Where in Windows I am able to see if it is OEM a license or a VLK license?

Similar Questions

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer Windows XP is able to see the Windows 7 computer, but when I try to connect, I get an error saying: access denied.

  original title: Win xp family is unable to connect to Win 7.

  I have a win xp top of tower that connects wireless to a belkin router cheap
  I have a laptop Win 7 pro that is connected to the router.
  The Win 7 machine is NOT configured to House groups.
  We are all on the same workgroup.

  I added the user name of the XP machine the machine to Win 7 pro with admin rights.
  I shared a folder on Windows 7 and added the username and gave read/write rights.

  I don't have a software firewall.

  When I try to connect through Explorer win via the Working Group, I see the Win 7 machine (10 seconds).
  I see the folder 'User' that I can go and I see the folder I shared but I can't access it.  Access denied...

  What happens on Earth!

  I solved this problem to upgrade to Windows 7 Pro.

  Now, if someone could answer just my Q on WHS 2011... What would be fantastic :D

• I'm not able to see the file in the facebook using Windows Phone group.

  I'm not able to see the file in facebook groups. Using Facebook for windows phone v5. Someone please help me

  Hello

  It seems that your problem is specifically related to Facebook.

  I suggest you contact the Support of Facebook for support on this.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 & firefox 4. I love being able to see all my favorites all the time.

  can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 & firefox 4. I love being able to see all my favorites all the time. Edit

  Just hit CTRL + I

• Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.

  Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.
  I didn't not turn off my computer and I did 3 other print screens after that I want to get back because I didn't stick it in Paint by mistake.

  The clipboard objects are not stored in a file. When you send something to the Clipboard, it is stored in a memory location that is only available for the operating system.

  A web search will find 3 third-party programs that will allows to record multiple Clipboard entries. Research on '' programs Clipboard. '' Microsoft® Security MVP, 2004-2009

• If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  If I had to format a hard drive, it will delete everythink including windows xp disk if yes I would be able to see all thinking when I turn on my computer, as if that were to happen I could use windows install for install windows xp

  Gaara_2k6,
  Welcome to the responses of the Forums.  The short answer to your questions are Yes and no and no.

  Depends on how you format the drive, it will delete everything on the drive.  Now, it may still be recoverable with a software specialist or moving to a data recovery company.

  If you formatted your hard drive you would not be able to start to do anything, because there would be nothing on the startup disk.  With the Windows XP CD or with the recovery media provided by the manufacturer of the PC is the only way to reinstall Windows. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• not able to see my files windows Messaging on why and what to do

  Since Monday not able to see files on windows mail you can any one help?

   

  If you do not see the folder list when you open WinMail, then go to view | Layout and activate the list folders or the folder bar to view the folders.  If the folder list is present, but you do see some files, then try to compact and repair the database by using my Windows Mail utility (www.oehelp.com/WMUtil/).

  Steve

• Windows Media Center has suddenly stopped being able to see tuners. Error "could not find the tuner or all tuners are busy."

  Original title: Windows Media Center has suddenly stopped being able to see tuners.

  I am running Windows Media Center and have a 6 Ceton infinitv tuner connected to my network.  Since a few weeks things have worked very well.  Now suddenly after installing a faster wifi adapter, I get messages such as unable to find tuner or all tuners are busy... who don't feel like I can always go to the tuner by Explorer or chrome, by typing the address of it and it arises but also shows that it is set on the channels that I am no longer watching.  Any ideas on why WMC is suddenly acting when the only thing I did was install an a6200 netgear adapter, nothing has changed.

  Hi Eviln,

  Please contact Microsoft Community. I understand that you have a problem with the TV Tuner card, I will surely help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 driver corrupted or obsolete.
  3. wrong settings.

  Try the steps listed here:

  Method 1:
  I suggest you perform a clean boot and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to download and install the latest driver for TV Tuner card on the manufacturer's Web site and check if it helps.

  http://cetoncorp.com/product-support/

  Method 3:
  If the problem persists, you can see the steps in the following article and check if it helps.

  Watch TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

  See the article for more information.

  Get help for your TV tuner
  http://Windows.Microsoft.com/en-in/Windows7/get-help-for-your-TV-tuner

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Not able to see the software Audio Beat and silent witness not lit on cool windows 8

  Hello

  I use a laptop: HP ENVY 4 1046tx. I installed fresh windows 8 on it. After that I downloaded the audio software of HP software: the site, but this driver is not accepting.

  1. I am not able to see the Beat Audio software and Equalizer setting in Control Panel.

  2. when I am pressing mute mute button (red light) was not on the button

  Thank you

  Prabhat

  Try the driver IDT Audio here:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58635.exe

• When I 1st layer trimming video - the upper layers are in the monitor program. I want to be able to see as a layer that I am Reaper. Where are the settings?

