Where is the alias XNET file located on a cRIO?
I managed to delete my cRIO alias XNET .xml file. The problem is that the alias Manager does not connect to the cRIO (error BFF63101). The connection is fine - I can FTP, connection of the user interface, etc. I tried to let fall the firewall but no go. I suspect that it is related to the fact that the cRIO abruptly stopped allowing anonymous FTP.
Rather than spend the next several hours troubleshooting a connection problem for a transfer of files of 3 seconds, I had rather just copy the xml file on manually. However I don't know where he's going. Can someone point me to the right directory on the cRIO?
Very long story, but I finally got it working. The short version is that a few months back the cRIO suddenly would not accept anonymous FTP so I had to put a password for the account. Annoying but not too bad. But I suspect that's why XNET database alias Manager unable to connect. If I clear the INVESTIGATION period, then I got an error message. If I tried specifying "user nameassword@ipaddress" he complained it wasn't a valid IP address.
While that fiddling around with it, suddenly I could not connect via the web. He said that the web server did not work. Then I reinstalled the web server software. I was wondering if this would allow the FTP anonymous now so I removed the password of the account. Already when I tried to do, he would say I couldn't have an account with a blank password, but this time it took. Now, I could connect with the alias Manager and it works beautifully. Alias downloaded, and my code works now. Frankly I still don't know what I did. Debugging Voodoo: try things until it works.
In response to my own question, I still have no idea where are stored the XNET database aliases, but I think that information would not help me anyway. When you deploy a database, I think remember that LV converts into a kind of binary format.
Tags: NI Software
Similar Questions
-
where are the valid BACK files located in windows 7?
I'm a key USB bootable recovery in what directory can I find the files BACK?
1. pointing to c:/windows
results - message: "there is no valid DOS system files at the specified location.
2. I tried in c:/windows/system had the same message:
"There is no valid DOS system files at the specified location.
3. I tried in c:/windows/system32 got the same message:
"There is no valid DOS system files at the specified location.If this directory files can the valid BACK is found
The reason why you can't find the files BACK, it's that there is no place for BACK in Windows 7. BACK is a legacy 16 - bit operating system introduced 30 years ago. Its files will not work on Windows 7 machines.
Windows 7 has a built-in tool to create a bootable CD, the "Windows repair CD. You can do this via the control panel / backup and restore. It is much more powerful than the BACK: it gives you full access to all partitions NTFS and it can accomplish several tasks. BACK could never do either. Highly recommended.
-
Where are the "System Restore" files in Windows Vista Home Premium
Where are the "System Restore" files in Windows Vista Home Premium.
I would like to simplify the installation process.
Is there a program in Windows Vista Home Premium which can create an image disk for future use.
Is there a good disk image program/software?
Can I record a restore point on an external drive? That is, only the last 5 days of "restore points" are available in the system restore.
Hi SoundHealth,
Follow the steps in the article.
Restore your computer from a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
Back up your programs, files and system settings
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files
No, you can't save a restore point on an external drive.
-
On a 9870, where is the SQLite db file?
I would like to manually remove the SQLite db file my request of Webworks has created on a device to 9870 (6.0.0.666). Problem is that I can't. I have CAD on a 9900 without problem.
I don't know where the database is created and stored. Someone at - it suggestions? Is it possible to explicitly define where it is stored?
Thank you!
> Is it possible to explicitly define where it is stored?
No, this is handled by the underlying platform of the Web.
Search in the following location:
\\BlackBerry\system\appdata\rim\
You have a SD card on your 9870 / 9900? If so, it may have been recorded here.
-
Where is the folder "working files"?
I'm trying to view the "Walk through a video project" tutorial in the help of Photoshop and the author uses examples of PSD files located in the folder "working files". Where is this file? I find it on my computer anywhere.
These videos are allowed to Adobe by a 3rd party called infinite skills group.
To access work files mentioned in the videos, you must subscribe to infinite online courses.
-
Where are the fonts for FCPX located?
