Where these Acer files belong in Windows XP?

Similar Questions

• Where will the files deleted in windows xp mode 7?

  As the title suggests, where deleted in XP mode files go to?

  I deleted a file on my local C drive using the XP mode. The file did not go to the XP virtual recycling bin or windows 7 recycling bin.  The file was small and did not warn me that it does not fit in the recycling bin.

  XP mode accesses the Windows 7 files through a mapped on a virtual LAN network drive.  As you have discovered, files deleted from a mapped network drive light not in the basket on each machine.  They have completely disappeared.

  The files that you delete using Windows 7 still go in the trash.

• Where are the files save in Windows XP mode on Windows 7 pro

  Mode windows Xp when you save an image or files, where can you find the files on the local drive outside Windows xp mode using windows 7?

  Hello

  If the files have been saved in the computer of the XP mode and it does not work, that you cannot access because all of the XP-Mode computer with its data is stored on a single large file VHD.

  You can configure the Win7 & XP to share files, then you can use both, as if they were two computers on a network and access files between them when the XP Mode is running through the network.

  You can also mount the VHD XP-Mode file as a virtual drive and access part of its content, but if you make a mistake and you lose something XP Mode can get damaged.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• lack of start up programs, did a search and all the files on the hard drive, just not where they belong, running windows xp with sp3, any help would be appreciated

  all programs and files on the hard drive just not here where they belong, on windows xp with s p 3

  Hi tessagourden,

  1 have you tried all of the suggestions listed in the previous post?

  Add the previous suggestions, you can also try the system restore to the point before the attack of viruses and to check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• I was looking for where firefox downloads files from the web. Everything I can find is the download list window that has only a clear"" button.

  When I download a file from the web, I want to find it in the Windows Explorer window, but don't know where to look. (I use Windows 7 64 bit on an HP Pavillion laptop) Where is - this Firefox download files that it lists in its own small window of download, but you only allows 'Clear' the list, no copy or open, or move the file?
  Where are the actual files to?

  Map of the last file downloaded and saved

  go to the Tools Menu-> Options-> general-> downloads section-> select Radio button option 1 ' save files from "dialog box-> click the"Browse..."button "and from there you can find the exact folder hierarchy where a download was recorded recently.

  If you want to know when a download starts to download and where you want to save the download, performs the following steps:

  go to the Tools Menu-> Options-> general-> downloads section-> place checkmark on "Show the downloads window when downloading a file"-> check out of "close it when all downloads are finished"-> select Radio button Option2 'Always ask me where to save files'-> click OK.

  Check and tell if its working.

• I have this spl55.tmp file in my Windows/temp folder. I have also several other "sp" name of files in the same folder. Where did they come from?

  I have this file in my Windows/temp folder. It is 9.8 MB. I have also several other "sp" name of files in the same folder. Where did they come from? Can I just delete them?

  Thank you

  Paul

  If I'm not mistaken reference you the files are temporary files from the print job, you made and can be deleted safely.

• where can I get the drivers for multimedia Audio Controller for acer aspire M1100 for Windows Vista?

  where can I get the drivers for multimedia Audio Controller for acer aspire M1100 for Windows Vista?

  http://global-download.Acer.com/GDFiles/driver/audio/Audio_Realtek_1.64_Vistax86.zip?acerid=633645733675954948&STEP1=desktop&Step2=aspire&step3=AspireM1100&OS=v10&LC=en&BC=Acer&SC=PA_6

  Tricky

• Windows Vista - where are the files (contacts and folders) to Windows Live Mail?

  I had to restore Windows Vista and the files that I backed up online.  Where are the files (contacts and folders) to Windows Live Mail?

  They are stored here. C:\Users\(User Name) \AppData\Local\Microsoft\Windows Live Mail

• Where are the files of Windows Mail messages and contacts stored in Windows 7?

  I backed up a Windows 7 system and restored to factory State by doing a restore of the system because the system has been seriously infected by viruses.  I couldn't do the export before the system recovery.

  Now, given the Windows 7 system restore brand new I am trying to restore Windows Mail account.  In fact, I can't tell if it was a front window Mail or Windows Live Mail.  I don't know if the locations of the files for messages and contacts of these two letters are different.

  When I go to c:\users\%username%\AppData\Local\Microsoft\, I don't see Windows Live Mail but Windows Mail.  So does that mean it was a Windows Mail system not a before Windows Live Mail System.  I copied the files saved in Windows Mail system on the same path directory in the newly recovered system, but it doesn't seem to make a difference when I open Windows Live Mail, which is the only e-mail program on the newly recovered Windows 7 system.

