Cursor images are cut off 20%-80% of the height, has been very good in 34

Similar Questions

• Cannot open an image of PS. I think that the file has been corrupted?

  Well, I'm an artist and I use Photoshop to draw. I was in the middle of working on a drawing, and then my computer crashed. What it a few times and I saved the image fairly recently, so I was not too concerned. But when I tried to open the file after I restarted my computer it says "could not complete your request because it is not a valid Photoshop Document." I tried to see if I could open on Sai and it wouldn't let me (and Yes, SAI is comparable with PS files i ' v open PS files it several times before). I tried to copy the file and open the file copied, but that did not work ethier. How can I fix? I'm quite upset because I lost all my progress in the arts, especially when I liked how it came out.

  Thanks for any response.

  Hi roseh82388884,

  Please try steps below and see if they help

  1. first create a copy of the image as a back up

  2. check this link below to enable filename extensions

  http://blog.LapTopMag.com/show-file-extensions

  3. now, please try it out below mentioned steps.

  • Right-click on the file-properties
  • Under general, change the file for the name.tif file extension
  • Click on apply and then ok

  Now open the file and see if that helps

  Concerning

  Rohit

• Right side of placed images are cut when exporting to PDF

  Hi all

  I am a beginner still trying to wrap my mind about InDesign and all its features and have encountered a problem with export to PDF. On the right, 1-4 pixels are cut off! I think my problem may be related to what has been discussed in this thread:

  InDesign, problem of Image with PDF export... straight cut...

  But my question has nothing to do with Visio. I'm simply put PNG and JPG files that have already been created and stored locally on my computer. I found that the only way to solve this problem is to add a few columns of pixels of space white/empty in my images so that the straight line of frame in the images (created by Adobe Illustrator) appear.

  Having to change my images first before placing them in InDesign is obviously not the best or the right solution.

  Does anyone have any ideas what could cause this problem and how to fix? Maybe there's a setting somewhere for the picture frames that should be adjusted?

  You say that the border is the placed graphic? No, don't do that. Make the image as the image only, apply the border via the framework (and via an object style).

  I don't know why the gross pixel is truncated, could be an error in the workflow or a bug, it should not happen, but you must not include in the file anyway.

  When the files came from Illustrator, use HAVE or PDF/X-4, never no raster such as PNG, BMP or JPG image. If it is printed, text and vector will be printed with the maximum resolution of printers and the quality, raster images cannot be better than the resolution of the image. PNG also supports only RGB and print it not so good, because it would be a CMYK graphic with clear black.

• in newly improved LR6.4, when I want to import from SD card, the images are in a random order, not the order that I pulled on them.  Images are scattered.  Once imported, the images are correct. How can I get the import to be in the order that I pulled on

  in newly improved LR6.4, when I want to import from SD card, the images are in a random order, not the order that I pulled on them.  Images are scattered.  Once imported, the images are correct. How can I get the import to be in the order that I pulled on them?

  Is there a sort option near the bottom of the import screen. Have you tried different sort options that are available?

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• Envy4502: The lines are cut off on high or low or completely missing

  When I try to print, sentences either entirely missing, or they are cut on the top, bottom or both.

  I tried to run diagnostics on the printer, clean the heads, check the alignment and run printing and scanning doctor and went through all the steps on the help page for printing any unresolved problems. I also changed the ink cartridges that did not help either. I used always to HP Print on this printer cartridges.

  Someone else posted exactly the same problem and they were to refer to the help with the steps page which is not this problem anywhere.

  @Rainy_Lake,

  Welcome to the forums today!

  I hope to help you with the problem of partial printing that you are facing your craving 4502, on Windows 8.1. I understand you tried to align the printer, running the PSDr, cleaning of the printheads, etc. anything.

  Then try the hotfix download here: a work of wireless, printing high quality to a WSD port is cancelled automatically on a windows 8.1

  Try to print from a few different programs later and tell me what is happening in each of them. Please also let me know if you can make copies of the unit successfully, or if there are problems with them as well.

  If you like my answer to your concern today, click on the thumb upward below!

  I hope to hear from you, enjoy your day

• Appellants are cut off when leaving a voicemail message

  I'm having a problem when I call DID number of the person to the PSTN destination and record a message that is longer than 40 seconds, the audio is cut roughly the second 40 mark. If I call internally for an ip phone registration is not cut.

  I have several locations with centralized/CallManager unit on the host site. It seems only to happen now a remote location. When I call a DID and it sounds through the unit, I see that the port in monitor status of the unit said it saves the message and it allows me to leave a message up to 300 seconds without disconnecting me, however, when I go to listen to the audio message gets cut off after about 40 seconds. If I leave a voicemail to 60 seconds long, I'll hear the VM for 40 seconds and silence for another 20 and then I get the unit "If you want to save this message press 2,... ». If the unit is not cut me or I'm not get disconnected to the PSTN, just the audio destination stops. I can duplicate this every time.

  Here is some background info:

  -VM unit 4.0.2 only

  CallManager - 3.3.4sr2

  -TSP 7.0.2 (I think) I can check a second time if necessary.

