Where to configure clustering: on the web server or a load balancer?
Hi all
a few installation questions. I read on clusters and where to set up the pool. My main goal is to reach stickness session, session failover. but I'll ask them later when I clarify below.
If my installation is
-> Cluster WebLogic Web server, I need to install the cluster weblogic web server plugin.
If my installation is
Balancer load-> cluster WebLogic, I need to configure the LB, cos the LB must meet certain criteria.
My planned Setup is
Webserver-> LB-> cluster WebLogic. the weblogic balancing is done at LB. I'll have to set up the LB to balance to the cluster.
I think I'm NOT configure the weblogic on the correct Web server plugin?
Configuring the web server is obviously a proxy directly through the lb.
So my next qn: the configuration to the LB is to balance the weblogic cluster OR a list of all the backend .jsf page server? Assuming that my application launch page is a jsf page. Enjoy your advisor.
(a) you have little sticky on LB. On the Web server, Weblogic Plugin will take care of permanent sessions.
(b) Yes, you need to add to your weblogic.xml in the application. There will be no conflict. However, your heap memory usage will increase as you could store session information on two servers.
"Circumstances and considerations should I need a LoadBalancer in front of my weblogic cluster? --
The main reason you would use a load balancer is to keep the VIP for your application. He would charge the balance between the weservers. Also usually SSL is stopped at the level of load balancer. It helps you reach cross clutser replication etc... You can read this document... Failover and replication in a Cluster
Tags: Fusion Middleware
Similar Questions
-
PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.
Hi Graham,
If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.
In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets
I hope this helps!
Emily
-
Configure the web server and application server deployment hangs in 11.1.2.2
Hi all
I want to install Hyperion 11.1.2.2 with Oracle 11.2.0.1 database. I installed all the modules successfully.
At configuration time, I set up the Foundation Hyperion Essbase, planning and reporting with success.
But the question, when try to configure HFM and FDM EMP Configurator crashes, in HFM Web server configuration and application Web of FDM configure FDM.
I installed IIS, Oracle 32-bit and 64-bit, the Clients, and also configured DCOM.
What comments can you do on this point, if any body faced the same question.
See you soon,.
Mady
Hi all
We reinstalled hyperion again
then it works fine.
Kind regards
Mady
-
Not possible to activate the scripts on the Web server
Hello
I would like to create a page .html for Web with a bit of scripting ESP included - Services because now I understand just this:
<% for (i=0; i<3; i++) {
...some text...
} %>According to this document NOR, I first need to enable scripting:
To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.
I activated the Web server and it works OK. But there is nothing called "Scripting" in the configuration page - and the script is executed (the code is just printed in the form of simple text).
Anyone know how to activate the ESP script?
Version: LV 2012.
Best regards, Jan
Hi Jan,
In fact, you use the ESP file instead of a static HTML file. For example, if we had the static html file:
Hello world
This file can be located at something like /MyWebService/HelloWorld.html.
If I then do something like have a page to say "Hello, Jan" or "Hello, Mark" I could use ESP. In this case, your code might look like:
<>
var xname = form ['name'];
%>
Hello, @@xname
The URL of such a web method is perhaps something like jan/MyWebService/Hellovar/Jan where Jan string literal passed to the terminal of a web method that can resemble
In this example, the string "Jan" is passed to the terminal of the value of the VI. What implementation of the Web method in the spec to build his signature might look like in /Hellovar /: value.
So, back to your original question. You embed not ESP breast and the HTML document. Instead, you embed HTML inside a document of ESP and the rendering of the document in HTML format when accessing the URL of the Web method. While the paper you mentioned earlier has an example project in that you can use as a reference
-
Hello
When I open the file gateway.properties by ITTO's domain\application\peoplesoft\psigw web server directory, I see certain values that are not the same, when I open the file gateway.properties of PIA by navigating to Peopletools-> Integration Broker - > gateway configuration-> gateway.properties file. I tried to clear the web server cache, restart the web server. Even then, I see quite different values of these two places. If I do any change in one of the two places, his not reflecting only with access to another place.
Could someone delete the following point?
-I think there is only a file gateway.properties under the web server's domain. When access us the PIA file, wherever to be included in?
-Is the file stored somewhere in the database as well? where it recovers when PIA accesed?
-The two are always in sync from different modes?
-How to synchronize these two?
Thank you
Dinkar
There is only one file per domain. It is read by a web service call when you view it in the PIA. This allows you to edit files from another server. The only time they will be different, that is if the URL of your entry point to a server other than the local server.
If the URL of your entry points to the same server as your local file, then the only advantage to use the PIA to modify the file (except easy access), it is that sometimes it will update the properties in memory. Change the file in the file system requires to restart the web server for the properties to reload in memory.
-
Foundation components must be installed in the Web server.
Hi team,
An EPM 11.1.2.2 configuration as shown below can you please let me know if I should install and configure components foundation EMP to the webserver (server1).
I understand that we need to have the Foundation services in a single server which I think is where we deploy applications on the application server (Server 2). No grouping in the installation program.
client-> Server Web OHS/IHS (server 1) - > Weblogic Server (Server 2) Web application server - > essbase (Server 3).
