Where the "brush selection" in CC?

Similar Questions

• keep the brush selected with pen tool cs4

  I like to use the tool pen with a brush selected, in previous versions has been able to choose a brush and
  
  He would remain selected, but I can't find a preference for it in cs4. any suggestions?
  
  Thank you.

  In the appearance Panel Menu, uncheck the option "New Art has basic appearance."

• hide the brush

  When I made a change with the brush, the gray slider for selecting the edition is no longer appears. How to find this slider?

  Hear the gray circles show where the brush edits started to leave, that is to say the fist place you clicked to start the brush changes? If that's what you're looking for, you have them hidden. Press H (lowercase) to show or hide (UN-hide) them / it.

• smoothing causes the offset of the brush

  I have a cintiq companion 1 and have had no problems with it until recently. When you use Flash Pro CC it lags when I fast repetitive shots. When I draw a series of vertical lines slowly, there is no problem, but when I draw vertical lines quickly, the bottom of a single line will connect to the top of the next line. the circles drawn slowly looks good but circles drawn quickly are more like a "D" ' instead of an "O". I had a similar problem with the intuos model, but it was fixed by restoring a previous backup. There is a period where the brush stroke is be smooth. No other line is saved until the first line is smooth (smoothing has 26 and takes about a half second) so I can't quickly draw lines which is very annoying.

  I uninstalled and reinstalled Flash and the Tablet driver. I disabled "hold for right click on", "shortcuts" and "windows ink".

  The lag is worse in files that have the most content, and new documents have less lag. There is no lag in photoshop but flash is what I most need.

  It started three days ago and I have no idea what is wrong. Neither Flash or the driver has received an update recently

  64-bit Windows
  8 GB RAM
  i7 processor

  No, it is not likely to corrupt, but you have probably reached the amount of wall of vectors in the comfort zone of the Flash. It is also possible that you have added to many executives. How long lasts the timeline? He started the bog nearly 10,000 and much sooner if you have large elements in the files. Also if you tween a large vector element it will be certainly small decrease in performance. A few ways to solve this problem is to untween and wait until you're done, or to hide this layer which will sometimes help. IF you try to make a movie with several scenes that have origins and animation in each they typical that did in a production environment is to break down each scene individually and then export them separated for the assembly in a video such as Final Cut Pro or Premiere Editor.

  Also the amount of blank space you have on your drive hard drive can affect performance as well. If the file is huge and it lags behind, then you close and open a new or another file and it continues to accuse, then this might be a memory problem. Zipper, restart the computer, when it's done open Flash and start a new file. HE hangs out? If Yes, then your question could be Flash prefs are corrupt, or it is possible that you have a hardware problem. If there is NO lag, then open the disturbing of the file, and then close and reopen another file and if there is lag then it is likely that the problem is the loss of free memory after opening the file because your computer will not release the freed memory after that the troubled file sucked everything.

  In any case, that's all I can think of at the moment so I hope that one of those is a good solution.

• Problem with the brush CS4 tool 'paint inside of fashion'

  When I use the Brush tool in Flash CS4 in "Inner painting" mode it erases the part of the lines around the shapes. For rectangles, it clears the line on the side top and left, where the brush head crosses, although he never seems to have an impact on the other sides. The effect is less consistent with ovals, but it breaks the lines in some places. I use Flash CS4 version 10.0.2 on Windows XP, and I checked for updates via the Help menu. Here are two examples:

  

  As I understand it, the Brush tool should not change the race anywhere in this mode. I would be grateful for any help.

  There are very long Flash, at least go back to version 8. I'm not sure, but it certainly affects only two on the four sides of a square. There is a bug on this point, so I'll send it for review.

• Can't see the brush on black background cursor

  There must be a way to toggle the cursor circular brush from black to white. When I'm trying to clone or patch on a black background, I don't see where the brush is from the cursor so that it is black. Of course, it shows well on the other colors. Is there a way to make white so I can see it on a black background? Thank you.

  pshermanfl wrote:

  Is there a way to make white so I can see it on a black background?

