Second slot memory broken from the factory?

I have a HP Pavilion m6-1000eo.

My problem is when I try to add more memory that it just snaps into the second slot. I tried with a memory of my old mac and to be sure that it is not the memory that does not fit I also tried to put in the memory supplied with the computer at the secondary location. The original mem. organic pollutants persistent and at the main location with a team, but it does not work in high school.

I suspect it's something wrong with the comp. from the factory since it's as if something is in the path of memory, so it cannot slide at bottom. I hope that you can see if this is the case in the pic.

Thank you!

Hello

I don't see anything bad about the picture. You have to push the module with more pace sometimes, but be careful. Perhaps a picture angle toward the slot can bring up more.

Tags: Notebooks

Similar Questions

  • iMac vesa support 5 k only from the factory? Or I can buy one?

    I have an iMac 5 k, and I would like to know if I can by a Vesa Mount for her, or she just factory?

    Only from the factory. However, you could buy one from here: http://www.imacmount.com

  • Update the second slot memory for Satellite M100-221

    Good day, everyone!

    I'll expand the memory up to 2 GB (1 + 1 memory modules). But the second slot so that it is placed somewhere under the keyboard.
    1. exactly where?
    2. could you please help how to get it?
    I really have no desire to take apart the whole notebook!
    Maybe someone has the photos how to upgrade memory.

    Many thanks in advance.

    Maybe this page will help you http://www.irisvista.com/tech/laptops/Toshiba-Satellite-M105/take-apart-notebook-1.htm

    I have to write something. For RAM upgrade its slot on the low side and in manuals s is described how this should be done. I don't know if it is advisable to remove the keyboard because you can void the warranty valid. Maybe you should call the authorized service and clarify this before starting the disassembly procedure.

    Good luck!

  • Sent by second Outlook identity received from the main identity

    Hello Mozilla Community,

    I use Thunderbird 31.8 (1:31.8.0 + build1 - 0ubuntu0.14.04.1) on 64-bit Linux Mint 17.2 and I'm trying to set up a second identity for my Outlook account.

    I have two identities configured as an alias in Outlook, and I used both via the web client for a long time. I have the account set up in Thunderbird (IMAP, SMTP) with the main identity works very well.

    Now, I'm trying to configure the alias second in Outlook as identities in Thunderbird just to send email from the identity of the second. I configured the second identity with a name and the same email address that I have as an alias in Outlook, leaving the other default options (because they are ok for me).

    I did several tests, send emails from two identities to a gmail account that I have (and it is also configured in Thunderbird). The main identity works well but the e-mail sent by the second identity is received on the account of gmail from the main identity.

    I looked in the folder "Sent" to the Outlook account (in Thunderbird) and there are 2 emails saved for each test with the second identity: the one that says it's main identity and another who says he is the identity of the second.

    Any help would be appreciated.

    P.S.: I have sought the support of Mozilla and also google about it, without success.

    Outlook identities DO NOT WORK WITH E-MAIL CLIENTS. It's all e-mail clients, just bot Thunderbird

    Initially, I wrote an article in the knowledge base on the subject (which I need to change seriously now, I guess...) Could I interest you in this Toad?)

    No matter what you set up in your e-mail client, Outlook will converted as it passes through the SMTP server of your primary identity. They are unashamedly on the subject and claim it as a kind of safety device. But Microsoft were claiming bugs as features since the mid-1980s

  • Is it possible to remove the applications from the factory?

    I have absolutely no use for some factory applications.  And I love the calculator application I downloaded from the market not the Calc factory. app.  I was wondering if there is any way to get rid of plant applications.  Thank you!

    N °

    Remove them not free space either. They exist in the space of the ware farm, not accessible for you.

    You can remove the shortcuts, but not the entries in the alphabetical list of all applications.

