Where the ACTIVE Control Panel

Similar Questions

• HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel

  Hello

  Although I can scan a document from my laptop I can't do it from the printer control panel.

  I tried following the instructions in the Support Center
  "HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).

  Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...

  Thanks for your help so far.  I now have much more HP files/programs that I started with.  What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.

  I ordered the following cable to establish a connection between my laptop and a printer?  I hope it is the right one.

  USB printer cable lead for HP Hewlett Packard and Lexmark A - B

• After you disable the speakers in the Sound Control panel, how to re-enable?

  On Vista 64-bit with latest updates, in a hurry to catch a signal continuously with the sound only through headphones, I turned off one of the entrances in the sound control panel, which was the laptop speakers.  This was done by selecting the element and selecting Disable in the right click menu.  When I come back to this Board for re - activate the speakers, they are listed is no longer and are not doing a scan for the hardware.  How can we reactivated the speakers?

  The audio device is "SoundMAX Integrated Digital HD Audio", and the computer is a Lenovo Thinkpad T61P.

  Hello

  Right click speaker near clock - reading devices - right click in the area of the boxes - check see the disabled and disconnected devices. Select speaker, then on the right click lower properties check the settings for the active device usage and so on. Also do the same to set up in the bottom left of this box.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Markers in the effect controls panel

  I'm up to page 165 of the Manual 6 first, trying to figure out the markers, and he says:

  Create markers in the effect controls panel

  In the effect controls panel, you can view all the markers that you created in the timeline panel. You can also add markers to your sequence to designate where you want to place effects and see the markers when you work in the effect controls panel. In addition, you can create and manipulate markers directly in the effect controls panel.

  1. drag the playback cursor to where you want to create a marker.

  2. right-click (Windows) or Ctrl-click (Mac OS) in the rule of the timeline:

  In first Pro CS5.5 and even before, choose define a brand of sequence and then choose the type of marker you want to set.

  In Premiere Pro CS6, choose Add a marker, or press the M button.

  I followed these instructions to the best of my ability, and nothing appears in the effect controls panel. The three preceding paragraphs are labeled as CS5.5 and earlier versions. I wonder if this paragraph should also labeled as CS5.5 and earlier versions.

  CS6, markers appear in the effect controls panel? If they do, how they appear get you?

  CS6, markers appear in the effect controls panel?

  Yes.  First of all, make sure that you have a selected clip and that the playhead is on the clip selected when you add a marker.  The ECP will only show markers outside the bounds of the selected element.  Second, make sure that you can see time of sovereign of the ECP.  It is easy to hide the view of the chronology of the ECP.

  Jeff

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I can't find the touchpad Control Panel

  I can't find the touchpad Control Panel.

  @ejake

  Hello

  Download and install the driver for the Touchpad ALPS to here.

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• The hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view.

  The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?

  Thank you very much for your support

  Alain Truchat

  Split from here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/left-hand-pane-on-Control-Panel-missing-XP-Home/6ca7e184-e2be-4709-b865-81e5c3702629#last

  Hi, Alan.

  Reset Control Panel-
   
  Press Windows key + R
   
  Type inetcpl.cpl regsvr32.exe/n/i
   
  Press ok

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• Installed programs do not appear in the Windows Control Panel

  I use Windows XP SP3.

  When I install a program, in this case my Mustek BearPaw 2400TA more scan, it does not appear in Control Panel. I reinstalled the software of the scanner several times, but still, it never appears in the control panel

  Also, is there a way I can have complete control on the control panel? To activate the newly installed programs, etc. ?

  Hey bud,

  Please write in the Microsoft Community Forums.

  According to the description, I see that the Windows Control Panel shows all the programs installed in Windows XP.

  I suggest you to follow the article provided to solve the problem:

  Incorrectly, Add/Remove Programs tool displays installed programs

  http://support.Microsoft.com/kb/266668

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  
  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Due to operating system Windows or anything related to the printer, feel free to get back to us.

• Error: Could not find the com.sun.deploy.ControlPanel of the main class when tried to open the Java Control Panel

  Original title: could not open the Java Control Panel

  I just downloaded a new update of Java 6 and it doesn't work. I use Java to view charts & graphs of changes in the stock market & it works with applications that I used before, but not for that I started to use after the new update has been installed.

  I tried to fix it by clicking on the Java Control Panel & I get this message:

  Class main com.sun.deploy.ControlPanel is not found

  How can I fix?

  Hi Chris240560,

  Try to Uninstall and reinstall java and check the result.

  For further assistance, we recommend you to make contact with The team of Support of Java for better assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer not found displayed on the printer control panel. ?

  Computer not found displayed on the printer control panel. It analyzes not but prints ok. Running the utility HP scanner Diagnostic 4.2 says service Windows Imaging does not. If you ignore this message says the Twain service does not work because it is used by another service?

  Problem solved. I managed to get Windows Imaging served running afetr a lot of the research and this scanner enabled to work. Thanks, but does not need your help after all!

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Computer freezes Vista, get the error of the audio control panel has stopped working

  my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work

  Reference Dell inspiron 5305 windows edition running Home premium

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller