindow:Monitor' for each VI. Then you should be able to pass a VI to another monitor.

  When you present the settings GUI to the user, it can choose a non-existent monitor. You can only decide which monitor to use as (with software): UserSelect = 3, available = 2-> choose Monitor 2 instead of 3...

• Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  ===================================
  Simply open the photo that you want to use as wallpaper and
  choose... Set as wallpaper... from the menu.

  If you want to physically add the photo in the folder then
  It can be seen in the background list... Add to the
  following folder: C:Window/Web/wallpaper

  FWIW... If there are fewer than 100 pictures in your my
  Folder of photos... you can see in the background list. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• If I'm going to Win 8 pro. I have to use the stupid face desktop phone or can't I actually run as if it were a real computer (like XP or Win7).

  If I'm going to Win 8 pro. I have to use the stupid face desktop phone or can't I actually run as if it were a real computer (like XP or Win7).

  There are many third-party programs that will probably do what you want:

  http://www.AddictiveTips.com/Windows-tips/best-Windows-8-start-screen-modifiers-start-menu-apps/

• The functionality Execute Disable No. run CPU is not enabled for this machine.

  Hi all!

  After my first installation of ESX 4.0.0 build 164009 on a HP Proliant BL680c G5 (2CPUs - 40 GB Mem), I get the usual screen with the HTTP host address and the stuff of Alt - F1 and Alt - F11, but at the bottom, in red, I get the following error:

  TSC: cpu0:0 1246869) Init: 461: the CPU Execute Disable/No run function is not enabled for this machine.

  I think I must change this setting somewhere in the BIOS, but I can find it. This BL was originally installed with W2k3-32-bit, which was pushed from an Altiris console. think the PSP usually "optimize" some parameters depending on the operating system must be installed.

  All ideas

  Hello

  I would also enable the Intel-VT if it is not already in your BIOS. It is always very good check that your BIOS settings are correct for ESX. HP should have a white paper or documentation with the appropriate settings.

  So far enable for Intel HP systems based on my list includes:

  Intel VT

  No execution

  If YOU select an OS type select Windows NOT Linux.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• My company blocks the executable files to run in the Temp folder. How can I install Firefox without that he tries to run from a temporary folder download.exe?

  I found a work around for the problem of not being able to run executable files from the Temp folder.
  I came across the complete installation of Firefox download page. I downloaded the full installer and used WinRar to extract the file downloaded to a folder and then I could launch setup.exe and Firefox installed successfully.

  Please publish the link on the full installer of Firefox on the same page where the installer of heel is published.

  Thank you.

  Hello

  Complete installers can always be downloaded here:

  • https://www.Mozilla.org/en-us/Firefox/all/

  I guess you went to this page:

  • https://www.Mozilla.org/en-us/Firefox/new/

  I notice that the page has changed a bit since the last time I saw him, but you can join the first link I posted by clicking on «Systems & languages»

• What steps should I take to find out what & where a program is constantly running on my computer. I have a Vista laptop comaq

  Seems that my computer is running more slowly than normal. Went to Microsoft Fix & this was the answer I got from them. They will fix it if I pay a fee. I just don't have the money now. Help!

  Thank you... Bette

  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically

  
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What happens if the device of trust I try to log on using two-factor authentication is showing the device in a place is several hundred miles away where the device is actually?  Can I still sign?

  I'm trying to sign in on a MacAir iCloud I used constantly for several years.  I enabled two-factor authentication, and my iPhone (where I get my verification code) shows my Mac Air are hundreds of miles away from its actual location.  Do I always allow to sign or is something else wrong?

  Where is your Macbook Air show its location?

• Using VI Server to check whether another executable LabVIEW is running

  Hello to you all, helpful people.

  I need to have a single executable check LabVIEW if an different LabVIEW executable is running.  The simplest way to do seems to be to ask Windows if the name of the executable runs.  A good thread is here.

  However, this requires the use of a tool (task list) that does not exist on all Windows operating systems I need support (all flavors of XP, Vista and 7).  In addition, even if I found an equivalent for each OS, I need to make sure that they continue to work and update my program whenever a new OS was released.

  A much better solution would seem to be to use Server VI in LabVIEW, so it is cross-platform.  However, despite reading over my printed manuals, by reading lots of subjects in the electronic manual, scanning through the forums and make some limited looking for a manual on the Web site of NOR, I still can't understand the basics of the implementation of a communication server VI between two executables.  It's very frustrating, because I'm sure it's a simple task, but I can't find the right instructions.

  A lot of instructions to configure a server VI say to go to tools-> Options-> VI Server: Configuration and enable the TCP/IP option.  Which seems exaggerated, if I only need communication on a local computer, but ok.  However, in other places told me that this sets the default settings for the instance of the main application (another subject I am still unclear on), so how does it apply to my existing LabVIEW project?  My current project is an executable, and I thought I would create a new build for the second executable specification.  Executable has all my existing code, while B executable would have just a reference VI available server ping, in order for an executable say if it is running.

  So I built executable B, and I joined his VI for your reference.  Deciding that the VI settings programmatically server configuration will be more comprehensible, I put options that seemed logical: a unique TCP Port number listen to Active = True, TCP/IP access list = IP Address of my computer and the executable = B.vi VI access list.

  In my test executable A.i, which I use to this get up and running before changing my main code, I use Open Application references with the IP of my computer, the unique port number and a short timeout.  I hooked up to a property App node to determine if I get the correct connection.  All I really need is to check the name of the Application and I'm good.  However, I keep getting 'LabVIEW.exe.