  Can someone confirm the locations of the files to messages and contacts, Windows Mail and Windows Live Mail in the operating system Windows 7 home.  Can I just copy the files on?  With Outlook 2007 and 2010, she usually works if I simply copy the files or import from the saved file.  Also should which file names be so that I can easily identify them?  Are the mail accounts and password setup to re - enter as Outlook 2007/2010 or are stored in the files I can simply copy to the new system?

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• I can't save my PDF files. When I hit Save as an empty window appears instead of a menu of files or folders Windows Explorer view. I'm a Publisher and save files under new names of files after changing them. Why can't I just save these files in Adobe DC (

  I run Acrobat Professional so that I can change/brand place/comment in the PDF files. At one point recently I noticed "Acrobat Reader DC" in the name of the file at the top of the page. I do not have ask this or do anything to get there that I was aware of this. I adjusted for the new look of the screen and edited several files without incident. But yesterday, I opened a large file which had been addressed to me in Dropbox. When I downloaded and opened it and tried to change it, the selection tool was not aligned properly, so the selected areas were elsewhere on the page, where the cursor was. I restarted my computer and was able to change the file more or less normally (I noticed more little glitches with this CD player but I can live with them). But when tried to save the file with a new file name, like I always do to differentiate files that changed since the original files, the save window is empty. There is no option to save the file with a new file name. In fact. There is no option to save the file with the changes! I thought maybe it was a problem with this file only, but when I tried to edit a file provided by regular e-mail, I met the same problem trying to save to a new file name. What is the relationship between my old Acrobat Professional and Acrobat Reader DC? Why can't save files normally? I managed to save the changes I did by saving it in the cloud to Adobe (I had to then because I could not send the file by e-mail because of its size - I tried to send it to me)., but I'd rather widely navigate in Windows Explorer to work with files. I suspect that there is some simple aspects about what I am simply absent or do not know. Can anyone help?

  Hi Nathalie,.

  Please take a look at this thread and let us know if we get to the brand:

  "Save as" box pop up does not allow me to save the document.

  Best,

  Sara

• Bridge CC Extensions, so where is this file is on a Windows 7 64?

  Maybe I'm the * but whenever lately is something else, something new with CC, things came out to set up another, things are completely out, later added again by special downloads and you have to go and search for the file just copy and paste files and so on and so forth... I've already lost several hours per each time research on the necessary information, files, patches until I can actually do something!

  Now, I had to do for school, an assignment, a Board-contact-we needed to export import Bridge-Photoshop to create a video wall. At school, we are on the CS6 where contactsheets and PDF, creating in Bridge without problem, now at home running on CC, I'm a little fu... d, after some research I find following message,

  for now, I'm afraid that you have to keep your CS6 Bridge on your computer and use it to generate contact sheets (on my Mac I have to close the bridge CC before I can use Bridge CS6).

  -bad news: bridge CC help online explains that in the current version of the output Module Adobe is not available more and so it does not support generating contact sheets: "functionality to create contacts, PDFs and web galleries is available . e in Adobe Photoshop and Adobe Lightroom, which are included in your subscription to creative cloud. "Generate Photoshop contact sheets is a mess. He is not comfortable Bridge CS5/6, results are not predictable and the time it takes is not acceptable. Using a fast Mac Pro with 2 x 3 GB quad-core has taken over an hour and a half to create contacts off folder o with 140 files - bridge was done in a few minutes. Let's hope for the Adobe developers, working on bridge CC to make things easy!

  
  

  After doin some additional research I find this:

  Install the Adobe Output Module

  During the expedition of bridge CC, it does not include the Adobe Output Module, which allows to create web galleries and PDF presentations. Adobe Output Module is now available for bridge CC.

  Make sure that you have the latest version of the installed bridge CC. To check for updates, choose Help > updates in Bridge. Follow the instructions to install the updates.

  Download the file appropriate below by right-clicking (Windows) or Ctrl + key (Mac OS) and choose to save the file. Save the file in a location that you remember, such as your desktop.

  
  

  So far no problem, following the instructions in the hope that my problem has been resolved,
  

  Copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the bridge CC Extensions folder in the appropriate location:

  • Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions

  
  

  What do you think? Of course, everything is in my paths unless of course the file I needed, THE Bridge CC Extensions, so where is this file is on a Windows 7 64?
  Added to clarify things a screenshot of the path c:...

