Where's my scanned document?

Similar Questions

• D110 HP all-in-one: scanned document is not saved on PC and I have no way to specify where to send the document

  Operating system Windows 7 64 bit D110 all-in-one.  Serial number I uninstalled all D110 software and reinstalled, I can print.  I can't use the printer screen that says scan to PC.  Translated by Scan strive "try scan from computer or see the documentation.  Press OK' I can scan a document I have to see/hear the D110 Scan but I don't know where it is saved.  I can't say if it even happened in my computer.  When I scan, I do give me no choice about where to save the document.  Nothing in the help HP addresses this problem... that is a new problem.  I have not installed a new software or hardware.  I can see the D110 in printers and devices.  The D110 is connected to my Satellite L755 by a USB cable.

  Hi Dextery,

  No doubt seems strange that you do not have an HP Solution Center. When you have installed the software, you saw error messages during the installation?

  In the meantime, try scanning without using HP software. Here are a few methods:

  Scan using Windows Live Photo Gallery video

• I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  Hello MichelleOZ,

  Items scanned by scanner are stored as Images (usually from the MPEG files) so I would look in the pictures folder. Otherwise if you remember what you call the files when you saved them you could also search for them via Windows Explorer.

  File photo:

  1. open Windows Explorer

  2. look in the folder list on the left side of the Windows Explorer window

  3. Locate the folder of photos

  Search:

  1. open Windows Explorer

  2. place your mouse cursor inside the Windows Explorer search box (upper right side of the Windows Explorer window), and then type the name of the file that you want to search

  3. Windows will now search for the file.

  4. once found, click on the file to open it.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I want to set up a system where I can scan a document to my printer office or word or anything to make corrections or changes to this document and fax it to another part

  Original title:

  Word pad

  I want to set up a system where I can scan a document to my printer at the office or Word or how to be able to make corrections or changes to this document and fax it to another party. How can I do this I need a pdf file what kind of programs do need me and how configure this right now, I have windows 7 which pdf file do I need and I have Microsoft office 2010 I need to up grade

  You cannot change the scanned document as you would for a normal Word document. The computer sees it as an image. You can get a PDF Editor and make comments, highlights and other, but you can make a Word document.

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• How can I get my C7280 scan documents since the charger?

  Maybe it's obvious, but I can't get my HP C7280 scanning documents that I put in the tray to be analyzed one by one, through the feeder. What happens is that I get the receipt tone she knows there are documents in the feeder, but when I press the scan to the computer, it does not use the charger and I find myself with an empty scan!

  Is there some setting or secret for her to know, hey I put documents into the feeder, so feed them, scan them, and repeat until the vacuum. Thanks for the help!

  Dan

  When you scan to and to?   I just scanned a document from the charger, I used the HP Solution and the Panel before, Photosmart and it worked.  I don't want to insult you, but you have the face to print up? I checked if there could be that button magic but not that I can see. If you click the change setting button the only options in there are material (glass or Charger) and photo (glass or Charger) I guess the printer detects where you place the document to be scanned and takes it from there.

• Works 8.5 How to input of scanned documents

  Works 8.5, we are trying to seize the scanned documents.

  Please reopost your question in the Forum works: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.works.win&cat=en_US_77e075ae-c07c-4ce8-aac1-e366715b1549&lang=en&cr=US where the words experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Scan fax w7 64 how to fax a scanned document

  I am able to fax using option NEW FAX (modem, etc. is configured correctly)...

  Now I want to fax a SCANNED document. I tried the following:

  .

  1 the document scanned...

  2. his appears in my image file... I rename to doc1

  3. I find the doc1

  4. I click on NEW FAX and enter phone num, subject, cover of information page and click SEND

  5 - the fax is sent but only the front page (my DOC1 is not sent)

  What I am doing wrong?

  Thank you

  You don't mention the part where you attach the document to the fax to send. This could be a problem... :-)

• Why I said no e-mail program when you try to send a scanned document

  Just bought the new laptop HP Pavilion and new HP printer all in one.

  First of all, I'm stuck with Windows 8 (horror! after XL)

  In addition, never used a scanner before.

  Configure printer OK. Not sure where the scanned document should go in 'Library', but managed to find a picture I had scanned.

  When you want to send the picture, I get a message that basically said...

  No e-mail program to perform the requested action. Install an e-mail program or, if you have already installed, create an association in the default programs control panel...

  as far as I can see, in the default programs control panel, when I click on the EMAIL he just said Microsoft windows. Cannot change, delete, replace... cannot do anything.

