where is temporary popup

Similar Questions

• Very Urgent: Setting dynamic where clause for Popup list VO

  Hello world
  
  
  It is a very urgent requirement please help as soon as possible.
  
  
  I have a custom page in iSupplier. I created two supplier site, number of PO fields.
  
  Site of beg - choice of Message and PO number - Message LOV of entry
  
  
  I have a named VO under xxisupplier.oracle.apps.pos.home.poplist.server for site begging and xxisupplier.oracle.apps.pos.home.lov.server for PO number.
  
  I have joined these two VO AM homepage.
  
  
  
  
  Now the question is
  
  1. I want to restrict these VO vendor_id-based so I'll put dynamically where clause for these two VO of in my CO
  
  
  VO SITE PROVIDER QUERY
  
  
  SELECT POVs.vendor_site_code site, pov.vendor_id
  OF po_vendors pov, povs po_vendor_sites_all
  WHERE pov.vendor_id = povs.vendor_id
  AND TRUNC (povs.inactive_date) IS NULL
  
  
  PO NUMBER LOV QUERY VO
  
  
  SELECT DISTINCT ai.invoice_num, ai.vendor_id, ai.invoice_date, poh.segment1
  AI ap_invoices_all,.
  help ap_invoice_distributions_all,
  po_headers_all poh,
  po_distributions_all pda,
  Al ap_lookup_codes
  WHERE aid.po_distribution_id = pda.po_distribution_id
  AND ai.invoice_id = aid.invoice_id
  AND poh.po_header_id = pda.po_header_id
  AND ai.invoice_type_lookup_code = al.lookup_code
  AND al.lookup_type = 'INVOICE TYPE'
  
  
  I am creating where cluase as below in CO
  
  
  
  If (vendor_id1! = null)
  {
  System.out.println ("vendor_id:" + vendor_id1);
  OAViewObjectImpl vo = (OAViewObjectImpl) am.findViewObject ("PO_LOV_VO");
  if(vo!=null)
  {
  vo.clearCache ();
  VO. Reset();
  System.out.println ("inside IN. VO:" + vendor_id1);
  vo.setWhereClause (null);
  vo.setWhereClause ("vendor_id =: 1");
  vo.setWhereClauseParams (null);
  vo.setWhereClauseParam(0,vendor_id1);
  vo.setOrderByClause ("invoice_date DESC");
  String INVQRY = vo.getQuery ();
  System.out.println ("INVQRY:" + INVQRY);
  vo.executeQuery ();
  VO. First();
  System.out.println ("after the query appear" + vo.getRowCount ());
  }
  
  OAViewObjectImpl sitevo1 = (OAViewObjectImpl) am.findViewObject ("SUPPLIER_SITE_VO1");
  if(sitevo1!=null)
  {
  sitevo1.clearcache ();
  sitevo1. Reset();
  System.out.println ("Interior site:" + vendor_id1);
  sitevo1.setWhereClause (null);
  sitevo1.setWhereClause ("vendor_id =: 1");
  sitevo1.setWhereClauseParams (null);
  sitevo1.setWhereClauseParam(0,vendor_id1);
  String SITEQRY = sitevo1.getQuery ();
  System.out.println ("SITEQRY:" + SITEQRY);
  sitevo1. ExecuteQuery();
  sitevo1. First();
  System.out.println ("after the query appear" + sitevo1.getRowCount ());
  }
  
  
  
  Here he works for the purchase order number but the where cluase does not work for Supplier Site. Please help as soon as possible.
  
  
  2 and also if supplier site to return multiple values then this field should show as messagechoice. If it returns a single value, then it should be the style text message
  How can I achieve this.
  
  
  
  Thank you
  CSK

  Try

  vo.setWhereClause ("IN vendor_id (" + vendor_id_qry + ")" ");

  vendor_id_qry is the query that retrieves the list of provider IDS. You don't need to put the vendor column id as whereClauseParam unless you want to have IN the clause in your query of VO and pass the list as 1,2,3 values to the parameter.

  Thank you
  Shree

• Creative Enterprise Cloud: Is it possible to choose where the temporary package files are downloaded?