Hello
Where are the fonts for FCPX in my MacBook Pro to mid-2015?
There are 3 files for fonts: System/Library/Fonts, Library/Fonts, ~ Library/Fonts.
It seems to be Library/Fonts, but I see that some are not used in FCPX, so I want to be sure. If I'm right, why some is used in FCPX? Looking for don't not to add them, just curious.
The best
Elmer
All fonts are system fonts, no specific applications.
Fonts can be of different Types of fonts.
FCPX uses only specific fonts Types, not all types, the system recognizes.
-
My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...
Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothingHelp, please!...Hello
Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.
In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Description of the tool in Windows XP disk cleanup
http://support.Microsoft.com/kb/310312
Step 2: Run a virus scan to make sure that the computer is Virus-free:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
For more information:
The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer
http://support.Microsoft.com/kb/812248
It will be useful.
-
How it synchronizes work? where is the master sync file?
When I use sync, where the master synchronization file is? The last two times I used sync, none of my favorites, history etc. have been transferred to the new Firefox. You want a new version of Windows 10. The other was a version of PCLINUX. both are on the same computer. Do I have to import/export instead of synchronization?
1 sync "synchronizes" all selected data so that it is the same on all devices.
2. the 'master' file is on the server synchronization, insofar as each device data are sent to the server, where the data is merged. Once each device is connected to the sync server, the data must be the same on each device and the same as on the server.
3. the export / import will work to transfer bookmarks on a device, adding the existing bookmarks on the device. Do that more than once and you end up with a lot of duplicate bookmarks and folders of bookmarks; Unlike synchronization where bookmarks duplicate as a group.
-
Where is the screen saver files in Windows Vista?
I found a cool screensaver that I would use, but I don't know where to copy EXACTLY. I am running Windows Vista and there is not an installer with it. I tried to find the other folders/files screensaver but am not having much luck and there is not much information I can find. Help!
Hi Dave,.
The files (.scr) screensaver in Vista are found in C:\Windows\System32. You can search in this place the .scr file you want.
For more information on the screen savers, you can consult the following article:
Hope this information is useful.
-
Windows 7 Enterprise - where is the UserSnippets.xml file?
Hello:
In earlier versions of windows, the UserSnippets.xml file was in the slot location.
Windows: C:\Documents and Settings\ < username > \Application Data\SQL Developer\UserSnippets.xml
However, in Windows 7 (EA), there is no C:\Documents and Windows\Redirection... so under what directory, I can add my UserSnippets.xml.
The location of this directory can be configured in SQLDeveloper? I use SQLDeveloper 3.2.20.09.
Thanks for any support - YeshHello
On Windows 7, the location should be something like...
C:\Users\
\AppData\Roaming\SQL Developer\UserSnippets.xml -Gary
Published by: Gary Graham may 1, 2013 13:19
To configure the location of the user settings, add a line like this a...\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf to your installationAddVMOption - Dide.user.dir =
-
Where is the MasterData.xml file?
When our users using our application, an error is logged in the event log that it cannot find the MasterData.xml file. Aid works, but it is subject to see the error message in the event log and also after some time or ignore a popup is received.
While doing some research, we found references of the file MasterData.xml in the whtopic.js file. I read that this file supports the navigation bar, but I can't find any references to the file MasterData.xml and if I have no control over this name.
Any help would be appreciated.
I use RoboHelp 7.01.001.In case someone else runs as FusionnerCet posted, there is another ad if you do a search in all forums for RoboHelp. It basically says that Adobe is aware but it does not help them. Since it affects the event log in our app and seems wrong to our customers that we got around it by creating a file empty named MasterData.xml. We get is more the error and help is not affected negatively.
-
Where is the money backup files?
I use Microsoft Money Deluxe 2006 in Windows 7. The record money in Program files does not list the latest files from backup.
Where Windows 7 is hidden?They are stored there where money is set to store.