  When I 1st layer trimming video - the upper layers are in the monitor program. I want to be able to see as a layer that I am Reaper. Where are the settings?

  

  Disable Composite preview at trim:

  

  MtD

• When I select edit then preference, the window is too large to be able to see the record button at the bottom to save my changes in the preferences.  How do I make the window smaller so I can't save my changes?

  When I select edit then preference, the window is too large to be able to see the record button at the bottom to save my changes in the preferences.  How do I make the window smaller so I can't save my changes?

  Your system meets the requirements of System. Dreamweaver?

  The problem can also be caused by the settings of your system as in

  

• Windows 7 network can't see multiple devices on the network

  Hi all.  I'm about to leave my hair on this issue - I hope someone can prevent the horror that would be me without hair.

  I am running Windows 7 Home Edition on a personal computer that is connected via cable to a router UVerse also providing my home with wireless services.

  A few months ago, I could see - of my PC, network and devices and printers - the two PS3, XBox systems and Samsung TV devices that are connected to my wireless network.  Apparently randomly, my computer has ceased to be able to see these devices.  After trying everything I could think of, I've finally reformatted the system (before Christmas) and everything was good again until last week when my computer stopped once more to see these devices.  I * really * don't want to reformat my system again...

  Here are some details on where I started after the last reformat:

  The PC is connected to a homegroup.

  The PC has a wired connection to the router.  The devices are connected over wireless.

  The firewall is turned on.

  AVG anti-virus has been activated.

  Network discovery, file and sharing printers and streaming media are all enabled.

  Password sharing is disabled.

  Devices could stream Netflix/Hulu as well as files on my computer (using the PlayOn Server - I've never used WMP).

  Now my devices can still Streaming Netflix/Hulu, but not the files on my computer.  The PC can't see the devices and the devices cannot see the PC.

  Here is a list of most of the things I've tried to solve (although I've done so many things, I probably don't forget some):

  I added the PC to the wireless network, so now that it is connected both cables and wireless.  I even tried to fill these connections, although I removed the bridge when I saw that there was no difference.

  I have disabled the firewall completely.

  I disabled the AV entirely.

  I switched a residential group to a working network and vice versa.

  I gave you the assigned IPs devices in the router configuration.

  I've rolled back all the windows updates installed since the last time the devices showed in the PC network.

  I've removed the devices on the network, reconnected the and reconfigured to ensure that they have the media streaming (if applicable).

  I did several reboots the PC, the router, and devices.

  I added the PlayStation Network and XBOX Live and applications hosted under NAT/game on my router.

  I have enabled file sharing for devices that use 40 encryption or 56-bit.

  Additional troubleshooting information:

  When I try to add a device using the Add Device dialog box, no device never shows.

  Under media streaming options, when I look at instruments under all the networks and Local network, no unknown device only shows (even in WMP).  All devices that * show are already set to 'allow '.

  If I have access to my router configuration, the devices will appear as connected.

  I can ping devices from the PC.

  I searched endlessly on the Internet (including other threads on this forum) and have tried all of the suggestions I thought.  The only thing I can't do is activate uPNP on my router because routers Uverse do not offer this option.  However, I don't think that it's important because my PC could see these devices for some time after my last reformat and made no changes to the configuration of the router.

  Because multiple and different wireless devices are involved, and because a reformat solves the problem, in my view, it is a Windows problem, but I can't understand what to change on my system to make things work again.

  Anyone have any ideas?

  Hello

  Thanks for posting your query in Microsoft Community.

  It's a shame that you have to format the system first and now, the problem still persists. I really appreciate the efforts made to try to resolve the problem. This can be due to any dispute of third party software due to which the connection failed. I suggest you follow the methods below and check.

  Method 1: Run the network troubleshooter to diagnose the problem.

  Run the network troubleshooter

  Method 2: start the computer in safe mode with network and then perform the clean boot.

  Step 1: restart the computer in safe mode with network and check if the problem occurs, proceed as in the link:

  See: , start your computer in safe mode

  Step 2: If the safe mode with network works, perform clean boot and check if any third-party application is causing problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: To enable the network devices to display on the network map, they must meet four requirements:

  • Must be a HOME network or work: Mapping network only display the devices connected to a HOME network or WORK location. Devices connected to a network PUBLIC or FIELD cannot be displayed using the network card.
  • Devices must be DETECTABLE: The network discovery setting allows devices to be able to be seen by other devices on the same network. For more information, please consult: , enable or disable network discovery
  • Devices must comply with the LINK LAYER TOPOLOGY DISCOVERY Protocol: Topology Discovery LLTD (Link Layer) is a protocol developed by Microsoft to enable networked devices to 'discover' each other. If a device does not use the LLTD protocol so it can not be displayed in the network map. Windows 7 computers have the LLTD protocol implemented.
  • LLTD must be enabled on your LAN connection properties: The Link Layer Topology Discovery Mapper of e/s driver and the Link Layer Topology Discovery responder must be enabled on your local area connections properties panel.