  So any idea how to solve this problem would be appreciated. See you soon
  

  

  The screenshot shows that you are in Program Files > Adobe...

  You need to Program Files > common files > Adobe >...

• Windows need to install files to add windows to new Mac.

  Fan of my Pavilion dv6-2173 quit like the portable unit. There is no way to restart it without replacing the fan that I was going to do, so I bought a new MacBook Pro. The hard drive on the HP was fine, so I removed and got an envelope to make it an auxiliary hard drive. And I want to capture all my data files. Unfortunately, I can't find them. The drive reads very well and all subdirectories arcane of Windows appear, but I can't find the library or my personal data. I talked to Apple and they said that I probably need to use Boot Camp, capture a Windows 7 or 8 ISO file and a Windows OEM Installer (it's HP). I run into a few roadblocks, trying to put all these things together. Boot Camp was easy because it is already preloaded in the MAC, but I'm having trouble finding an ISO of Windows on the Microsoft Web site and can't find a WIndows 7 / 8 installer from the HP site.  Then... of ideas?

  I was able to capture the data using the laptop of my grandson and move it across to another remote drive with FAT32 format. But it took five hours. His computer wouldn't let me access the data until I gave her administrative ok for each of the major directories. He has then spent hours clicking on each file before displaying the contents of the directory. It was taking so long with the green bar and drive hard madly flashing I thought it hung. On the advice of my wife, I contacted a House local tech. A very nice boy said that the process takes a long time and the flashing green bar means it is working properly. So, I took the laptop to my basement store where I could keep an eye on it while working on my model railroad. In three hours the files appeared and I was able to start the transfer of the directories. The root directory of my image was 39 000 images. Yet once, this forum has been the one who has the right answer.

• Deleting files in the Windows folder.

  I have $NtuninstalKB... files $ in my Windows folder. I could delete them without affecting Windows?

  P S long

  You can remove them without making the overall Windows operatin, the question is why do you want to do this?

  I can only guess one of two things...

  (1) you're obsessed with cleaning the Windows folder (and all the others.)  A compulsion.

  (2) you are trying to free up as much space as possible for some reason any.

  Whatever it is...

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

• When I start windows xp I have a dll file message:C:\WINDOWS\arimajapimogud.dll lack

  When I start windows xp I have a dll file message:C:\WINDOWS\arimajapimogud.dll lack

  Where can I find this file to download?

  Thank you

  Bob

  When I start windows xp I have a dll file message:C:\WINDOWS\arimajapimogud.dll lack

  Where can I find this file to download?

  Thank you

  Bob

  When a Google search for a file like this arises without success (as suggested by Aleander22), this almost always means that the file is malware.

  The 'missing file' message usually indicates when the computer starts because you had an anti-malware application remove the bad real file (in your case arimajapimogud.dll) but not the mechanism that wants to load this file at system startup.

  As a first step to download, install, update and run these two free antimalware scanner:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If these analyses don't find and remove the culprit, you find it manually.

  Because it is a dll file, it can be a bit difficult to identify the calling program, because it will have a different name.  I suggest that you download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and let scanner.  When the scan is finished, click the 'connection '.  Most of the entries should be easily identifiable.  Autoruns displays a lot of information in tabs other than "logon".  Some of the elements of tabs other than the logon are critical, so do not uncheck (and certainly, do not delete) at random.

  If you see something strange, Google it.  If you are not sure of an entry in the connection tab, clear the check box next to it.  Reset.  If the message does not return, you can rerun Autoruns and 'delete' of the element that you have unchecked.  If something breaks, re - run Autoruns and put the check in the box and the item will start the next time you start Windows.

• Windows didn't start because the following file is missing or corrupt: __\WINDOWS\SYSTEM32\CONFIG\SYSTEM___YOU CAN ATTEMPT to REPAIR THIS FILE BY STARTING WINDOWS SETUP using THE ORIGINAL SETUP CD - ROM__SELECT 'r' in the first screen to start repair

  This problem is on my laptop and I can not further only the screen with the above opinion.  I don't have the original disc, since I received the laptop of my mother when she could no longer remember how to use it. I need a repair of xp, or all that it can be called and information how to fix this problem is driving nuts me to have a laptop that is faulty... Please help me.

  This problem happens almost daily.

  You can search the forums for discussions with similar problems (or the same problem) and peruse the threads where the result is a happy ending and examine everything first using these methods.  This will reduce the time to resolution and frustration.

  Something like this example:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/83d5c57f-9836-4f3a-bec8-04c7d81861d3/

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!