Where the packet com.durianberry.util. *?

Similar Questions

• I reinstalled Windows 8 - so where the photo come from?

  A strange, although I do not know there is a perfectly simple explanation. According to the title, I reinstalled Windows 8 completely. It's a Sony Vaio so I used the recovery mode via their button Assist, which erases all files and folders and everything installed apps etc and recovering the laptop in the same condition it left the factory.

  All right, but on the home screen on my tile Photos it is a picture of my dog that I took earlier. If everything has been cleared, where the image comes from? I have absolutely nothing added since then reinstall it and I checked all the photo related to records and there is nothing there.

  It appears with a Wi - Fi off so it's not picking up any other device. I'm totally confused as to where is this picture of. I can't find anywhere on the computer, but it's obviously there somewhere! Any ideas?

  Hello

  I apologize for the delay in response. I would like to ask you:

  • You are connected with the Microsoft Account?

  When you use a Microsoft Account, user settings are synchronized. So when you sign in with the same id on another computer, you can see the same settings that can include the image that you see as a thumbnail.

  Hope this information was useful.

• How can I make rectangular bubbles that adapt to the text inside them without the "arrow" that points to where the bubble comes to have changed?

  I do a lot of bubbles (150 +) who all text inside of them, which are distinguished by length. I want the balloons to look the same in terms of style, but I need different sizes of course for each of these texts. This means that the rectangular part of the speech bubble must adapt to the length and the width of the text on the inside, while the "arrow" to where the bubble is coming (e.g., the person who speaks) should stay the same on each bubble. So is there a way or a workaround to these bubbles "adaptation"?

  I appreciate any kind of help

  Thanks in advance!

  You can do this by using the option of automatic resizing the text block and a separate object (or 2) to the pointer / arrow.

  Create a text block that auto sizes away from the direction of the needle. Make sure that the line on the block of text is aligned to the outside. Draw a pointer with the pen tool and give it the same stroke and fill as the text block.

  Then you must carefully align endpoints of the pointer on the edge of the text block or if you want perfect-looking for joins, have endpoints of the pointer the text block overlap and cover them with another frame, filled with the same color of filling the text block.

  You may need to experiment with the position and the size of this frame obscuring so it becomes visible when the text block is resized. Here is an excerpt, you might be able to use as a starting point. Dropbox - resizing_speechbubble.idms

• You don't know where the sound comes from phones smart blackBerry

  Please help me! A week ago I received a mms whith a sound, since then, and every time I hung up after manufacturing. receive a call or Miss call this sound that was in the time mms! I deleted the mms, but it still plays.

  Today, I noticed when I go into media and open / close the video camera or a voice notes recorder, then he also plays.

  How can I remove or disable this noise?

  Hi and welcome to the forums!

  Try a traction battery (hard reset) as a first step.
  Thank you

  Bifocals

  KB02141 How to reset a BlackBerry smartphone

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• Where can I get the com.sl.utils code?

  Hello world

  I just got a project, assigned the task of this stripping for a different product, and there are several errors from the compiler to off the bat. Looks like I'm missing a class com.sl.utils that is imported. Anyone know where I can get this particular class?

  Thank you!

  DK

  which must be created by the owner of www.sl.com, but that seems unlikely.

• I have this spl55.tmp file in my Windows/temp folder. I have also several other "sp" name of files in the same folder. Where did they come from?

  I have this file in my Windows/temp folder. It is 9.8 MB. I have also several other "sp" name of files in the same folder. Where did they come from? Can I just delete them?

  Thank you

  Paul

  If I'm not mistaken reference you the files are temporary files from the print job, you made and can be deleted safely.

• Where the das value the FQDN in OME Alert Message comes from

  If I place an alert Action to OME, OME provids the details of the alert Message to the script that I defined. In the alert Message, there are several types of information, such as Service number, alert and FULL domain name.