  I don't know that I'm being stupid. I have no one to ask. I am nearly 70, do not understand half of what is all about. Can anyone help - in understandable English, please.

  Thank you

  Just bought the new laptop HP Pavilion and new HP printer all in one.

  First of all, I'm stuck with Windows 8 (horror! after XL)

  In addition, never used a scanner before.

  Configure printer OK. Not sure where the scanned document should go in 'Library', but managed to find a picture I had scanned.

  When you want to send the picture, I get a message that basically said...

  No e-mail program to perform the requested action. Install an e-mail program or, if you have already installed, create an association in the default programs control panel...

  as far as I can see, in the default programs control panel, when I click on the EMAIL he just said Microsoft windows. Cannot change, delete, replace... cannot do anything.

  I don't know that I'm being stupid. I have no one to ask. I am nearly 70, do not understand half of what is all about. Can anyone help - in understandable English, please.

  Thank you

  Hello

  If you are simply trying to select an image file, right click and select send to/recipient of the message, it will not work if you are using the default Windows 8 App Mail.

  You must have a Desktop Email program is installed to do this, such as Windows Live Mail, which is part of the Windows Essentials range.

  Windows Live Mail - free

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-other-programs

  To attach the image using Windows 8 Mail App, open the Mail application and select new email message.

  Click on the paper clip icon in top/right (attachments).

  Navigate to the folder where the image is stored and Select the file.

  Click the button to join at the bottom of the screen.

  This will attach the file to the new email.

  Let us know if you have any other questions.

  Concerning

• My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

  My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

  Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

  Ok. So, the answer is certainly: Yes, it is possible.

  The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

  Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

  When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

• OfficeJet Pro 8600: Officejet Pro 8600 won't save scanned document

  I've updated to Mac OS Sierra 10.12 and I can't save a document scanned from my office. It scans the document ok, but the "Save" button is grayed out.

  I can scan and record directly from the parser.

  There is no driver listed on the HP website for 10.12 - the latest driver listed is of 10.1

  Anyone know how to fix?

  I have a MacBook, which is still under El Capitan and it works very well as my Mac did until I updated the operating system. I also note that Sierra is not on the list of OS for this post.

  Update on my problem - I discovered I can save the scanned document using the Print - command, function.

  So I guess this will fix itself when HP to produce a new printer driver for this OS.

• Where will my saved documents

  HP printer saves documents m

  It is essentially your question:

  ""I was using Word/Pages/Safari. " I opted to print the page. My HP printer has active AirPrint. But when I print, it says it's in "My Documents saved." Where exactly are these documents? » »

• scanned document not to transfer on the desktop after put 10.11.2 updated

  HP Officejet Pro 8610 scanner can be controlled by OS X but scanned document does not appear on the desktop as shown on the details page.

  Update.  File can be found in "All My Files" but it's not the location that was requested on the scanning.

• Cannot open the scanned document

  I use an officejet 8600 +.  I can't open the documents that have been scanned in PDF format.

  Hello

  Each of them or just one or two? Please scan 1 page (for test) computer and select document , and then open the scanned document.  You may need to update Adobe reader as mentioned on the following assistance:

  http://helpx.Adobe.com/Acrobat/KB/cant-open-PDF.html

  Kind regards.

• Photosmart premium C309g-m: lack of disk space when scanning documents in pdf format for PC

  When you try to scan documents to pdf format on my computer (connected via a wired network), including multiple pages, the throws of sweeping to the top of this error message 'More disk space - remove unused files to free disk space' the error code below is 4, [(3,11,0)].

  I seem to be OK with a single page at low resolution in B & W - 150 dpi but not more than a few pages to this resolution, or even a single page to a higher resolution and the error message is thrown upwards and will not save the file. Clearly I'm not memory hard drive because there is a lot of space and I tried recording on multiple disks.

  If I scan everything straight to a USB stick plugged into the printer it works OK but scan documents as a picture and crops, more it only scans one page and then save it.

  I tried to install a patch from this forum question http://h30434.www3.hp.com/t5/forums/postpage/board-id/Scan but it made no difference and my windows 7 was not an upgrade of vista

  Hope someone can help with this

  Hi Oscardod,

  You are welcome!

  I guess one inadvertently lead solution, is always a solution! Laughing out loud.

  I'm glad that everything is fine.

  Best regards!