Thanks for your time on thisIf you want to install and configure the OSH as part of EMP then Yes you'll need to extract the EMP components and run Setup.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Here's a question I'll get lucky with. I have a VI, set to be reentrant, broadcast via the web server. The main instance of the VI is never worked with: it's a clone whenever someone accesses the correct URL, and the user interacts with the newly created clone (never the main forum). A clone is able to configure and calling instrument VI when good IDs are entered, which translates to browser popups that are controllable on the end of the user (even if only one user ever does both. To clarify, many clones can be opened simultaneously for connection purposes, but that a user never interacts with the instruments that are not themselves reentrant).
If the user clicks on my Logout button in their browser, it is trivial to close these instruments other, independent and properly clean. But if the user simply click on the red X in their browser, it is non-stop and the instruments that the clone called stay open on the server, when they close.
My experience so far:
No close panel? event seems to be triggered in the clone. The clone simply cease to be.
The remote_panel_connections property doesn't seem to work properly in this case (I have not had luck so far), since it is possible that more than a clone to be active and that the main parent who is spawning clones stays running, but is not interacted with in some way.
What I need:
One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.
--------------
I would like to avoid forcing the instruments that the clone call to constantly query to see if the VI clone is present on the network. If there is no other solution, but this, I would appreciate a suggestion as to the intensive way less code and resources to implement this type of interrogation, as the instruments are really designed to be totally independent after they are called, rather than under vi.
Thanks for all comments, let me know if you need more information.
MTdev wrote:
One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.
When a VI stops running, any reference as a queue is also cancelled. You can make use of this fact. If your original clone VI could launch a second reentrant VI, which remains active, you could channel all communications to the instruments via VI second using a queue created in the first. When the first VI disappears, it will trigger an error waiting waiting VI in the second (no vote office is involved). The second VI can take all the necessary measures.
-
start the Web server in different folders
I developed a compiled VI (Smarts - Net .exe) that has been designed to operate in a specific folder (\Smarts-Net) and activated the Server Web page of Smarts - Net .html in the same folder. So far so good.
The application receives data in real time produced another of our programs and generates graphs to show "what happens".
My clients would like run multiple instances of my program for their customers, but want to isolate their customer 'A' customer 'B' so that they cannot display the data on the other. I can start my application using different IP ports so that I can have multiple views, but I want to further isolate the data of the customer in different folders.
I did a 'manager' program that will create a subfolder of the folder in my main application (\Smarts-Net) so that it would appear as "\Smarts-Net\JobA" and copy all the files in the main folder in the new subfolder. I then change the of Smarts - Net .ini file with the new pathname of the file and the new port like this number:
[Smarts-Net]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
Server.TCP.servic = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.DirectoryIndex = "index.htm"
WebServer.LogEnabled = True
WebServer.LogPath=C:\Smarts-Net\Logs\Smarts-Net.log
WebServer.MimeTypes = (a LOT of Mime types in here... I left aside for this post)
WebServer.Port = 9501
WebServer.Enabled = True
WebServer.RootPath=C:\Smarts-Net\JobA
WebServer.TcpAccess = "" + c * ' "
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAfter you change the .ini file, I start the application (Smarts - Net .exe) to the new folder.
This is where I need help. If I try to display the VI from another computer using an address like http://snape:9600/JobA/Smarts-Net.html, I get an "HTTP 404 - File not found" error. But, if I try to http://snape:9600 / Smarts - Net .html, I get the VI Panel!
Thus, it seems that I can change the Port in the .ini file, but not the RootPath. Does anyone know how to get the html to load from a different folder from the one specified when I created the application code?
Hello Steve,.
From your description it looks that the web server is already doing what you say you need for.
There is a difference between the URL path, the path that is entered in the browser and the path of file system, the location of the file on the disk.
The WebServer.RootPath token specifies the directory of the file system that corresponds to the root directory, "/", in the URL. You have specified C:\Smarts-Net\JobA as root your path so all files in this directory will be the URL of the http://mycomputer:myport / myFile. If you want the URL of http://mycomputer:myport/Logan/myFile then you need to have your root C:\Smarts-Net\ directory.
Does make sense?
Nathan
-
Activation of scripts on the Web server
I found this, but cannot locate Scripting on the Web Server: Configuration page
Activation of scripts on the Web server
To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.
http://zone.NI.com/DevZone/CDA/tut/p/ID/7738
It seems that scripting is enabled automatically.