  Now, at one customer site OME reports for appliance name and domain FULL of different values. I was wondering where the FQDN value is taken. It is something of DNS or has he just iDRAC? If it comes to the iDRAC, I can configure it? Is this something I can configue on OME or iDRAC?

  OME performs a reverse DNS lookup.

  This is a list of name resolution that OME crosses top down

  1. If the inventoried by OMSA server then the FQDN DNS name servers
  2. iDRAC name DNS (Reverse DNS lookup)
  3. iDRAC (iDRAC host name parameter) host name
  4. IP address

  If you let the iDRAC registers in the system DNS enable this check mark.

  

• How can I walk to "Send later"? It comes up all the time and then I never find where the email is gone. I never write an email that I do ' t want to send

  I never want to "Send later"! For the moment, I have email waiting and fall down 'send now' is grey and won't let me change that. Someone tell me how to recover and keep on 'Send now'.

  The Send button now turns to a send later when Thunderbird is offline. It disconnects when you order him or you lose your network connection.
  In the lower left cornet of the screen, there is an icon online/offline. It looks like 2 monitors. You can change States by clicking on this icon.

  As to where the mail goes when you click on send later, they go to the Outbox. The Outbox is under local folders.

• Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database. can you please explain, where the value in frontend comes? It differs from the flow_status_code in oe_or

  Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database.

  Where the value in the frontend is filling?

  It differs from the flow_status_code in oe_order_lines_all?

  Thanks for the correction.

  He slipped right out of my mind!

  Here is a detailed explanation of this case:

  Status of orders picked and picked partial

  Kind regards

  Bashar

• I'm trying to print using my own profile and no color management.   I have found a lead to the Adobe Color Print Utility but reached a point where he declared that she would not work with future versions of the Mac operating system.   I have Mac OS 10,11,

  I have been printing PSD images with my own profiles and color management using an Epson R2880.

  I've now changed to a Mac with OO 10.11.3 and unable to replace the color management.   I found a lead on the Adobe Color printer utility but failed and got a message saying that the utility has only worked with an earlier version of the OS 10.   Is there a way to turn this problem?

  GHK

  You don't want or need to use the old setting 'No Color Management'. Is no longer the right way to print with a custom printer profile, in the current versions of Photoshop and OS X.

  To use a custom profile to print, use the attached picture settings:

  • In the print dialog box, set the Photoshop color management menu manages colors.
  • Select your profile to the printer in the printer profile menu.
  • In the settings of printer driver Epson (under Printer Setup button) make sure that the Epson printer driver is set to the color - off management.

  

  I don't know why Adobe Color Printer Utility works in 10.11.3, because I can throw on OS X 10.10 and 10.11. But in the end, it doesn't matter, because you don't want to use it for this purpose Adobe Color Printer Utility is only to print a profiling target, no images. And it won't let you print using your custom printer profile, because the whole point of the utility is to print with no discoloration whatsoever.

• Installation of Windows Server 2008 R2 on Poweredge R820, where the hell are the drivers preinstall?

  I created a VD to install windows server 08. Readers are attached by the Bay before port hot swap, connected through SAS. Currently, it says that it can't find not all hard drives, I'm sure I need drivers preinstallation of the raid controller for the operating system to detect the drive but I can't find these drivers anywhere on the page list of the driver on http://www.dell.com/support/drivers/us/en/04/Product/poweredge-r820

  Anyone know where I can get the drivers? I checked the page twice and I can't find something that even alluded to preinstall drivers.

  What RAID SAS controller do you have?

  This will cover the H310 and H710 (using the "hard drive" version, run to extract before putting on optical/USB) - found under SAS-RAID/driver:

  www.Dell.com/.../PowerEdge-r820

  You can also use the deployment/installation embedded utility which can help to install an operating system, that includes drivers - F10 during POST.

• Kodak Hero 9.1 and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb.