  I'm a business administrator and must use a Windows computer to download and create different packages of creative cloud. Package first temp files download on the C:\ (system disk) and then the real package in the location specified. usually on a different drive/partition. I do the C:\ partition (by Re-partitioning) much larger than normal size in order to make the temp files to fit if I don't have the drive C:\ fills and creating a fair package will stop/does not work, no message. An option is possible to direct the where you want the package files temp will be held as the choice of a different drive / partition to store?

  I create 32 and 64 bit CC packets.

  Hi JohnBNO,

  You can change the location of the cache of CC. Please see the article: http://helpx.adobe.com/creative-cloud/packager/creating-packages.html.

  Kind regards

  Romit Sinha

• Where temporary target data stores are save?

  Hello

  I took two sources. A source of oracle DB, second source of flat file and then I took the temporary target as data store.

  After successfully running session, I want to see temporary target data warehouses. Where the temporary target databases are saved?

  Please help me.

  Thanks in advance,

  I had the answer... When we target as a "temporary database. After run the interface what it will look like "yellow interface. This yellow interface is the stote of temporary data. We can use this temporary database as 'the source table.

• ORA-27063: number of bytes read or written is incorrect, no space available on the device (DB went down due to no space for the temporary file)

  Hi all

  Recently, we encountered a non usual problem with restarting the database because of the ORA-27063

  number of bytes read or written is

  incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.

  Database version: 11.2.0.4

  Type of system: SAP database

  Computer type: AIX

  When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.

  My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that

  There is no free space.

  Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid

  reoccurance of this issue. Is - this recommended...?

  Thank you

  Hello

  It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.

  Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)

  Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)

  -Pavan Kumar N

• Popup lov selection

  Hi I have a situation where what a popup based on selection lov, for example I lov that got the user role list when I change user role that popup that will have inputtext where I can type the reason that the role of the user has change, I in jdeveloper 11.1.1.6.0

  My lov is

  I did it but I don't see no popup when I make choices in my lov

  < af:selectOneChoice label = "#{bindings." Roleaccesscode.label}.

  required = "#{bindings." Roleaccesscode.hints.Mandatory}.

  shortDesc = "#{bindings." Roleaccesscode.hints.ToolTip}.

  ID = "soc5" simple = 'true '.

  contentStyle = "width: 140px;"

  partialTriggers = "soc3".

  valueChangeListener = "#{pageFlowScope.InternalUserBean.InternalTypeupd} '"

  Visible = "true".

  value = "#{pageFlowScope.InternalBean.selectType} '"

  autoSubmit = "true" >

  < af:forEach var = 'item '.

  items = "#{pageFlowScope.InternalBean.childRolesupd}" >

  < af:selectItem value = "#{point}" label = "#{point}" id = "tu7g" / >

  < af:showPopupBehavior popupId = "popupMessage.

  triggerType = 'action' / >

  < / af:forEach >

  < / af:selectOneChoice >

  < af:popup id = "popupMessage" contentDelivery = "lazyUncached" >

  < af:dialog id = "d109" type = "ok" >

  < af:inputText value = "#{bindings." RoleReason.inputValue}.

  label = "#{bindings." RoleReason.hints.label}.

  required = "#{bindings." RoleReason.hints.mandatory}.

  columns = "50".

  maximumLength = "#{bindings." RoleReason.hints.precision}.

  shortDesc = "#{bindings." RoleReason.hints.tooltip}.

  ID = "it49" lines = "15" >

  < f: validator binding = "#{bindings." RoleReason.validator} "/ >"

  < / af:inputText >

  < / af:dialog >

  < / af:popup >

  Well, I see the same popuo twice in your code!

  Then you should never link a component (such as the popup) to a bean in PageFlowScope

  Binding = "#{pageFlowScope.InternalBean.radioPopupLov}" > "

  like you did. This produces errors like you see.

