Where the FPGA bitfile saved?

Similar Questions

• Where the titles are saved?

  Hi all

  I'm using CS3 and try to find where all the titles are saved.

  How can I change the saving location?

  What is the extension of the files of title?

  Thank you

  Shaul

  I remember not so CS3 changed this, but Dbl-Click on your existing of an open title there in the Titler. Then go to the toolbar and click the title > templates, which will open the Templates dialog, and if you look to the top right of title Designer Presets, there is a circle with an arrow. Click on it, then choose xxxx title save as a template. You can save any title of any project as a template. Just open the project, locate the title you want to save as a template and follow these steps. If they have changed with the CS3 version, search in the titles and then help templates.

  Good luck

  Hunt

• Where the answers are saved?

  In Live Mail, which are "replies" saved?  Looks like they must go "sent", but I guess that makes too much sense.  Any help is appreciated.  Thank you.

  You should have the title at the top bar with the words, Windows Live Mail. Below is the menu bar contains the page I referred to House, records, reviews and accounts from left to right. Under the Menu bar is the Ribbon. The content of the Ribbon changes according to the selected item in the menu bar. I don't know if there is an option to hide or show the Menu bar, but I suspect that there is no option to hide the menu bar.

  You have this arrangement?

• Cannot delete the folder where the backup is saved.

  I have recently reinstalled Windows.

  I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.

  now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.

  I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".

  Can you help me? This file is large and takes place on my hard drive.

  Hello

  1. what happens when you try to delete the folder?

  2. do you get any error code or error message?

  I suggest to try to delete the file in safe mode and check if it helps

  Start in Safe Mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also try the steps in the following Microsoft article and check if this may help.

  Why can't I delete a file or folder? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Hope the information is useful.

• I downloaded a Web file, the option I get is to save the file, but I have no idea where the file is saved. Thinking?

  It is not in the Control Panel, programs...

  It is not in the Control Panel, programs...

  It will not be subject to one of the above because you have not installed. A downloaded program must be installed. The download is probably in your download folder.

• Where the file is saved when I "save for Web?

  When I'm with 'save for web', (AI 2014 CC), I get a "Save" button, but no button "save under". " After hitting the 'Save', I can't locate the new file on my drive. What is the trick?

  John,

  Maybe it's time for the list: obviously, you should give the opportunity to the save location. unless it's a new feature just send it somewhere on the internet.

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Where the elements are saving my pictures?

  It drives me crazy. I opened a photo in iPhoto and it opens automatically in 10 items. I edit, but can't see how to save it in the same folder event in iPhoto. It is an exact copy of the original, but not the edited version. The default folder that photoshop stores to I can not find the path. It is given a weird name seriously as cTa9s1234 etc. I'm a long-time Windows user who has made the switch to Mac OS x. Please help and save my sanity.

  Hello

  I found that might be useful - I'm afraid I don't know anything about Mac

  http://barbarabrundage.com/2010/11/29/using-Photoshop-elements-9-with-iPhoto/

  It's PSE 9, but I think it's still applies to the PES 10

  Good luck

  Brian

• FPGA - try to use the screw of the replication of RIO to replace going to reset the FPGA running

  Running LabVIEW 12.1

  We have an application that uses an FPGA that was compiled in Run to Reset (works on any reset or power on).  Sometimes we need to update the image on the RT and FPGA and I downloaded the NI RIO replication screw.

  The problem I have now is that when I got to download the bitfile on the Flash FPGA on the sbRIO9636, I get the following error:

  Error-61141

  Possible reasons:

  LabVIEW FPGA: The operation could not be performed because the FPGA is busy. Stop all activity on the FPGA before asking this operation. If the target is in the Interface of Scan program mode, put in FPGA Interface programming mode.

  My updater is stand alone EXE.  He isn't able to get a link to the FPGA, because we are not sure what Bitfile currently is on a particular system.  I tried using the open FPGA reference and load a VACUUM on the FPGA bitfile by setting the FPGA to RUN when he sound the FPGA VI of the Open reference - and it works for me to erase the bitfile.  It does not allow me to immediately after run the bitfile VI of replication of RIO download - even if I close and reset the FPGA before trying to download the Bitfile for the RIO Flash.

  I have to first delete the existing bitfile, then load a new?

  Well, I found what I consider as a workaround - but maybe it's required to do things - but it doesn't seem like it should be, since the RIO device Setup.exe is able to flash or clear the bitfile regardless of the State of the FPGA.

  What I've done is to define the FPGA to "do not load automatically on re" then call the RT Config screw system and order a restart of the system.  The RT operating system restarts and then restarts the RIO system and this ensures that the FPGA is not busy.  Then I'm able to erase them or write about a new bitfile for the RIO Flash and set the "Automatic loading on any Reset" Rio de JANEIRO and restart the system again.

  Our current situation, it will work.  Long time restarts do a bit of headache.