  I come from Kodak Hero 9.1 bought and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb" Kodak say it of to do with Windows, but how to get assistance, an idea (which seems to have started since my last automatic download for service pack 1, maybe irrelevant)

  Hello

   

  Thanks for asking!

  When you try to install the driver for Kodak Hero 9.1 you receive 0x00003eb. error code

   

  To help you better, we need more information.

   

  When you click on the dialog box, you receive information about the error?

  To work with the issue, I suggest you follow these steps:

  Method 1: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Method 2: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Not reflected in the network system preferences utility airport settings

  Airport Express model A1264

  Airport Utility 5.6.1

  Firmware 7.6.7

  MacBook OS 10.6.8

  Hello, I am trying to sort out why the Airport utility settings are not the same as the settings in system preferences > network > airport.  If I make a change in Airport utility, it does not change the settings in advance under network options in system preferences and vice versa.  Network names are the same and all other parameters, except the IP numbers are different. (Note: when asked to "Join other network" one and only network name I entered comes up.) All this occurred as a result of a new service by satellite being installed in our premises (I'm in Australia and we have a 'NBN Satellite' service).  IP address in system preferences > network seems to be the IP number, I received when the new system has been activated and the computer that is directly connected by ethernet cable to the modem.   The IP address of the Airport utility is the Airport Express IP number.  I guess that the first IP address is correct as I can connect the MacBook to the internet via Airport. To complicate things, it is that I have the additional problem of not being able to join the network using my MacBook Pro (OS utility 10.10.5, Airport 6.3.5). I get a message telling me to another computer is using IP number again xxxxxxxx test this last (or something similar).  I did originally a default zero value through the Airport utility menu using the MacBook (actually several times), but no change in system preferences > network settings. I think I should add the MacBook Pro Airport utility on the MacBook (which I have) to join the network created on the MacBook.   I use the MacBook for the e-mail and the spread of the internet, and the MacBook Pro should be able to join the network for software and other upgrades. The Airport Express has worked without problem for at least 4 years on our old satellite service. Thanks in advance for your consideration.

  I'm trying to sort out why the Airport utility settings are not the same as the settings in system preferences > network > airport.

  Setting affects only the Airport express airport utility. They do not change anything on the computer.

  Setting in the preferences of the computer only affect the computer... They do not change anything on the express.

  IP address in system preferences > network seems to be the IP number, I received when the new system has been activated and the computer that is directly connected by ethernet cable to the modem.

  Are you a public IP address on the computer? In the old system, you most likely have a private IP address.

  The computer really should NOT directly connect a modem... only a modem which has several ethernet ie is actually a router.

  That will tend to make it more difficult to set up the express. The express should plug a pure modem... and then the computer plug in the express. In this case, the express would be the main router. (I don't like this setup but because the Express is not powerful enough for this job). As far as your express is the old N a wireless with a single ethernet port.

  Honestly, do you a favor and buy another router from apple... the extreme... If you can't afford a new Gen6 then buy a Gen5 on ebay... around $60... immensely better.

  The express can then extend the wireless... or just simply do serve airplay etc. as part of the network.

  Tell us what model is the modem (+ router?) provided to you by your ISP?

  And if you get a public IP address or private on the computer directly connected to it. We can work out the rest from there.

  I'm in Melbourne... you can email me direct if you need to. Email is on my website.

  s https://sites.Google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

• Where the hell is the extinct miracle tab?

  If I update my firefox and beta, and just at the moment where the mirror tab function is presented in the Tools menu, it disappeared again! What the hell, come on guys... I do something wrong? Or are you?

  HM tab. mirror was broken https://bugzilla.mozilla.org/show_bug.cgi?id=1110607 should be in the beta update free us 23-Dec-2014 noon Pacific time.

• where the pictures are stored

  When the photos come on an email where they are stored. And why some images upside down?

  Thunderbird is an email program and not an image editor. It may or may not understand orientation tags stored within the info of the image if the image is not sent right side up.