Where is the command prompt on the on the HP Envy 14 laptop boot menu?

Similar Questions

• HP Pavilion HPE h8 - 1260t CTO: stuck at the screen with the words "Press ESC for Boot Menu" on the bottom

  I unplugged the graphics card to clean dust. After that I connected everything again, he stuck to the blue screen with the words "Press ESC for Boot Menu" on the bottom. If I press ESC at the beginning, it will go to a black screen and it will show the basic information of the computer (information about the processor and memory). It also show this black screen, "Press ESC for Boot Menu" on the bottom and it will show "Start menu" in the lower right corner. If I press F8 at the beginning, it's going to be the same black screen, but it does not "Start menu" show in the lower right. If I press F10 at the beginning, it will go to the same black screen, and it will show "setup" in the lower right. Can someone help me solve this problem? And thank you very much!

  So I suggest to look at the following and try to 'Clear the CMOS settings' as described at the bottom of the page: HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-CH2 (Chicago).  Then see if there is no change at all.  If there is no improvement, then use the following http://www.hp.com/contacthp, fill in the form, create a folder for your question and then use the information to contact HP.

• Hi where is the link of database previously Windows menu?

  Hi where is the link of database previously menu Windows

  Removed feature: functionality of server, covers and panels and database components behavior

  There is a unique extension to restore these features. Extension is available at: * Vista/Windows 7: C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CC\Configuration\DisabledFeatures * Mac OS X:/Applications/Adobe Dreamweaver CC/Configuration/DisabledFeatures

  As seen on http://blogs.adobe.com/dreamweaver/2013/06/a-look-at-the-modernized-dreamweaver-cc.html

  Video instructions on how to install these file available here: http://www.youtube.com/watch?v=cB2vmNfcq7A

• The HP Envy 17 laptop Quad t allows the base to extend HP xb3000 (docking station)?

  I got a HP Pavilion dv9000 for about 7 years and use it at home with the HP xb3000 expansion base that has USB connections as well as the Altec Lansing speakers like the laptop.  A connector on the base of extension plugs into the connector on the expansion of the Port 3 on the Pavilion dv9000 and it has always worked very well. It allows additional hard disks must be installed in the base of the expansion, but I have not used this option.

  I recently bought a HP Envy 17 quad t laptop with Beats Audio speakers.  It doesn't have a connector of the expansion Port 3, so I was wondering if there is any type of connector/adapter allowing the HP xb3000 expansion base be connected to and used with the HP Envy 17 T.  Any suggestion would be appreciated.  Thank you and have a great day!

  Hello

  Envy has no expansion port so the base is useless in your case. A few other products that use the USB port would be useful.

  Kind regards

  PS a compatible list updated January 21, 2014:

  http://en.Wikipedia.org/wiki/HP_xb3000

• TouchSmart HP ENVY 15-j151sr: where are the drivers for my laptop?

  I bought my laptop with windows 8.1 and all the drivers have been installed. I can't find drivers for my laptop after reinstalling windows 8.1. Where can I download it?

  Try again. It is reported that the problem is solved.

• where is the microphone on my laptop, model NB204UA #ABA number

  I try to have a SKYPE interview and caller does not hear me, and it seems that my microphone does not work.  Where is it on my computer so I can activate it?

  Hello

  You forgot to mention that it was a HP computer.

  Check with HP, their drivers support and documentation online and ask in the forums of HP for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Where is the site for my laptop - Satellite U500?

  Hello world

  I have toshiba laptop:

  Satellite U500-1DQ
  REF.: PSU9ME-00100XAR
  Serial number. : 3A023206R

  I couldn't find exact location :-(
  Can anyone help find?

  Thank you

  And what site you're looking for?
  Download drivers site maybe?

• HP Envy 13 laptop: Bluetooth doesn't work is not on the HP Envy 13 laptop

  Good afternoon

  I recently bought a laptop from HP Envy 13-d004a and could not get working Bluetooth.

  Without wireless/bluetooth adapter is an Intel Dual Band Wireless-AC 7265.

  Bluetooth is not listed in the page menu settings/Windows device.

  There is no Bluetooth device listed in Device Manager.

  There is an unknown USB device (device descriptor request failed) listed under Bus USB controllers I think it is perhaps related to the problem. The State of this poster features 43 code.

  So far, I tried to uninstall and reinstall the USB devices and update drivers for USB devices. However, the USB device is unknown, with a warning on the icon symbol.

  I also downloaded the latest Intel Bluetooth driver update utility. When I run the installer, or the repair, I get the message

  "Intel Bluetooth Service (ibtsiva.exe) could not be installed. Make sure you have sufficient privileges. ». I am connected with administrator privileges when I run the installation program.

  So far all my attempts to solve the problem of Bluetooth failed, would be more appreciated all the help I get.

  Thank you

  John

  Bluetooth problem has now been resolved on my HP Envy 13-d004na notebook.

  Tonight a Synaptics SMBus driver has been downloaded and installed via Windows Update.

