Where is Muse puts public and private reCAPTCHA keys?

Similar Questions

• How to get the public and private keys to use recaptcha?

  I registered with google to get a recaptcha for my Web site. I've gotten has been the key to site and the secret key! If I need to get the public and private key for muse!

  Hello

  Please use the site as a 'public key'key key and Secret as "clΘ privΘe".

  Concerning

  Vivek

• I need to create public and private keys for the security certificate and I can not find the certificate. Where is he?

  I bought a security certificate, and the site tells me that it has been installed successfully. I need to export the certificate so that I can create public and private keys, but I can't find the certificate to do so.

  Firefox (Firefox Orange) > Options > Options > advanced > Certificates > authorities > export

• Windows Vista: I had a bar where I could put programs and other things, it disappeared yesterday

  Windows Vista: yesterday my computer up to date and this bar I have where I could put programs and stuff diapeared. I have no idea where or what it is... pls help. I love him and miss me...

  What is the dock of Dll?

  Go to your Start Menu, all programs. Find the folder "Dell". Open it and click on your Dell Dock.

• Telepresence Content Server: Dissemination to the Public and private users

  *****

  Infrastructure:

  TMS 14.5 (private network)

  VCS - C 8.5.1 (private network)

  VCS-E 8.5.1 (Public network)

  S5.3 TCS (private network)

  Codian: Supervisor 8500, MSE 8510, 8321 ISDN (private network)

  *****

  New to this, so I don't know what would be the best way to do this, but basically the goal is to broadcast videos of TCS to the users of the network internal as live audiences without security problems. Try to do this without an external broadcast service.

  It is the State that works very well for internal users, but is not available to public users because it's on a private network.

  Any help is greatly appreciated.

  Thank you
  Mike

  You will need to provide public access to your Cameras, you can consult the administration of CHT Guide for a list of ports. We have our TCS on a private network and have the lanes of traffic through the network load balancers that rely on the public network to provide all access public and private.

• Generate public and private keys within the smart card

  Hi all
  
  I use this code to generate public and private keys within the smart card.
  
  KeyPair kp = new pair of keys (KeyPair.ALG_RSA_CRT, KeyBuilder.LENGTH_RSA_512);
  kp.genKeyPair ();
  PrivateKey prikey = kp.getPrivate ();
  PublicKey pubkey = kp.getPublic ();
  
  This code runs without error.
  
  I need to obtain the public key of the smart card. So I need to get the public key to a byte array.
  But I can't get these keys in array of bytes of plain text.
  
  The methods I can get for pubkey object are
  
  pubkey.clearKey ();
  pubkey. Equals (obj);
  pubkey.getSize ();
  pubkey.getType ();
  pubkey.isInitialized (); only these.
  
  I use
  Eclipse Version: 3.4.1 (level of agreement of the compiler = 1.4)
  Jcop plugin (to connect with the real map and to test the java code in virtual card provided by JCOP)
  OmniKey5321 (characters without contact) card reader
  
  What is the reason to get those above methods pubkey object? Is it a version problem?
  How can I get the public key in ordinary byte array? Is this possible?
  If it is not possible, is there a way to get the public key as a certificate of export or something another solution?
  
  If my script is not a possible strategy, how can I use private public keys to send the applet-specific data? Is there a better way to do it?
  
  Published by: 863766 on June 6, 2011 12:16 AM

  RSAPublicKey pubkey = kp.getPublic();
  

  then

  pubkey.getExponent(...); pubkey.getModulus(...);
  

• How to generate a public and private key when you use reCAPTCHA anti spam protection forms?

  Hello

  I designed my first website using muse for a customer. now, I want to insert a protection against spam reCAPTCHA. I followed the guide step by step from adobe, but when I want to log in to the google administration console, I'm stuck. can I use my login information to design companies that I have a business google account? and if so, where can I find the app because it does not appear on the console connection that I currently use.

  Help, please!

  Hello

  Please click the link below and login with google/Gmail code. you or your organization

  reCAPTCHA: easy on humans, hard on the Bots

  If you do not have a gmail id then just sign up on google.com or gmail.com.

  Concerning

  Vivek

• A standalone running Aeronet 1300 can support public and private connection?

  I have a client who asks if their autonomous Aeronet 1300 can support a guest network which limits the users access to the internal LAN and a SSID private access to the Internet and the internal network.