  • After pressing the default from the factory to Raidar ReadyNAS Duo V2 gives the device is offline

    Yesterday, I pressed the button by default factory in Raidar. The result is today, 15 hours later, the LED and the display work correctly, but when I try to access via Raidar the message arrives: device is offline, please wait. I can stop the ReadyNAS with the button on the device but when I stand the unit with a paperclip in the reset button and the powerbutton, I can't change the menu the normal newsstand. Does anyone have an idea if it takes days to reset to factory default? The HD I use are 4 x 2 TB and 5.3.11 Firmware.

    Factory worked perfectly, after I renewed 1 HD which created a redneck during the factory default. Now everything works well again.

    Thanks for the help

  • Can not find the second slot memory on my Satellite M40x-112

    Hi people,

    I want to improve my memory, preinstalled are 2 sticks of 512 MB. In the description it is said that the maximum is 2 GB so I bought 2 x 1 GB, unfortunately I can only find a housing... Is someone can you please tell me where is the other?
    Thank you

    Welcome,
    Sebastian

    Well, I found information that one slot is USER scalable. This means that the user can upgrade the memory only in a slot located at the bottom of the unit.

    I guess that the second location is hidden somewhere under the keyboard and the keyboard should be removed first to reach the second memory location.
    But this would nullify the warranty if you would remove the keyboard by yourself.

    In my opinion, you should contact technician tan allowed for this upgrade

    Greetings

  • WMP freezes, playback and time counter freeze and after a few seconds it will start from the point where it stopped.

    Original title: WMP 11 continues to stop audio playback

    I use WMP 11 for months with no reading problems but since yesterday evening he continues to stop for about 20 seconds every five minutes or so. When she did this, WMP freezes - meter reading and time to gel and I get the hourglass - and then after 20 seconds or more, the trail starts from where it stops. What is happening on all the tracks I did not play a single. I tried 20 audio files (mp3 all) through a dozen different albums. In addition, the gap between tracks seem longer than usual. I feel that it is looking for the data and playback stops because the time it takes to find the data is longer than the amount of data he has for playback? Either way, my files are stored on an external drive, and I'm now ask to update WMP for 'monitor folders' once again.

    I also downloaded a new copy of WMP 11 but this has not fixed the problem.

    I ran Fix It from Microsoft, but it has not to report any issue so I'm stumped. Any help appreciated thanks.

    Laptop Dell Inspiron 1300
    Windows XP SP 3
    WMP 11 - updates enabled
    Active Windows updates
    MSE firewall on / updates enabled

    Registry fixers never used because they can damage the file system!

    Thank you, Anoop - I notice that it is 7 - t - it too much work for XP? I'll take a look, although I found closure and restart toured (as far as the burning problem goes). Thanks for your help.

  • Can upgrade you battery during the inevitable replacement of the battery from the factory

    The inevitable death of my laptop battery occurred. I was getting an hour of battery with the ch - 484171-001 battery life, the 6 cell battery factory HP. I have to buy a new battery. My question is there an update available?  Or am I stuck with a spare identical (6-cell) battery which will only give the laptop of the same autonomy of recharge for an hour. Is there a heavier more 10/08/12 battery compatible with this format or - 6 cells is what's my phone, and that's what I have to replace it with.

    Laptop HP Pavilion dv4-2145dx

    Hello:

    Here is the link to the service manual for your laptop:

    See Chapter 3, page 3-8 for battery options you have, with the corresponding reference numbers.

    There is an option of battery 12 cells.

    http://h10032.www1.HP.com/CTG/manual/c01963667.PDF

    Paul

  • How can I burn the partition from the factory on a DVD?

    I will install W7 for a client on a computer. But the customer wanted wanted the partition recovery Vista Factory on a DVD, how do I do this? It is a dell desktop computer.

    Andreasp salvation,

     
    What is the model of your desktop?
    I suggest you use the latest Dell Backup and Recovery Manager and check if it helps.
     
     
    For more information on Dell Backup and Recovery Manager, I suggest you to contact Dell.
  • Once removed a memory stick from the hard drive, is - one of these information is stored on the hard drive?

    If I access the files on a USB key, and then remove it, all information is stored on my computer? Lilian_999

    Perhaps some may remain in the cache or shadow copy

    Files must not be stored on a memory stick, the stick must be considered as a temporary storage area.