  To check LLTD is enabled, you can refer to the following steps:

  a. Select open network and sharing Center by clicking on the icon of your network down to the right of your task bar:

  b. now, click connect to the Local network

  c. now, click on Properties

  d. ensure that two LLTD options below are selected (by default, these options are still enabled in Windows 7).

  From now to try the methods above and let us know the status. We will be happy to help you further.

• What happens in newspapers if the Log Insight Server is down or if the agent Log Insight Windows isn't able to commmunicate with Insight Server logs

  If the agent Log Insight Windows is not able to communicate with the Insight logs server because of a network problem or Log Insight Server is down, what will happen in the logs on the computer monitors which agent?

  Are newspapers sent again to the server where it didn't the last time?

  Is the frequency at which the windows agent sends the data to the server? Is - that, as soon as the agent believes that any changes in the log files, it is followed are sent or any interval of time is used by the agent.

  And what is the amount(size) of the data windows agent sends to the server by calling?
  

  
  

  Thanks in advance.
  

  Kind regards

  Mohan G

  1.) agent implements cache storage - default to 200 MB, but can be increased up to 2 GB. Once the cache is full, the agent will drop newspapers.

  (2.) all that is in the cache is sent

  3.) very close in real time and similar to other agents of syslog. Some batches is low, more the cfapi sends the compressed events

  4.) for cfapi depends on, but less than syslog. For syslog, identical to syslog so typically around 170 to 200 bytes. If you are looking for bandwidth calculation see: http://sflanders.net/2014/08/20/log-insight-calculator/

• I want to max my screen to be able to see the images in the messages. The ' to, subject, to and BCC occupy 25% of the screen - one under the other.

  When I view a message it is a title showing the ' to, subject, to and Bcc' message under each other in a group which occupies about 25% of the screen. This prevent me to see a complete picture of the message. Can not change this option for do not show this information at all because it is used to occupy a large part of the screen?

  Not being able to increase the resolution will mean less can be displayed, but obviously, it is a personal thing and you should be able to see the screen comfortably.

  However, I noticed your picture looks like quite like mine, although similar.

  The pale blue bar at the top of the tab should display icons "Mail Toolbar" which does not appear in your screenshot.
  It should have these buttons or icons for example: get Messages, write, address book, Menu icon and research.
  If it has been disabled, then the pale blue box would not be showing. Thus, it is a query.

  Q: do you have 'tailor-made' bar messaging tools to remove the icons from buttons?
  Customization allows you do drag icons on and off the e-mail toolbar. Do you have this is thinking he might save you space, but in fact you still have the domain - the mail toolbar, but it is now empty?
  If you have removed them in order to create a space, I would say that you put all the icons back, so that they are available. It is easier to hide the view by disabling the e-mail toolbar.

  View > toolbars > mail toolbar
  Q: is the messaging on or off toolbar?

  Disabling should you save space by deleting the pale blue box above, but it still won't create the kind of space you're talking about. Baring in mind that each image can be a different size.

  The area with of, subject, to and Bcc, should also show several buttons for example: answer, before, Archive, Junk, Delete and another button called 'other Actions '. These buttons appear on the right side. Maybe you have them, but they cropped in the displayed image.
  If the area to which you refer has done more than just the titles. It also offers you a way to click on for example; Respond directly from the email that you look.

  What version of Thunderbird do you use?

  Have you tried the 'Conversations' addon because this will reduce the headers?

  There is also another Addon called "Headers Compact" will be also reduced the size of the headers:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/

  But you are only going to win some space which cannot result will be enough to see the large embedded images.

        -------------------------------------
  

  The person who transmits the image should really be sending these images in the form of attachments, so that you can choose to view by using the correct application of the program and/or reduce the size of the screen if they are incorporating the image in the content.

  If they refuse to send the image properly and persist in sending large embedded images, then you may not be able to see full images without scrolling you have no control over how they sent the image; It could be small or huge, which will affect the ability to view an image all at once.

  For large images nested:
  The best option for you would be to right click on the image and use "save image under" choose to save the image to your computer in a right example folder: Photos. Then open and view them using an appropriate such as "Windows photo Gallery" or similar application.
  So if you choose to delete the email you don't waste the image she's saved elsewhere on your computer.