  Timo

• 4.2 translated 'Please wait seconds to log in again' and ' Popup calendar;

  Hello
  
  APEX 4.2
  
  I'm in the process of conversion of certain applications to 4.2
  Always left 2 small issues:
  
  On the login screen, it is an accelerator of connection that makes you wait 5, 10, 15 seconds etc after a connection failure. The error is in English, where could I translate this one.
  The message is:
  Please wait for xx seconds to log in again
  
  Also, there is a new icon for the calendar with a standard generated info-bubble/alt text that I do not know where the translation:
  «Popup Calendar: < < article label of > >»
  
  Concerning
  Bottom

  Hello

  the messages are

  -Name: APEX. AUTHENTICATION. LOGIN_THROTTLE. METER
  -Default: Please wait < span id = "apex_login_throttle_sec" > %0 </span > seconds to log in again.

  and

  -Name: APEX. AUTHENTICATION. LOGIN_THROTTLE. ERROR
  -Default: the connection attempt was blocked.

  Kind regards
  Christian

• Jspx call popup page

  Hi all
  I use jdev 11.1.1.5.0. I create a page IE Emp.jspx where I have popup in which i m calling jspx page.
  
  Can someone help out me of this.
  
  Thanks in advance
  Ruzz

  Hello:
  You can use the pop-up dialogue box. Page #1 (p1.jspx) in adfc-config and pade #2 (p2.jspx) in a (btf1) taskflow bounded. Drag btf1 adfc-config. XML as a call (tfc1) taskflow and its property runAsDialog set to true in terms of behavior. Create a navigation config adfc-file case. P1 to tfc1 XML and name. Select the action button in the case of navigation, you created earlier and set its properties to call the navigation in a popup (under behavior-> secondary window section change the property useWindow true; using the rest of the properties under secondary window to change the context menu).

  Find more information under the chapter "Using dialog boxes in your Application", Fusion Developer Guide for Oracle ADF.
  Consider this example of Andrejus Baranovskis Blog to solve other problems.

  Best approach is to use fragments of page and delimited taskflows with fragments of page within a region, however for a jspx page you can also use a component popup on the page that contains a frame inserted.

  Good luck.
  Rafael.

• Temporary file path is not valid. LR cannot start. Mac OS10.4.11 LR 2.7 Mac

  Need help. Just go open LR and get this message. Then it closes. I ran DiskUtility and fixed permissions. Still no workie.

  So what temporary file path is he referring? Where is he?

  Any help would be appreciated. Thank you!

  All process (same GUI) will be an environment that he spent, and a part of this environment is the path to where the temporary space can be used by the application.

  Somehow it is missing, which I've never heard of on OS X. I suspect it's a problem with how the Lightroom app package is installed, which means may there is one of these times a relocation can actually help. Move the old Lightroom app directory/packet in the Applications of the road first.

  Things less invasive you can try first:

  I guess you rebooted the system? Try cleaning the temporary directory. You should be able to find it by opening a Terminal and typing "echo $TMP".

  [Later]

  Check that/var/tmp (you need to use the Terminal to access this folder) is cleaned on reboot. If this is not the case, make sure that there is and it is almost empty. You will probably not be able to delete anything there that you are not the owner, but we want to see is that it is not filled with hundreds or thousands of directories and files of higher level.

• Display of the IPTC description in overview in film

  Windows XP SP3, LR3

  When you move your mouse over an image in the film, you get a temporary popup showing the fields IPTC title and description of the image.

  Unless I missed something, this behavior cannot be changed.

  This can be a problem when the description field is VERY long.  It can cover a large part of the screen and can be very annoying.

  I have a number of photos where I have a VERY long is on this particular image.  It's annoying that I have spend on these images of the film and appear momentarily huge pop-up windows.

  There should be a way to disable this feature, or at least limit the amount of the description field that appears.

  Gary

  You can turn it off.

  Right-click on film and select Display Options-> Show image info ToolTips.

  Moreover, these tooltips show what loupe info overlay mode is set to show. You can configure to show something shorter, such as the news of exhibition or time, dimensions etc.

• archive e-mail iOS 10 not work properly - sending mail in the trash

  I have the s 6 + and have just upgraded to iOS 10. Both of my Gmail accounts are related to the mail of iOS and the parameters are defined on archive on the server (all mail in gmail) to throw. Under IOS 9, a simple click in the icon of the archive at the bottom of an email in the mail application would immediately archive correctly.