If the location is everywhere in the Program Files area, that they will not be saved. Program files in Windows 7 (and Vista) are a protected area.
Your Money data and the backup files should be stored in My Documents or another area that is not protected.
-
Where is the "recently opened files" list in Windows 8 Pro?
With the new format of starting "tiles", I see no list of recently opened files - where is it? File Explorer has recent locations, but it's just folders, not files.
List of recently opened files - where is it?
B.G.
File Explorer has recent locations, but it's just folders, not files.
In fact, I started my answer about it. It is after all in Favorites (aka links). So why not have Recent there too? And why is not new just a hidden directory, but that you have to change your point of view to see? ; ]
HTH
Robert Aldwinckle
--- -
Where is the sessionstore.js file in ver41 (Win 10)?
Hello
I use an extension (FEBE) to back up my browser, as part of this FEBE takes a copy of sessionstore.js. Since I upgraded to win 10 and 41 FEBE Firefox generates an error when you run a backup. (sessionsstore.js not found)
If I look in the C:\Users\michaeltrucker\AppData\Roaming\Mozilla\Firefox\Profiles\y3vhq0bc.default-1446331514952 the sessionsstore.js is not there. If I close Firefox, and then the file is created. As soon as I open this file disappears from FF? WFT!
If I want to take a copy of the file that contains the info from my session where it is stored while FF is open?
Thank you
Michael
Learn about the sessionstore-backups folder. While Firefox is running, you can expect to see:
- Recovery.js: the windows and tabs in your Firefox session currently live
- Recovery.bak: a backup copy of recovery.js
- Previous.js: the windows and tabs in your last session in Firefox
- Upgrade.js -build_id: windows and tabs in Firefox that was alive at the time of your last update session
When you shut down Firefox normally (that is, it does not crash), recovery.js is removed from this folder and used to create the main level of the profile sessionstore.js file. When you start Firefox, the process is reversed. (I don't know why they decided to do it this way.)
-
Stop the Firefox autocompleting file location?
When I enter the URL of a certain site Web NSFW bar addresses, or just part of it, Firefox with two locations of files autocompletes embarrassing. They take the following form:
file:///C:/users/[username]/downloads/[embarrassing filename] #_tabcomments
and
file:///C:/users/[username]/downloads/[embarrassing filename] .htmApparently, it's something that I've downloaded in the past. These files no longer exist, and if I right click on locations, no shortcut menu is displayed. I think its to do with offline files I opened with Firefox. How can I make Firefox forget about these places? I deleted all the history, but to no avail. I don't want to turn off AutoComplete. I downloaded an add-on called form history control but could not find any matching entry to use.
Can someone please offer a solution?
You can remove some URLs from the address bar. Just type in what you are going to spend, use the arrow keys to move up and down on the sites that you want to delete and simply press the DELETE key (not BACKSPACE) to delete this entry. Works for me on Linux
Maybe you are looking for
-
Canon LiDE 700F scanner driver for OS10.11
Since the El Capitan upgrade my Canon LiDE700f scanner is not recognized. I can't find a new driver for OS10.11 on Canon website. Any advice?
-
y/t - graphic: discrete values are displayed at all times
As soon as I want to display values discrete y/t - graphic, they are permanently displayed (the adjacent function values are connected) See for example: The lower graph should show the following discrete function: x | (fx) ---|-------- 2. 0 3. 1.27 4
-
itstrong phoned me and asked me to install software remotely exe, showmypc3010, is this a legitimate business or a con?
-
the Vista Home Premium, Vista Ultimate upgrade error
I need to upgrade a laptop Vista Home Premium to Vista Ultimate to connect to a network of MS Server 2008. Home Premium runs on SP2 and I bought an upgrade ultimate retail package which has Ultimate SP1. When I go to install an update (I don't want t
-
Good daycommunityof Dell. Because of your issues, I am pleased to present the information, specifications and requirements for m2 on various models of Dell below. Precision 7710: Internal dives supported: 3 Lead taken configurations supported (max):