  No, it is an unfortunate byproduct of an attempt to improve the visibility of the cursor!

  Use the SPACEBAR to temporarily place your cursor.

• It can't open word document because an importer of appropriate chart is not found. I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. __

  Cannot open word document because a

  "appropriate graphics importer is not found."

  I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. Can you direct me while I have when I want the word docuents to open they will be?

  Right click on the saved file.
  Select: Open with on the shortcut menu.
  Click: Choose [default] program
  Letter: Microsoft Word
  Check: Always use the selected program to open this type of file.
  Click OK.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  Is it possible to create a shuttle component in Oracle ADF, where the available and selected lists are tables of the adf?

  
  

  
  

  I did a POC sample on it. I can share with you. I can't put in my dropbox because dropbox is blocked in my network. Share your email. I'll send the POC through

• Using arrary associative as parameter and passing then to the place where the clause of the select statement

  Hello

  I have this scenario where I have to pass multiple values to a parameter of a procedure of monkey and then collect in another variable (the lines can be multiple).

  The parameter must be used in the where clause of the statement select here I create a sample table for the problem.

  Create table test_tab (number of trans_id, cmts varchar2 (50));

  insert into test_tab values (568890112115, ' wnlb-CMTS-11-04' ");

  insert into test_tab values (568890112115, ' wnlb-CMTS-11-04' ");

  insert into test_tab values (568890112115, ' wnlb-CMTS-11-01' ");

  insert into test_tab values (568890112115, ' wnlb-CMTS-11-01' ");

  insert into test_tab values (568890112115, ' wnlb-CMTS-11-01' ");

  insert into test_tab values (568890112115, ' wnlb-CMTS-12-02' ");

  insert into test_tab values (568890112115, ' wnlb-CMTS-12-02' ");

  This is so all cmts have same trans_id but different name

  This query gives the result as -

  Select the cmts, count (1)

  of test_tab

  where cmts ("wnlb-cmts-11-04','wnlb-cmts-11-01", "wnlb-CMTS-11-02'")

  and trans_id = 568890112115

  Cmts group;

  COUNTY OF CMTS

  WNLB-CMTS-11-04 2

  3 WNLB-CMTS-11-01

  Now, I want to use this query in a PLSQL block like where I can spend the CMTS collection and trans_id as a scalar variable and once again an OUTPUT parameter that holds the result of the query.

  I use OUT parameter because it will be called to the JAVA program.

  Here, I write a PACKAGE for it but it gives me compilation error!

  create or replace package CMTS_SUCCESS_FAILED_API

  is

  type t_item_name is table of index varchar2 (50) by pls_integer;

  TYPE t_cmts_count () IS RENDERING

  CMTS VARCHAR2 (30),

  number of NUMBER

  );

  type t_reseg_dtl is table of index t_cmts_count by pls_integer;

  procedure CMTS_SUCCESS_FAILED_RESEG_ORDR (p_item_name t_item_name, p_trans_id in numbers, p_reseg_dtl to t_reseg_dtl);

  end CMTS_SUCCESS_FAILED_API;

  /

  Now that I have created a different PACKAGE BODY, but none don't work!

  1.

  create or replace package CMTS_SUCCESS_FAILED_API

  is

  type t_item_name is table of index varchar2 (50) by pls_integer;

  TYPE t_cmts_count () IS RENDERING

  CMTS VARCHAR2 (30),

  number of NUMBER

  );

  type t_reseg_dtl is table of index t_cmts_count by pls_integer;

  procedure CMTS_SUCCESS_FAILED_RESEG_ORDR (p_item_name t_item_name, p_trans_id in numbers, p_reseg_dtl to t_reseg_dtl);

  end;