  Now with 10, there are 2 problems/bugs.

  (1) on the court by clicking on the icon, a temporary popup seems to offer options for archive or cancel. It is an unnecessary extra step and should be removed (long click always takes me to the popup to archives/trash/cancel)

  (2) However, by clicking on the text results (click for short or long road) archive in my mail goes into the TRASH. This seems to be a BUG. Very frustrating because now I need to move manually ALLMAIL emails now correctly in the TRASH

  (For info in the snippet view, slide to the left seems to archive correctly)

  Anyone had similar problems? Any ideas if there is a hack to work around this problem?

  Yes, it's very frustrating and is not a step 2 useful to archive omg

• Can I prevent auto download of temp files?

  What I would like is for downloads to start after I have decide where they will go. I don't want a part temp file built in a folder mobile or whatever. I use windows and this seems to be a problem in all versions. Basically, I would come back where my download will be saved and then for firefox start download file room and all. At the very least, I want to foreshadow where the temporary file is stored for security reasons, but would be better to send it to a place of my choice every time.

  You are welcome

• Upgrade of El Capitan 10.11.2 to 10.11.3 gets stuck

  My El Capitan at level 10.11.2 to 10.11.3 gets stuck in a loop...

  The update file is downloaded from the App Store and the iMac will restart and try to install the update, but after a few minutes, I get a message from the system (in my native language: Dutch) which translates something like: . Then the iMac restarts for 10.11.2 and the system asks me when I want to install the update.

  I tried this loop 4 times but the result is the same.

  Anyone know?

  -the solution to this loop?

  -where the temporary downloaded update file is, so I can remove it and try a new update?

  Install the Combo update from this page.

  Apple - Support - downloads

• Multiple reporting of test problems in TestStand 4.1.1

  We lack TestStand 4.1.1 and LabVIEW 8.6.1.  We have a vast repository of production and test fixtures, with lots of code-sharing and others.  We build installers for all of our tests and deployments every night with a build server automated.  We have newer versions of the TestStand, LabVIEW, but due to process bugs in TestStand deployment (and installer of construction), we can use them with our footage/projects/workspaces.

  We have traditionally been configured to test as html reports, because it is easy to visualize the reports not only on the test set-up, but on any other platform.  The problem is that the html reports are difficult to analyze programmatically.  To do this, you really want the report xml format.  The problem is that the xml reports require a style sheet, and the viewer only, we have learned to work is Internet Explorer.  It's not very portable, especially on platforms.

  So we got the mandate to produce test reports in both formats.  I found a thread here describing how in TestStand 3.5.1 and started with the model of update sequence posted in this thread.

  http://forums.NI.com/T5/NI-TestStand/create-two-TS3-5-reports-XML-and-ATML/TD-p/471394/page/2

  I need to edit the SequenceModel file, and some mods are also required in the ModelSupport.seq file.  I don't want to change the default settings, so I make copies of the files and specify that my sequences use modified versions.  Thus, the process I use so far goes like this:

  . Copy the file

  C:\Program NIUninstaller Instruments\TestStand 4.1.1\Components\Models\TestStandModels\ModelSupport.seq

  TO

  C:\MyWorkingDirectory\ModelSupport_multiReport.SEQ

  . Download SequentialModel.seq from this thread
  http://forums.NI.com/T5/NI-TestStand/create-two-TS3-5-reports-XML-and-ATML/m-p/471394

  . Copy the file to
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ

  . Open the sequence above in the sequence editor
  . under the following subsequences, there the integrated sequence called ModelSupport.seq sequence request.  You must redidrect these calls to use
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ

  . sequence calls that may be needed are found in
  Test DUT
            
  Simple pass
  Configure the report Options (call to the "Configuration of Report Options")
  Configure the Options of SecondReport (call in the "Configuration of Report Options")

  . create the directory
  C:\Program NIUninstaller Instruments\TestStand 4.1.1\Cfg\SecondReportDetails
   
  . Note that the "Cfg" directory is a shortcut to
  C:\Documents and Settings\All Users\Application Data\National Instruments\TestStand 4.1.1\Cfg\