  -2620XM gateway gateway router running IOS c2600-ipvoice - mz.123 - 14 T 3 .bin voice and communicate with CallManager use MGCP.

  -Calls come in the 2620XM router via ISDN PRI.

  I don't have the opportunity to reboot the router, servers CallManager or the unit still. I will start by restarting the router because it seems only to happen to this place, but I wanted to see if anyone out there has seen cela before or he could offer some advice.

  Thanks in advance for any information.

  you need this command in the rtr.

  No mgcp timer receive-rtcp

• photos are cut off

  After downloading my pictures to a disc, and then try again to view, they are cut and chopped and I can't get the whole picture.  Help, please!

  It is likely that your browser is maximized and obliging to overhang the visible area.  Try to turn your zoom to 100%

• Image is cut off and zooms in CFDocument.

  I use CFDocument to create a .pdf file. The basic layout is in a table. In the table, the size of the image is 119 x 153. When the pdf file generates, it zooms in and cut a part of the image so that only the top-left 1/3 of the image is displayed instead of 119/153. I'm using the height and width tags, have tried absolute and relative links. I tried everything I can think of. If I hit refresh, sometimes it shows the complete picture as if it was supposed to, other times he still cut the image. I paste in my code. Any suggestions?
  
  

  Make sure that your cf server is upgraded at 7.01. It's a bug that has been fixed.

• I noticed that some jpeg (RGB) images are not display in Internet Explorer 11, but they present very well in other browsers. In addition, the images used to display properly in Internet Explorer. No idea what is happening?

  I noticed that some jpeg images are not display in Internet Explorer 11, but they display well in other browsers. I checked they are RGB images, because apparently some people accidentally use the CMYK format. IE is configured to display the images - I checked that also. The images used to display properly in Internet Explorer, and the images have not been changed on the server. The content was created using Dreamweaver CS6 and Photoshop CS6.

  I tried to view the page on other computers running IE, and they also have this problem.

  Any idea of what could be causing this to happen?

  Thanks for looking in this people!

  I discovered that prevented a few images to display in IE 11, while other images show. The culprit was Adblock Plus for Internet Explorer. Once, I disabled the software Adblock Plus missing images showed once again. Interestingly, I discovered that I could cause the same effect in other browsers using Adblock software. There is either a bug in the software of Adblock, or fluid network of Adobe system, which caused some legitimate images should be blocked. Whatever it is, they do not play well together right now. All images are stored on the same domain, and none of them related off site, so it's pretty weird that they have been blocked...

  Anyway, the mystery is solved! I know people like to see a conclusion to these things as much as possible, so I'll mark this as resolved issue.

• The copied images are reversed black to white since the update to El Capitan - any ideas on how to switch back?

  Since I updated to El Capitan I struggle with copied images are black on a white background stuck reverse - white on a black background.  Has not happened before and I would like to have the images than the original paster.

  Where is - what happens?

  Photo.app? Preview.app.?  Files in folders?

• I put a site with 2 rectangles (one above the other) in the footer and is cut off when I write the site

  The depth of the rectangle is fine when I view in muse but only cuts off when published

  Hello

  It is because of the text in the middle of the rectangle box (in HAND Master page), please increase its width, and then try to preview.

  Please take a look at the screenshot. I have it increased by 311 px and his work form me.

  Please take a look at the screenshot for better understanding.

  

  Concerning

  Vivek

• Exported images are of large file size, but the small screen

  

  Something has changed in my export settings, and I can't understand it.  If I insert a file into any application (i.e. PowerPoint, Word, Publisher) that I exported to LR5.7 before last week, the end images (image of female left) look if I export a new image, the file size is large (10 MB), but when I insert into any application, the image itself is extremely low (male right image). I know that's not the image itself, because I've tried it with images that have worked in the past which has worked and now have the same issue. If I try with resize in the image program itself just gets very distorted and pixelated. Any thoughts on what is wrong or what I screwed. I've also included a picture of my LR export window

  Maybe Word etc read the 5000 pixels per inch setting in the exported file and timing of small file in the application.  Change to 200 or something and see what happens.  This has not test so it is maybe not the right direction to solve the problem.

• Table header row gets cut off from view when the text block is resized

  I'm designing a table that has a header row, 6 body rows and 5 columns. I want the header skewed to 20º and rotation type of needles from the same angle. Knows someone who worked with tables, it is not possible to rotate the text to this value via the parameters of the cell, but the job is to split the table into two blocks of text. The lower sash will be the body lines, but the Executive must have the header where it gets skewed to the specified angle. The text must be created in separate and then cut and paste frames in each column header and then it can be rotated.

  The problem I have is when I try to drag the bottom of the text block to the top while the header remains visible, the header gets cropped view. The only way to prevent it from is Cup is I leave the first line in the frame, but then it gets skewed is not what I want. It seems that the block of text ignores the header still exists. The screenshot below has two tables. The top version is the one that I want to apply the effect to. The bottom has the effect, but his top line is a line of body (not a header).

  

  I don't think that it is possible to have a heading row without at least a body line in the framework...