    If you change files on a stick, they should be edited on a hard drive, then copied on the key location, or

    Not all USB keys are the same, some are literally given.

  • Re: Qosmio X 500 - 10W - how to restore the partitions from the factory?

    Hi all

    I messed up my Windows 7 64 bit system desinstalling Ubuntu default (it is a dual boot with GRUB). Now my system will not boot. I have repaired my partition table using Linux tools and therefore can access files on each partition (SYSTEM; WINDOWS and RECOVERY) which was not the case before.
    So, I consider this task fact and ok.

    But I don't know which partition has been marked as boot; hidden or whatever. There are 3 partitions on the first HARD disk that are the SYSTEM; WINDOWS and RESTORE

    -They are all PRIMARY partitions (I think so)?
    -Is the hidden SYSTEM partition?
    -What is the boot (SYSTEM or WINDOWS) partition?

    At that time, when I use the recovery CD, it detects Windows 7 disk D:\ instead of C:\

    Sorry for English, but this is not my first language
    Thank you

    Hello

    Install Ubuntu on your computer as the 2nd operating system, you have moved recovery partition. In General, it is not available more hopefully, you've done a recovery disk before partitioning. Otherwise, you can order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba for money or get Win copy of disc to do a clean install, all Toshiba drivers, you can find:

    [European Toshiba driver page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  • Need to restore hp as it came from the factory, has windows xp media edition.

    I have an old computer that crashes and I can not get the updates to install. It is also slow and I want to do a clean install and use it only for scanner and some older programs that won't work on the operating system newer windows.  Once I have restore the computer windows update won't work because it is pre sp1.  How can I manually install updates to get it back to sp3.  I don't want to waste money on a new operating system that the computer could die at any moment because it is old and has been used a lot.

    Start HERE with Sp1a so here IS for sp3

  • Only second grepping through letters from the end of a Word

    I want to convert all text located in a certain style of character of capital letters at the beginning of Word. A script by a man named Peter... can perform the conversion, but I grep' disputed ed and can not handle the selection. Thank you!

    Example:

    HELLO Hello convert

    Thank you!

    I found it! Negative look back allows to eliminate the first character of each word (?)

    Then use the script to change all lowercase. Damn!

  • How can WX 60, I copy photos on my PC without removing the memory card from the camera?

    I have a 60 WX, amazing camera.

    I connected the camera Multi port USB port to my portable USB hub, but still not able to transfer the images as the camera icon does not, all the software needed?

    You can visit the online user's guide for instructions. The link is http://www.docs.sony.com/release/DSC-WX60_WX80_WX200_guide_EN.pdf and you can find your help on page 210, import images to a computer. I hope this helps.

Maybe you are looking for

  • Is there a way to pay annually the iCloud?

    I do not want to pay on a monthly basis, can I pay in advance throughout the year?

  • palmOne tungsten e2

    How can I recover the files of addresses? They disappeared from my computer. Device is supported, but my concern is what is on my computer, not what is in the camera. When it is charged I'll do a hotsync - but why the files disappear?

  • Turn off the power of airplane Mode?

    Hi, I have a T440p and it seems that the package dependencies of parameters Auto-setting Lenovo updated sometime in the last few days. Since then, whenever I pass in airplane mode to disable Wifi, energy mode gets automatically changed. Is it possibl

  • How can I know what is the FIFO depth host side?

    Hello. In LabVIEW FPGA, the FIFO. Method to configure you determine FIFO depth host side. If my screws have never included this method, is there a way to know how deep this FIFO has been all along? I put my deep FIFO FPGA - side being of 8 k.  How de

  • WRT160N: Changes of 40 MHz to 20 MHz channel width

    HelloIt has been long since my last post... but here I am again. I bought a Linksys WRT160N. I am running the latest firmware v3.0.03.I also have an Alienware with a Dell DW1520 (Broadcom chipset). My problem is this.I put on the router to work 20 or