  I have looked through a lot of material on the Internet but found no direct response.  They have a very limited budget and seek how cost-effective this problem.

  Thank you

  AP is a feature of L2, so having an access point itself you can not achieve. You must have a L3 device where you can set two IVR (for comments & internal users) & restrict traffic where they can go. This device can also be NAT so that is connected to the internet.

  Then you can simply move these two VLANS to the AP & map it to two different SSID on the AP.

  HTH

  Rasika

  Pls note all useful responses *.

• Public and private IPs on the same Interface by using NAT Exemption/policy NAT

  I'm looking for some feedback on whether my thoughts on the installation program will run.

  Equipment: PIX 515E 6.2 (2)

  Scenario:

  The inside interface of the PIX will host 3 blocks of addresses IP - 24 public 2 blocks and 1 private/16 block. (All IP addresses have been replaced by dummy blocks.)

  Blocks of audiences:

  * 192.168.10.0/24

  * 192.168.20.0/24

  Block of private:

  * 10.50.0.0/16

  Traffic from the public 2/24 blocks should go through the firewall without address translation.

  The two blocs of the public will be able to receive connections initiated from the Internet.

  Public blocks will need to be able to send and receive traffic on a static VPN tunnel to our headquarters without subject to address translation

  Traffic leaving the sector private/16 block should be subjected to PAT before passing through the firewall.

  Private/block 16 will not receive incoming traffic from the Internet (other than responses to outbound connections initiated from within the private block).

  However, the private block will also have to be able to send and receive traffic on a static VPN tunnel to our headquarters * without * subject to address translation (i.e. hosts on our corporate network must be able to initiate connections to the private block and vice versa).

  The inside interface of the PIX will be connected to a Catalyst 3xxx series layer 3 switch, which will be responsible for routing all internal (so the PIX will never be routing of traffic on the interface, it was received).

  My ideas on how to implement are:

  * Use the exemption of NAT to exempt public address translation blocks. This will allow incoming and outgoing connections through the firewall.

  * Use the exemption of NAT to exempt the block private NAT when connecting to our head office on the VPN tunnel.

  * Use policy NAT w / PAT to translate the block private connecting to all other hosts.

  I have translated these thoughts in the following configuration snippet.

  Because the NAT exemption is processed before policy NAT in the evaluation of the NAT rules, I believe that this should allow the public IP blocks treat incoming/outgoing traffic without translation, while submitting the private translation block (except during handling of incoming/outgoing connections to our network of corporate office).

  Can someone confirm my assumptions about this?

  # ----------------------------------------------------------------------

  traffic of # which should be exempted from translation

  permit ip 192.168.10.0 access list nat_exempt 255.255.255.0 any

  nat_exempt 192.168.20.0 ip access list allow 255.255.255.0 any

  nat_exempt ip 10.50.0.0 access list allow 255.255.0.0 10.100.0.0/16

  traffic of # which should be the subject of translation

  policy_nat ip 10.50.0.0 access list allow 255.255.0.0 any

  # Suppose 192.168.5.1 is the address to use for PAT

  Global (outside) 1 192.168.5.1

  NAT (inside) 0-list of access nat_exempt

  NAT (inside) 1 access-list policy_nat

  # assumes that 192.168.10.7 is the IP address of the inside layer 3 switch

  Route inside 192.168.10.0 255.255.255.0 192.168.10.7 1

  Route inside 192.168.20.0 255.255.255.0 192.168.10.7 1

  Route inside 10.50.0.0 255.255.0.0 192.168.10.7 1

  #assume the following configuration sections appear elsewhere: static tunnel VPN, ACL, ifconfig, etc..

  # ----------------------------------------------------------------------

  Yes, this will work, even if you don't need political NAT for the 10.50.0.0 network. For PAT the 10.50.0.0 network when to anywhere (except via VPN) just do:

  Global 1 192.168.15.1 (outside)

  NAT (inside) 1 10.50.0.0 255.255.0.0

  As I said, you have works perfectly, the above is just an easier way to do it.

• Host with dual NIC, public and private, the installation program

  I am trying to set up an environment and I want to just make sure that its security and I'm doing things.

  My host mahchine, Windows 7, has two network cards. A single network adapter is behind a firewall, and the other is open to the internet. I wish I had one of my VMware machines to be on the public network adapter. Now I know how to do this in the network Configurator in the workstation. My question is, is that if I connect the public network for vm machine card, my physical host computer will no longer use this card. I'm just afraid to have public network map is open on my host.