• Disabling photoshop to open the window after saving a file

  Whenever I export a PNG file, photoshop opens the folder where the file was saved. I want to turn it off. I noticed that this causes a problem on my Windows, all files that are opened in a new window despite the option file says: open in the same window.

  I had this problem in Windows for some time, and recently I found out that this is caused by Photoshop.

  How can I disable this function?

  I think that this happens when you use the file menu > export > Quick Export in Png that I use so not. There are also preferences for export you should look. Menu file > export > export under... does not seem to open an open dialog box after registration. File menu > export > save for Web (Legacy)... will not open a dialogue after registration.

  

• TYPE A USER ID NUMBER BRINGS UP AN ID USER STORED WHICH SHOULD BE DELETED... WHERE IS STORED THIS USERID... IMPOSSIBLE TO FIND IN THE FILE OF SAVED PASSWORDS

  TYPE A USER ID NUMBER BRINGS UP A STORED USER ID AND THE PASSWORD COMBINED IN A SINGLE STATEMENT.
  IT SHOULD BE DELETED.
  IMPOSSIBLE TO FIND ALL REFERENCES TO THE WEBSITE IN THE FILE OF SAVED PASSWORDS.
  WHERE ARE STORED THE DATA COMBINED ID AND PASSWORD, AND HOW IT CAN BE CLEAR.
  THE WEB SITE IS NOT SAVE INFORMATION.

  It would be built-in to Firefox form fill.
  Click the field, and enter a character. If something comes along,
  highlight the fact that by using the arrow keys. Then press DELETE (Mac = delete the shift).
  Repeat if necessary.

• Hi people! Can someone advise me something in Lightroom please CC.  When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  Can someone advise me something in Lightroom please CC. When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  I guess you mean "Export with previous. If so, open the export page. It will be defined as "precedent".

• Where a file be saved if you open a MS Word doc as an attachment and the only select Save vice save under?

  I just changed a MS Word file that I sent to myself. Dialog box asks if you want to open or save. I chose open. I'm making updates and proceed to select save ICON (disk). I wanted to send the doc after update, but MSN does not allow to download an open file. I click save ICON new and closed the file, but when I looked for the file, it was not available. Y at - it a temporary area so that the file is saved.

  If not, then a suggestion would be to give the user a prompt to remind them that the file was not registered although check-in ICON selected constantly throughout the writing of the document.

  Thanks for your help.

  If you have an attachment to the document that you want to edit, save the attachment to your HARD disk first and then change it. After starting change it, choose Save as and you keep moving, click on save or Ctrl + S to update the changes, once again this made, set the document.

  Editing an attachment while remaining attached to an e-mail message will not save changes if there is an interruption such as you describe.

• I don't want Firefox to the files I saved in Web sites "remember" front How can I return Firefox to its old image saving habits?

  I recently got a new computer and upgraded to Firefox 8. Now, when I save an image from a website, Firefox will 'remember' and, next time I save an image, open a case at random that I saved an image in the last time I was on this site, then choose Save there. This would not be a problem if, 1) was not a folder randomly on the many I save in and (2) if I have to cancel on a picture for some reason, the next time I will save (seconds later, without leave/refresh a page), it chooses one at random to save me in and I put my files.

  I would like to get Firefox back to the previous image, saving habits, where I have to choose the folder every time, and he won't 'remember' everything that I did, as it is originally only headaches.

  The current versions of Firefox don't forget not the directory download, based on the URL, so if the URL changes then the default folder can be selected if he has not selected a folder for this server before download.

  • [889958/questions/889958]
  • [882443/questions/882443]

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• 24 v digital signal of the event from the host to the fpga power on/off

  Hello forums or

  Sheet material

  cRIO-9074

  module or 9472 digital module 24 V output c series

  To expand on the topic described,

  I want to be able send a trigger to alarm the fpga digital 9472 out that lasts 30 seconds using the operating system time real clock time on the host computer

  The way I approached this problem is that

  In the loop where the event occurs, if the event trigger is defined then the fgv has a time stamp when the event occurred is sent.

  In the loop that communicates with the control of fpga, I write to the control based on the condition that the difference of the current time checked and fgv time is 30 seconds or less, then it will send the value true, otherwise send fake and wait for the next occurrence of the event.

  The main problem after implementation of this is that 9472 led does not turn off when the false value is sent to it.

  cordially Mzamanstl

  Timer Keeper SD is a FGV so that it is written for her, once the event occurs

  So if the event occurs so timestamp is stored and then the difference of the timestamp result is<30>

  then a true value will be sent to the module of 9472

  So basically I want the light and I want to do the 24 v output for 30 seconds then turn off and wait for the next occurrence

  I think the method that I test it with is not very good, because I realize other factors that may contribute to this problem, so I think I found another way to test

  and I will try it but its will take time.

  cordially Mzamanstl