  . in SequentialModel_multireport.seq, find references to
  "C:\\Program Files\\National Instruments\\TestStand 3.5\\Cfg\\SecondReportDetails"

  and change them to

  "C:\\Documents and Settings\\All Users\\Application Data\\National Instruments\\TestStand 4.1.1\\Cfg\\SecondReportDetails"

  . There are several references
  . Test the DUT-> Get 2 Report Options
  . Single pass-> get 2nd Report Options
  . Configure the Options of second report-> Edit Report Options

  . After making the changes, check in your main sequence
  . Configure-> second report Options
  If the configuration window starts, all is ok so far.

  . Change the sequence file to require different model
  . Change-> sequence file properties, Advanced tab
  . Model-> specific model required
  . Go to the
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ
  . Ok
      
  Finally, the problems:

  1. normally, when you run the sequence in "Test UUT" mode, when you stop (from the serial number prompt USE), the last test result appears in a pane view in sequence or the test Executive Editor, who ever you happen to use.  This causes a "TempReport.html" file to be generated in the reports directory, and normally, this file is deleted when reject you the report viewer.  This deletion occurs is no longer, and the directory will start to accumulate files "TempReport_0002.html," "TempReport_0003.html".  It is not desirable.  I went looking through the template and related files, but could not find where the temporary file is created or deleted, nor I could find where the viewer within the sequence editor is called.

  2. If the first report is html and the second is in xml format, the resulting xml file can no longer be read or in the sequence of the other editor or test the view of the Executive or in Internet Explorer pane.  The message in IE is:

  The XML page cannot be displayed

  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  Error running Microsoft JScript 'null' is null or not a subject line = 381, col = 3 (line is offset from the beginning of the sc...

  I checked, and there is nothing unique or commonplace online 381.  Column 3 is a space, and the rest of the line contains data used elsewhere and only some ordinary tags.  If the order of the reports is enabled, the xml report is visible in the view report sequence editor and through Internet Explorer.  (In other words, do the first report of the xml file and the second the file html.)  Now, I know what you think.  "Doc, does it hurt when I do this.'" " Well, don't do that! "If it works one way and not the other, use the way that works.  My concern, however, is why the resulting xml data files differ?  If I let this slide, it will come back as a big issue later, after that the memory of how I created this so is cooler?

  3. If I pull up to configure-> Options pane of report in the sequence editor, finish, so don't wait several seconds before pulling up to configure-> second report Options, the editor of sequences often disappears from the desktop.  A few seconds later, I get that annoying dialog box 'Do you want to tell Microsoft about the problem?' that appears when a program crashes and dies.

  If anyone has come across this, or how to fix it?  Thank you.

  M

  Hello

  I was not able to get the files that you use to work, but I found a model of different sequence on our DevZone page that works for me, trying to create two different reports.  It can be found here:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3278

  As it says in the instructions, simply change the local variable called 'DisplayedReportFormat' in the file tworeportssequentialv30.seq on "html" or "xml" to change the output type of the second report.  The first type of report is normally configured via the menu.  Also, be sure to change the options of station to use this model.  I have confirmed that it works and that the temporary file is also deleted every time.  I hope this helps!

• Cannot retrieve saved word document so that in an email

  My daughter has created a word document. We have 2007. She then sent it me for my review.  I made a few changes and sent it to him.  It opens the e-mail message and the attached document.  She has made some additional changes and sent to me for a final review.  She said that when she tried to close out, the system asked her if she wanted to save him, she said yes.  Unfortunately, when she sent him back to me, it is the previous version and not with its recent changes.  I was told by some people that the document must be 'somewhere' but nobody seems to know where it is 'somewhere'.  I tried to look in the temporary folders but can't seem to locate it.  Help, please!

  With AOL, I have no idea where the temporary file might have been placed.  For the future, by saving the document attached to a record, publishing and the recording, then re - install it on a new message will be completely avoid this; you will have the unmodified document still attached to the message and the modified copy saved to a known folder.  Here is an article that can help:

  How to recover a lost in Word 2007 or Word 2003 file
  

  It could also appear in the "recent items" in the start menu.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com