  If anyone call tell me that I forget in this simple configuration, I would be very grateful.  Some basics on something else I'm missing about how works the server VI, how the tools-> Options from the settings relate to all, etc., would be a big bonus.  Eventually I'll need a way to specify no IP address of the computer (or a way to interrogate LabVIEW), so I can broadcast these two executables on any random PC.

  Thank you in advance for your help!

  -Joe

  P.S. in the preview window that all of my text has run together; I hope sincerely that is not happy when he published, in particular given its length.  If so, I apologize!

  The application ini file should contain the following line:

  Server.TCP.Enabled = True

  Not to mention that this is a better way to see if your inside an executable file:

  

  Tone

• I have 8 GB of RAM, but I am having major problems with my pc. Error message when I could actually run diagnostics said system is excessive paging. Help, please.

  Have also run the Windows memory diagnostic tool, but system says there is no problem. Have tried everything. Startup Repair is also no problems but there obviously, it is because although the Office seems normal when you can actually get for her, he is immediately frozen and I can't access anything whatsoever files, internet, e-mail. Fortunately, also a laptop so I tried to find help!

  Hello

  • What is the brand and model of your computer?

  There are several reasons why you may experience excessive paging.  If you do not have enough RAM to run Vista and all additional progtams, then your computer is using your hard drive as additional or virtual memory. Thus, when the system uses the hard disk as memory, excessive paging that is more.  It is therefore possible, you need to add more RAM to your computer.  If you have less than 2 GB of RAM, you can consider adding more.

  Another reason why this might happen is if your computer is infected with a virus that uses system resources.  So to run a full virus, malware, spyware, trojan, scan your computer to make sure that it's clean.

  Microsoft Security scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  These articles will explain what is virtual memory, how much your computer is currently using and how to change or adjust the amount of virtual memory available on your computer.

  What is virtual memory?
  http://windowshelp.Microsoft.com/Windows/en-us/help/fd3e9104-1076-4600-9F9D-8739849387ec1033.mspx

  Discover how memory is using your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/6e566289-20FA-4ED4-BDDF-0b36a77b003c1033.mspx

  Change the size of virtual memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/89ca317f-649D-40A6-8934-e5707ee5c4b81033.mspx

  Prevention of problems of memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/34955e8d-9e3b-4f68-8e7d-773c167c61e21033.mspx

• Mozilla think I'm under v6 - I am actually running v25. Why?

  Your site think that my version of FF is outdated and I use Windows7.

  I'm not.

  I am running FF on Mac OS 10.6.8 25.0 v

  (Netalyrz also I'm bf6 under Windows.
  Your convenience store also I am bf6 under Windows.)

  "About Firefox" watch v 25.0

  Reset all the '.useragent.' prefs in this support article - https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible - will fix that OS associated pref.

• How can I tell if an executable is already running?

  I am writing a fairly large LabWindows/CVI program and sometimes will be triple - click the desktop icon, from two copies of it. Is it possible to tell if a program is already running, so that the second copy can itself cut?

  Look at the CheckForDuplicateAppInstance () command: the help page also shows a short example of programming.

• VI executable (.exe) without running, running continuously, abandon the execution and the pause button

  Dear all,

  I want to build an application (.exe) from a VI and I want Don t face before show the operation, continuous operation, abandon the run and pause (toolbar buttons VI). The goal is to make a SCADA application without accidental shutdown.

  Maybe the question is too trivial, but I'm new to LabVIEW and I Don t find the way to do it (I unchecked "Show Abort button", VI properties menuo to build the specifications, but nothing happens).

  Thank you very much

  Javier

  Thank you very much.

  The I found the way to do it using "Customize window appearance dialog box.

  File-> properties-> appearance window VI-> customize.

  Thanks again.

  Javio

• How and where can I download and run, lack tasklist.exe?

  Try to find what causes my CPU to have high CPU utilization.

  Someone said, I could check the CPU high usage by going

  to RUN and type cmd, enter, and then type tasklist/SVC.

  but I get an error saying, essentially, that there is no task list.

  So, how can I get Tasklist on my computer?

  Windows XP Home Edition does not include the Tasklist.exe utility, I can't understand why Microsoft excluded this utility of the Home Edition, but you can download a copy here: http://www.computerhope.com/download/winxp.htm put the utility in your Windows\System32 folder.

  You can also use Process Explorer from SysInternals to obtain information on the execution of the process.

  John

• flashing mouse cursor somewhere a little different at the entrance where the screen is actually

  My Sony Vaio has problems with its function of mouse. It emphasises the need to synchronize an interactive whiteboard, when you change the pc input. If you have the time you train where the stylus is and where the writing pen and you can still get and click on tabs and writing etc, it's just like it with my mouse, touch screen or mouse pad reacts by being out by a level of about 120 degrees and a distance on my screen about 1.5 cm. its really annoying, as my typing for facebook messenger box dropped the bottom of the page, I don't see what I am typing until I have return transport a couple of times. Help!

  VAIO E Series 14 bis - SVE14A27CNH laptop computer that you use?

  I almost had a similar problem with my Sony SVE14A27CNH.

  I do not have that there is a problem with the mouse device. After lengthy trials, I reset the calibration of the touch screen of the tablet pc settings in Control Panel and fxd problem.