  Then, is to have a VM machine linked to a NETWORK card, then only allows only not the host machine to not use this NETWORK adapter or is there a way to do it?

  Thanks for any help

  Yes, you can do it.  In the properties of the network adapter on the host operating system, disable all protocols, clients, etc. EXCEPT the VMware Bridge Protocol.  Then, VMware can use this device, but the host will not.

• Noob question - help to understand what variables public and private?

  As far as I understand public variable can be used in other classes. But how? I try this without a success:

  Create a class:

  package {}
  public class MyClass {}
  public var myVariable:Number = 5;
  public function MyClass() {}
  trace (myVariable);
  }
  }
  }

  Then, create another class:

  package {}
  public class TryThis {}
  public var myResult:Number = $myvariable;
  public void TryThis() {}
  trace (myResult);
  }
  }
  }

  and I got an error "undefined property myVariable" using this in the Flash file:

  var niceTry:TryThis = new TryThis();

  You will greatly appreciate your help.

  use:

  package {}
  public class myClass {}
  public var myVariable:Number = 5;
  public function myClass() {}
  trace (myVariable);
  }
  }
  }

  Then, create another class:

  package {}

  Import myClass;
  public class TryThis {}
  public var myResult:Number;
  public void TryThis() {}

  var mc:myClass = new myClass();

  Ditto = mc.myVariable;

  trace (myResult);
  }
  }
  }

• on my desk: Windows Firewall has blocked some features of Firefox public and private networks? What does that mean?

  I turned on my lap and a huge dialog box appears with the message above. I didn't know whether to 'Access' or 'Cancel' then just closed. Please explain.

  Firefox 36 requires the Firefox Windows to create new access rules, and Windows asks if you really want to do this.

  I do not think that these rules are necessary for the current version, but are designed to take account of the features provided in a future release, so you can cancel it just for the moment.

• Where should I put the edge files when the publication of Muse in British Colombia?

  The only thing that I could find on this is older versions of the song and the Muse.

  What I've read suggests that we must put all the edge.html and edge.js files in the root with other html pages. This leaves the edge includes in their own separate folder.

  I WAS NOT ABLE TO DO THIS WORK.

  I am able to double-click on the edge. HTML read file in a browser, but when I try to play after the publication of Muse - no luck.

  I also wonder what happens when I want to put animations of edge on several pages in a site of Muse. It seems with the root level would become cluttered with so many files Edge. And how all of these files "Edge includes" get renamed?

  I would love to see tighter integration between Edge and Muse. But for now, I would be very happy just being able to play my animations of edge in the Muse websites published. As much as I would use it, I can't use Edge if I can't get the animations to play in the Muse.

  Thanks for any help...

  Hello

  You may have not found this article at the right time, but there are Ko an article explaining how to insert the contents of edge in a site of Muse.
  Basically, what you have to do is, after you publish the Edge project, to take the exported folder or just the files, (but I'm quite to take measures into the whole folder) and download them to your FTP where the Muse website is published. After that, simply use the option "object > insert HTML...". "muse and paste the code from

• How do I know how is Administrator and where should I put the password to?

  My computer keeps asking for a password
  I have 3 standard users on my computer & no one is assigned to be administrator
  Cannot install updates because do not know or do not have a password
  How do I know how is Administrator and where should I put the password to?

  Hello

  The manual installation of the operating system on the Microsoft Update Web site updates requires the Office of the operating system to run with administrative rights.

  Please follow the steps mentioned below.

  a. click the Start button.

  (b) in the search box of start, type user accounts and click on user account.

  c. click on Manage.

  d. check which account is designated as administrator account.

  Also check out the links below.

  Why use a standard account instead of an administrator account?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-use-a-standard-user-account-instead-of-an-administrator-account

  What is an administrator account?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-an-administrator-account

  Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

• Where can I see all my muse CC sites and remove 1 or more?

  Where can I see all my muse CC sites and remove 1 or more?

  Hello

  You can click on the link below and then you can get the list of sites published by you.

  http://BusinessCatalyst.com/PartnerPortal/index.html

  Once you sign in with your Adobe ID and password, you must left click on my Sites and you will get a list desired by you.

  Concerning

  Vivek