  After the installation of this driver, I restarted the computer.

  After restarting Bluetooth appeared in Device Manager and peripheral USB unknown displayed previously had disappeared from the Device Manager. I tested Bluetooth connectivity and am now able to pair with my Bluetooth mouse.

  Surprised, but very happy that the problem has been resolved and that the laptop now seems to be fully functional.

  Thanks again for your help.

  John

• The virtual computer's BIOS boot menu +.

  Hello

  At the start of my virtual machine, I pressed the ESC key and open the start menu:

  1 + removable devices

  2 + hard drive

  3. CD-ROM drive

  4. network boot

  Why 1. and 2. I sing anymore? It is that that means that 1. and 2. have sub-menus?

  The + sign indicates sub entries. If you go into the BIOS, you can see what they are.

  Here is an example.

  

• The HP Envy 17 line t there 2-Bay SATA or SATA 1 and mSATA?

  The line has Envy 17 t 2 drive bays?  If so, is it 2-Bay SATA or 1 SATA and 1 mSATA? In addition, on the hardware selection screen:

  

  If I choose this option, you guys at HP will install Windows on the SSD, instead of on the hard drive?  I found 256GB SSD which is much cheaper than $295, but I searched and found that HP has apparently put a restriction on the BIOS that prevents you from booting from an internal hard drive that you have added.

  EDIT: Maybe I could also get the 256 GB SSD and add my own hard drive.  But I still need to know if she has 2 SATA or 1 SATA and 1 mSATA.

  banhien wrote:

  Hello

  Well, when I said page #2, I meant Page 2. Now, at least you have read a book.

  See you soon.

  Now, we don't need to be mean to them, I don't think that the HP Forums are the big giant HP Experts incredible tiny bit intimidation of people asking for help.  I'll just buy the HP Envy 17 Laptop Touch t and see what type of port it has for me. Next time I will ask these questions on NotebookCheck.

• Re: How to run the update to the BIOS of the DOS - Satellite A100 PSAA8A command prompt?

  I'm having some trouble with my GF Satellite A100 (PSAA8A). When installing a new HARD drive with a clean install of XP, I flashed by chance, one of the BIOS when installing drivers. Its kind of bricks now.

  Using a floppy disk CD boot, combined with the update of the V6.00 BIOS, I goes to a DOS command prompt, but not sure where to go now.

  Under * Tradional BIOS update *.
  See the link: [http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  It is said:
  + 1. Extract the zip file containing the BIOS upgrade to a temporary folder. +
  + 2. Three subfolders will be generated in the temporary folder. "docs", "update - 3.5' disc', 'Update - CD - R or CD - RW +.
  + 3. Insert a 1.44 MB diskette formatted in the floppy disk drive. +
  + 4. Run the *.exe file in the folder "" Update - 3.5 disk ". Follow the instructions on the screen. A BIOS update diskette will be generated. +

  But there is no 3 folder. There is only a single called S10VWF that contains Winphlash etc. (see photo url). As far as I know, I can only run Winphlash Windows environment due to its GUI. Then what should I do? Help!

  http://img.Photobucket.com/albums/v259/tRUkbOY/S10SWF.jpg

  Hi Brett

  There is a little thing that you have forgotten or supervised.

  The BIOS you downloaded is a version of BIOS to WIN. It s not traditional BIOS update!

  The description published in your ad describes the update using the traditional BIOS.
  But the Toshiba driver page only provides updates of BIOS based VICTORY. The BIOS can be upgraded only from Windows operating system running.

  Please don't mix these two possibilities of updates!

• ReadyShare drive unusable in the DOS command prompt

  I have a Nighthawk C700 - AC 1900 WiFi cable router Modem where I configure drive ReadyShare USB access.

  When I type the UNC "\\READYSHARE\USB_Storage" and type the Admin password for write access - I "can" see the files/disc in Windows Explorer. I can map the UNC path as a player U:\ and I can see/access it very well in the GUI.

  However...

  Once I go to a CMD command prompt (even tried as admin) - I see 'no' this player U:\. Error message = "system cannot find the drive specified."

  ReadyShare drive is a USB 2.0 disk formatted in Win7 to NTFS 2 TB external.

  I'm on Windows 10 v1607.

  If I connect the USB directly to my computer - I can see/access this drive U:\ locally and use the CMD utilities against it very well (robobopy.exe).

  Anyone working on this issue and or knows how to get CMD to use/see the ReadyShare full-access/write?

  Thank you...

  Peter

  Update: it's working now. ?

  I've upgraded to the latest version of Windows (1607.14951.1000) 10.

  I also upgraded Netgear engineering to v2.4.32.

  I "can now use/see the drive Readyshare in a CMD Shell."

  I can run normal DOS commands on this very well mapped drive.

  I had to modify my script robocopy to remove the /COPYALL and /ZB settings as I guess that Linux/NAS does not support these settings, but I can now, with the click of a shortcut on the Desktop - Sync/restore my files the on the network to the NAS drive.

