where is the page reload option toforce of a new page online

Similar Questions

• where is the plug in option tab in the menu bar when acrobat pro is installed on a mac

  where is the plug in option tab in the menu bar when acrobat pro is installed on a mac

  When Acrobat is installed all first, it doesn't have a Plug-ins menu. When you buy plug-ins for Acrobat, some plugins will add a Plug-ins menu. Some don't - some will add the other menus, or buttons or something else.

  Then

  1. make sure that you purchased the plug-in Mac (s) you need.

  2. make sure that they are installed.

  3. make sure that they are compatible with your version of Acrobat. the Mac is much less forgiving on versions, you should check carefully.

  4. If the plugin is compatible and installed maybe it does not add a plug-ins menu.

• Where is the button reload

  I would like to put the button reload of the menu bar, but it is not in the Customize page so I can drag up to the menu bar.
  It is in the old verson of Firefox it's over now

  Harold

  Hi Harold,.
  
  Here's how to make it work:
  
  Install the module additional Classic theme restaurant- https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/

  This will give you a reload button 'extra' that you can move in the toolbar. If you open the Add-ons Manager, click on the Preferences button for this module then there is an option to hide the reload button located in the address bar.

  More about this add-on is here - How to make the new look of Firefox as the old Firefox.

  Let me know if you encounter any problems.

  -Michael

• Where is the page files?

  I am running Vista Home premium. I want to reduce the size of my partition of my boot c: drive. I want to find my page files and move them to another drive and then reduce the size of the partition.

  Where are they?

  How can I see them?

  How can I move them?

  Hello

  The page file (Pagefile.sys) is a hidden file on your hard drive that Windows Vista uses as if it were a memory (RAM). The file exchange and physical memory is the virtual memory. By default, Windows stores the paging file on the boot partition (the partition that contains the operating system and its support files). The default paging file size is equal to 1.5 times the total RAM. However, this default configuration is perhaps not optimal in all cases. This article describes how to configure the paging file for optimization of the system and recovery.

  You can follow the steps in the link given by bob.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-set-to-no-page-file-and-i-cannot-change/992de6a8-bec2-4E74-b6d9-d418a7f5cda0?TM=1367819685901

  Alternatively, you can follow the steps to move the paging files.

  1. Log the computer as an administrator.
  2. Click Startand then click Control Panel.
  3. Click performance and Maintenanceand then click System.
  4. Click on the Advanced tab, and then, under performance, click settings.
  5. Click the Advanced tab, and then under virtual memory, click change.
  6. In the drive [Volume label] list, click one drive other than the one on which Windows is installed (Windows is usually installed on the drive C). Under Total paging of the size of file for all drives, note the value that is displayed next to recommended.
  7. Click custom size, and type the value recommended in the initial size (MB) box.
  8. Type the maximum size that you want to allow for paging in the size maximum (MB) , and then click set.
  9. In the drive [Volume label] box, click the drive on which Windows is installed (usually drive C), and then use one of the following steps:
     • If you don't want a swap to disk file, click No paging file, and then click set. A message similar to the following message is displayed:

  If the pagefile on volume C: has an initial size of less than 126 megabytes, then the system may not be able to create a debugging information file if a STOP error occurs.
  Continue anyway?

  Click Yes.

  1. • If you want to keep the minimum size of the file on the drive, click custom size, and type a value that is equal or greater than the amount of RAM in the computer in the initial size (MB) box. Type the same value in the box size maximum (MB) , and then click set.
  2. The following message appears:

  The changes you did ask you to restart your computer before they can take effect.

  Click OK, click OK, click OK, and then click Yes when you are prompted to restart the computer.

  Hope it helps you to solve the problem.

• Where is the hyper Terminal option in Windows 7?

  Hyper Terminal Server in windows 7 Pro

  I'm not able to locate the hyper Terminal option under windows 7 Professional, please update on this issue.

  Hi, hyperterminal is not available in Windows 7, it was also not available under vista. It is possible to run hyperterminal, although it is NOT officially supported. If you have a Windows XP CD, look for hypertrm.ex_ and hypertrm.dl_. Copy it to your hard drive. Extract them using a program (I recommend 7zip) and place them in the same directory. Run the .exe will allow you to use hyperterminal. You can also view this Web page. social.answers.microsoft.com/Forums/en-US/w7programs/thread/938d4225-30cd-4db5-a0a0-bdeb9c439269

• Where is the 'previous version' option in my app in window of creative cloud filters?

  I need to download CC12, but do not see the 'previous version' option in my app filter drop-down. Anyone know where I could look at?

  

  Here's what I see:

  

• Where is the page of comments to submit?

  How to access the page to "comment"? All I get is irrelevant to questions that others have posted.

  @Waka_Flock_Flame

  Hi-
  Yes, you're right! Thank you. At first, I thought that you meant to type in this way, but then I checked the Firefox Button real (that I don't normally use) and click on help and this is. Then I finally found it on the Menu bar the same way, as aid. I would have thought to check there first. Should not be so impossible to find as supported, but I see the logic of having easily accessible like that and have only problems with it under support. I think that I became like this in the past, but he forgot.
  Thank you, once again!