  /

  create or replace package CMTS_SUCCESS_FAILED_API body

  is

  procedure CMTS_SUCCESS_FAILED_RESEG_ORDR (p_item_name t_item_name, p_trans_id in numbers, p_reseg_dtl to t_reseg_dtl)

  is

  Start

  I'm in p_item_name.first... p_item_name. Last

  loop

  Select the cmts, count (1)

  bulk collect into p_reseg_dtl (i)

  of test_tab

  where cmts = p_item_name (i)

  and trans_id = p_trans_id

  Cmts group;

  end loop;

  for r in p_reseg_dtl.first... p_reseg_dtl. Last

  loop

  dbms_output.put_line (p_reseg_dtl (r). TRANSACTION_ID | » '|| p_reseg_dtl (r). JOB_STATUS | » '|| p_reseg_dtl (r). CMTS);

  end loop;

  end CMTS_SUCCESS_FAILED_RESEG_ORDR;

  end CMTS_SUCCESS_FAILED_API;

  While I run this procedure it is said TOO_MANY LINES.

  2.

  create or replace package CMTS_SUCCESS_FAILED_API body

  is

  procedure CMTS_SUCCESS_FAILED_RESEG_ORDR (p_item_name t_item_name, p_trans_id in numbers, p_reseg_dtl to t_reseg_dtl)

  is

  cursor c_dtl is

  Select the cmts, count (1)

  of test_tab

  where cmts = p_item_name < < error

  and trans_id = p_trans_id

  Cmts group;

  Start

  Open c_dtl;

  collect the fetch c_dtl in bulk in p_reseg_dtl;

  close c_dtl;

  -for i in p_item_name.first... p_item_name. Last

  -loop

  -end loop;

  end;

  end;

  THIS error GIVES BODY as EXPRESSION IS OF TYPE INCORRECT for where clause where I mark it as "BOLD".

  I think Miss me a small detail to add here, but I can't do even now it seems for me that I'm working on it since the morning and SQL are a little complex in real time who also write.

  
  I use-

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  Please suggest me!

  Until then I'm also working on this issue hope will find a solution.

  In the database (we show it with a standalone function, you should put it in a package):

  create or replace function CMTS_SUCCESS_FAILED_RESEG_ORDR (
    p_item_name IN SYS.DBMS_DEBUG_VC2COLL,
    p_trans_id IN number
  )
  return sys_refcursor is
    l_refcur sys_refcursor;
  begin
    open l_refcur for
      SELECT cmts , COUNT(*)
        FROM test_tab
      WHERE cmts member of p_item_name
         AND trans_id = p_trans_id
      GROUP BY cmts;
    return l_refcur;
  end CMTS_SUCCESS_FAILED_RESEG_ORDR;
  /
  

  In Java:

  import java.math.BigDecimal;
  import java.sql.CallableStatement;
  import java.sql.Connection;
  import java.sql.ResultSet;
  import java.sql.SQLException;
  
  import oracle.jdbc.OracleCallableStatement;
  import oracle.jdbc.OracleTypes;
  import oracle.jdbc.pool.OracleDataSource;
  import oracle.sql.ARRAY;
  import oracle.sql.ArrayDescriptor;
  
  public class SQLCollection {
  
      public static void main(String[] args) throws SQLException {
  
          System.out.println("Class SQLCollection started.");
  
          OracleDataSource ods = null;
          Connection conn = null;
          CallableStatement cs = null;
          ResultSet rset = null;
  
          try {
              ods = new OracleDataSource();
              String url = "jdbc:oracle:thin:@//127.0.0.1:1522/orcl.localdomain";
              ods.setURL(url);
              ods.setUser("stew");
              ods.setPassword("stew");
              conn = ods.getConnection();
              conn.setAutoCommit(false);
  
              ArrayDescriptor oracleVarchar2Collection =
                  ArrayDescriptor.createDescriptor("SYS.DBMS_DEBUG_VC2COLL", conn);
              String[] inset = new String[2];
              inset[0] = "wnlb-cmts-11-04";
              inset[1] = "wnlb-cmts-11-01";
              ARRAY ora_inset = new ARRAY(oracleVarchar2Collection, conn, inset);
  
              cs = conn.prepareCall("begin ? := CMTS_SUCCESS_FAILED_RESEG_ORDR(?, ?); end;");
              cs.registerOutParameter(1, OracleTypes.CURSOR);
              cs.setArray(2, ora_inset);
              cs.setBigDecimal(3, new BigDecimal("568890112115"));
              cs.execute();
  