  I don't know if it's the change in Windows or in engineering who has been around.

  hope this helps others too.

• Update Live from the command prompt

  Hello

  I create an executable whose purpose and to make the creation of a winPE bootable USB key easier.

  To create the key, I need to run multiple commands with the systemexec.vi. Many of these commands take ages at the end so I need to know whether or not the command is still in progress.

  What would be great is to have a live update from the command prompt. I guess there should be a way to insert the command line in a secondary or other container?

  

  Best regards

  Try to redirect the standard output to a file, as in this example:

  ping 192.168.0.46 > out.txt

  If your utility supports redirection, you can read the contents of the file at any time.

  Be careful to choose a working directory where your username has write permissions.

• How to program a chkdsk using the command prompt?

  could someone tell me how to plan (for once only, not repeatedly), windows automatically fix file system errors and find the attempt to recover bad sectors, using the command prompt? I want to perform this check to my external hard drive when windows are on the boot sequence, not on the 'normal' environment for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hello

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  To the guest who is probably similar to C:\Windows\System32 >

  This type by replacing X with the correct drive letter.

  CHKDSK X: /f /r

  Where X: is the drive letter for the external drive - spaces after: and f.

  C:\Windows\System32>chkdsk X:/f/r

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Is it possible to run the restore of the system from a command prompt?

  Plug;

  Dell Studio 540 Quad core 3, 2 GHz (don't remember exactly?) processor

  Ram 8BG

  Windows Vista Edition Home Premium

  In general, everything was working fine until I ran the auto update for Vista. I don't know exactly which updates made it crash (that's the downside to update automatic, I guess?), but what happens is;

  PC powers up correctly, and everything seems to be in order up to and including the connection procedures. Once connected, the first error message pops up saying: "Windows Explorer" is not working properly and has restart. This will make a loop again and again, and as long as the error is running, I'm not able to perform all actions either. The only thing I am able to do, is to run the Task Manager, but if I try to run applications, programs or processes there, the Task Manager itself is in need of a reboot. So, basically, the only action I can perform the Task Manager is turn off the PC safely.

  Helps out;

  Ran memory diagnostics, no error found.

  I ran system restore, not detected no results. (....) According to me, if I could run Vista system restore as soon as Windows Explorer is stable, I can choose a restore point prior to the restoration defined point in chest upward and it will solve the problem.

  I ran the repair of the system, but the PC does not recognize a problem, according to the definition, the start sequence works as it should.

  I ran the security modes to see if I can access previous system restore points, but like windows explore does that no action can be taken. It's the safe mode; Base drivers and base with network connection drivers.

  I ran the command line safe mode, that works very well, but don't really know what I can do from there.

  I have the option to reinstall the OS, but I hope a response must be made of this? My thought is;

  Is it possible to run the restore of the system from a command prompt? And if so, where is the path, finally, what should I do?

  This starts the system restore
  %systemroot%\system32\rstrui.exe
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
  --
  ..
  --
  "Arefare" wrote in message news: f6b7f70f-b8a0-4291-ae95-92a4d659f16a...
  > Care;
  >
  > Dell Studio 540 Quad core 3, 2 GHz (don't remember exactly?) processor
  >
  > Ram 8bg
  >
  > Windows Vista Edition Home Premium
  >
  >
  >
  > In general, everything was working fine until I ran the auto update
  > for Vista. I don't know exactly what updates does plant (it is
  (> the disadvantages of the automatic update, I guess?), but what happens is;
  >
  > PC powers up correctly, and everything seems to be in order until.
  > and including connection procedures. Once connected, the first error message
  > comes up saying "Windows Explorer" is not working correctly and to
  > restart. This will make a loop again and again and while the error message is
  > ongoing enforcement, I'm not able to perform all actions either. The only thing
  > I am able to do, is to run the Task Manager, but if I try to run a
  > applications, programs, or processes, the Task Manager itself needs
  > a reboot. So, basically, the only action I can perform the Task Manager is
  > turn off the PC safely.
  >
  >
  >
  > Helps out.
  >
  > I ran memory diagnostics, no error found.
  >
  > I ran system restore, not detected no results. (....) I think that if I could
  > run Vista system restore as soon as Windows Explorer is stable, I can
  > Choose a previous restore point as the restore point defined in boot up
  > and it will solve the problem.
  >
  > I ran the repair of the system, but the PC does not recognize a problem, as in
  > definition, the start sequence works as it should.
  >
  > I ran safe mode to check if I can access previous system
  > points of restoration, but as windows explore does not perform any action can be
  > catches. It's the safe mode; Base drivers and base with network drivers
  > connection.
  >
  > I ran the command prompt in safe mode, which works very well, but don't really know
  > what I can do from there.
  >
  >
  >
  > I have the option to reinstall the OS, but I hope a response is to
  > do this? My thought is;
  >
  > Is it possible to run the restore of the system from a command prompt? And if so, where
  > is the path to him, finally, what should I do?
  >