• Where is the other button Options described in airport utility instructions 6 above?

  I can't find the button "Other Options" mentioned in the 6 instructions for Airport Express Airport utility: how to join an existing in client mode WiFi network... can someone direct me to the right screen?

  If you are using an AirPort Express station with a 3rd party wireless router, the 'Join a wireless network' option should appear automatically when you start the installation program "Assistant".  In the example below, the Express will be configured to join a Uverse wireless network.

  

  Well that "Client Mode" is never mentioned anywhere in 6.x or 5.x, AirPort utility when the Express is set up to "join" to a network, it is in client mode.  Apple's not exactly makes very clear.

  You may not, but the other Options button down, bottom left of the window in the example above. Choose the option 'Add to an existing network' if the Setup screen does not suggest firstly that the Express will be set to 'join' the network.

  If you are using an AirPort Express station with another router from Apple, the installation wizard will automatically configure the Express to "extend a wireless network. Once the installation is finished, you can go back using AirPort Utility and manually change the setting for the Express ' To develop a wireless network ' to 'Join a wireless network' and then update to save the new settings.

• Where is the character encoding option in 29.0.1?

  After the change of the new provision, the menu Developer do not have character encoding options more where the hell is that? He drives me crazy...

  Hello tyw214, there is a dedicated button for the character encoding that you can add to your menu customization mode: controls, buttons, and Toolbars Customize Firefox

• Where is the PLSQL report option in Apex 5.0.1

  Hello.

  I use Apex 5.0.1.  I am creating a report (non-interactive) classic, based on a PL/SQL script.  It is something that has always been available to previous versions of Apex.  Curiously, I don't see that option anywhere.

  Can someone please tell me where it is and how to access to create a classic report.

  Thank you.

  Elijah

  Hello.

  Later, I discovered the answer to my question.

  It turns out that I simply enter the function, as in:

  DECLARE

  TEMP VARCHAR2 (1000);

  BEGIN

  TEMP: = ' SELECT * FROM EMP';

  RETURN TEMP;

  END;

  That's all it was.  What confused me is there is no specific option from the choices (shown in my screenshot above) "report Classic (based on the function).

  It's strange, though.

  After I have save the report above, I see that the report is now correctly reported as:

  

  Thanks a lot for your help.

  Elijah

• Where are the sensitive design options in the adobe muse 2015 updated?

  There is no mention of anywhere, this means that it is not there?  Probably the most important feature wanted today thanks to Google.  Who wants to create three models for hundreds of pages when you can create one that is suitable?  Or have I missed something, maybe it's there somewhere and I'm not?

  Also how do you consolidate files to move them to another system, I can't find this feature anywhere, I must have missed that too?

  Oh and one thing, how to create a blog without leaving the site, I can't find anyone, only the RSS thingy featured.

  Three very important features that I can't find, they must be hidden somewhere in the menus, Adobe may not omit these, please help me someone?   Bueller?

  Joel

  Sensitive is not an option as Muse uses absolute positioning. Available in Muse Mobile display is fully compatible with Google. Items require a technology side server like PHP with a database. It is beyond the scope of Muse.

  Not exactly what you mean by consolidate files to move them, but you can "export as HTML" and do what you want with the HTML and CSS files. Remember that if you change the files outside of the Muse, you lose compatibility.

• Elements 8... where is the lasso tool option? Watch is not in the Toolbox

  I'm working on a project and have heard of the lasso tool, but cannot find the option icon for it in my box selections tools.  what needs to be done to include this option in my toolbox?

  The lasso tools are nested. Then right-click where it says on the screen:

  http://www.pixentral.com/show.php?picture=1DOvCXWzPSsgHQMcURvrdNdJiCTjo

  That should open it for you.

• Where is the paragraph bulleted option in ID CS5?

  I can't find the option lists bulleted in CS5! What Miss me?

  The top image is the customization panel in CS5. The second image is of CS4.  Where the option of bulleted paragraphs in CS5? Help

  : Steve

  

  See the other thread where you posted this. I think you have the BNUI extension off.

• where is the page of the market?

  Hi-

  This page of the market seems interesting, but I can't find a way to access, or if I already have an account there. is this the same sign as my connect you in support of Qs?

  Thanks - susie margaret

  https://marketplace.Firefox.com/

  For what is an "account" on the market, it looks like it uses a separate registration system. None of the other Mozilla site 5 accounts I have are recognized for "sign in", and all 5 accounts of my friends use the same email address / 'username' and password.

• Where is the page Web Transfer button disappeared?

  Anyone know what happened to the next button on the Web page. Is it possible to make it available? Or has it been abolished?

  Running version 25.0.1

  Thank you

  It has not been deleted, but it appears that if there is 'history' to go forward.