              // Dump the cursor
              rset = ((OracleCallableStatement)cs).getCursor(1);
              while (rset.next())
                  System.out.println(rset.getString(1) + ": " + rset.getInt(2));
  
          } catch (Exception e) {
              e.printStackTrace();
          } finally {
              if (rset != null) {
                  rset.close();
              }
              if (cs != null) {
                  cs.close();
              }
              if (conn != null) {
                  conn.close();
              }
              System.out.println("Class SQLCollection ended.");
          }
      }
  }
  

• Brush in the new selection and Mode mask

  I used sometimes change masks of paint on shades of gray (less than 100% opacity) mask or using the brush in overlay or other modes.  Is it possible to change the opacity of the brush or mode in the new workspace selection and mask?  Thank you!

  No, the method of selection and the mask does not have these features, but you can always do with normal brushes.

• I want to auto generate a word from a PDF document. Firstly, the OCR must identify the document. Then I want to be able to select the character 'areas' where the text will be different by document according to the document. Again, I want this automated pr

  I want to auto generate a word from a PDF document. Firstly, the OCR must identify the document. Then I want to be able to select the character 'areas' where the text will be different by document according to the document. Again, I want this automated process.

  We have many forms in our records. From these forms, we generate a list of documents that fully represents what is in the file. To create a list of accurate documentation of a specific file, I have to manually go page-by-page, extract specific information (they are in the same place) and the list of documents manually. I want to automate this process.

  The function of OCR in Acrobat does not 'zone' OCR.

  Server as "automation" is not supported by Acrobat (by license and by design). Acrobat is a desktop application, and so many activities can be "automated" via Acrobat JavaScript and Acrobat Actions (a feature of the 'Pro' version) a hot body will have to be available to keep things moving along.

  From what write you it's maybe that your specific needs would be better served by a category Server product. To research these remember Bing / Google is your friend.

  Be well...

• I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if that brings the circle/round view form, but does not work.  All the I

  I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if it carries the form circle/round in sight, but it does not work.  All I get is a focus.  Can anyone help with this please.  Thank you.

  Remove the caps lock

• How do I avoid the accumulation of color / opacity where two brush strokes overlap?  In other words, I want to use more than one path with the Paintbrush tool, but see no additive effect where strokes overlap.  What Miss me?

  How do I avoid the accumulation of color / opacity where two brush strokes overlap?  In other words, I want to use more than one path with the Paintbrush tool, but see no additive effect where strokes overlap. 5 Lightroom

  I use it all the time. Turn your opacity, density and traffic all 100%.

  Benjamin

• After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  Cmd - H show/hide extras, deselects cmd - D.

• identify the areas where the check box is selected

  Hi all
  I have a page that contains 3 report areas, each with a checkbox column. The user has the option to select lines in each region and I need store the selected lines in a database table.
  I created the sub process to insert data into the table.
  
  BECAUSE me in 1.APEX_APPLICATION. G_F01. Count
  LOOP
  insert into tbl_name (c1, c2, c3) values (v1, APEX_APPLICATION. G_F01 (i), v3);
  END LOOP;
  
  The process is executing well and insert the data into the table. But the problem is when the user select lines in different regions, I get all the lines inserted in the tables, but I'm not able to identify which line is selected in which region. Is it possible to identify the area where the line is checked.
  
  Thanks in advance for the help.
  Kind regards
  Prasanth

  Hi Prasanth,

  Your probably using the apex_item package to generate checkboxes. So, try to change the p_idx parameter.
  In your case, it is probably p_idx-online 1. In other 2 reports put at 2 and 3 and then to the process you can extract only with in APEX_APPLICATION. G_F02 and APEX_APPLICATION. G_F03 berries.

  BR,
  Marko Goricki
  -------------------------
  http://apexbyg.blogspot.com/