-
Hello
I run the Web server in the os(xp pro) host and now I want to run the Web server in the guest operating system
I put things in the host operating system, follow
router setting page (shared ip settings page)
1 DHCP using OFF
2 DMZ host server using on 192.168.10.201
3. setting of virtual server 192.168.10.201 port TCP port internal external port 81 81
TCP/IP
1 use the following IP 192.168.10.201
2 gateway 192.168.10.1
3. the DNS settings of
4. on the Advanced tab > Internet connection sharing > VMware Network Adapter VMnet 8
for now, when someone tries to access my WAN IP then page host server is apear (from external network)
If I stop server Web host then cannot access my WAN IPand in VMware, I put the (Windows XP Pro)
TCP/IP configuration
1 use the following IP 192.168.88.201
2. default gateway 192.168.88.2
3. the DNS settings of
4. click the guest OS tab and click Edit > virtual network editor > NAT VMnet host is VMnet8
5. setting NAT > Port forwarding > Add >: host port 81 machine virtual ip address 192.168.88.201 port 81
and at the moment access to 192.168.88.201 in the guest operating system is ok the page is apear
but nothing is apear when try and access my WAN IP external network and if I start it the host Web server then the host page is apear that im is not the intention of
How can I make the Web server of the guest to access other networks operating system?
in the guest operating system, I can access Web server of the customer by access 192.168.10.201
but I can't access Web server of the client by typing host operating system access the 192.168.10.201
any ideas? My version of vmware's vmware-workstation - 6.5.2 for windowsHi Teayun,
Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you
http://www.VMware.com/support/
http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
WANT to 114 does not connect to the Web server
Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.
I tried everything-
1 re-install services - error cannot connect to the web server
2. Update - error cannot connect to the web server
3 give the static IP address
4 restore the default settings
I have an internet connection on all computers. Can someone give me a hint on how to get Web services to work?
Hi sbenzie,
How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?
Not yet given the information above, here's what I would try.
I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.
This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.
Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.
Now try to connect to Web Services again.
-
NAT problem for the Web server
I have configured the new cisco asa 5512. I can't access our Web site from outside. We host our internal site
This is how I configured. Internal IP of the Web server is 192.168.1.19
in the following config, I changed my public ip of the webserver to 99.99.99.99
Can someone help me with this.the Web server object networkHome 192.168.1.19NAT 99.99.99.99 static (inside, outside)NAT (inside, outside) interface static tcp www www serviceoutside_access_in tcp allowed access list any object Webserver eq wwwAccess-group outside_access_in in interface outsideIt is not open by default, but you already enabled.
Remember that all you need is a translation you have:
object network Webserver host 192.168.1.19 nat (inside,outside) static 99.99.99.99
And the list of access allowing access to desired ports:
access-list outside_access_in permit tcp any object Webserver eq www access-list outside_access_in permit tcp any object Webserver eq 8080 access-group outside_access_in in interface outside
-
PIX 501 problems with the web server internal.
I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate.
Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security.
Then I would like my setup now get help and also how to do when using other ports and SSL later.
Thanks Thomas!
6.3 (1) version PIX
interface ethernet0 10baset
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
alfta hostname
domain ciscopix.com
names of
name 192.168.1.16 TerminalPC
name 192.168.3.0 Lager
permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0
permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager
permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0
permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager
outside_cryptomap_60 ip access list allow
192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
outside_access_in tcp allowed access list all eq www
host 62.108.197.90 eq www
IP outdoor 62.108.197.90 255.255.255.192
IP address inside 192.168.1.254 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 62.108.197.10 255.255.255.255 outside
location of PDM 62.108.197.11 255.255.255.255 outside
location of PDM 192.168.1.0 255.255.255.255 inside
location of PDM TerminalPC 255.255.255.255 inside
location of PDM 192.168.2.0 255.255.255.0 outside
location of PDM Lager 255.255.255.0 outside
location of PDM 192.168.2.0 255.255.255.0 inside
location of PDM 62.108.197.137 255.255.255.255 outside
location of PDM 62.108.197.137 255.255.255.255 inside
location of PDM 195.67.210.72 255.255.255.255 outside
location of PDM 62.108.197.90 255.255.255.255 inside
PDM logging 100 information
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1
Enable http server
http 62.108.197.10 255.255.255.255 outside
http 62.108.197.11 255.255.255.255 outside
http 195.67.210.72 255.255.255.255 outside
http 192.168.1.0 255.255.255.0 inside
http 62.108.197.137 255.255.255.255 inside
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set esp strong - esp-sha-hmac
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
peer set card crypto outside_map 20 195.198.46.88
outside_map card crypto 20 the transform-set ESP-DES-MD5 value
outside_map 40 ipsec-isakmp crypto map
card crypto outside_map 40 correspondence address outside_cryptomap_40
peer set card crypto outside_map 40 62.108.197.137
outside_map card crypto 40 the transform-set ESP-DES-MD5 value
outside_map 60 ipsec-isakmp crypto map
card crypto outside_map 60 match address outside_cryptomap_60
peer set card crypto outside_map 60 195.198.46.88
card crypto outside_map 60 the transform-set ESP-DES-MD5 value
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 62.108.197.137 netmask 255.255.255.255
ISAKMP key * address 195.198.46.88 netmask 255.255.255.255
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 sha hash
10 1 ISAKMP policy group
ISAKMP life duration strategy 10 86400
part of pre authentication ISAKMP policy 20
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Telnet 192.168.1.0 255.255.255.255 inside
Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www
And a new application:
outside_access_in list access permit tcp any host 62.108.197.90 eq www
Access-group outside_access_in in interface outside
* You have the group-access above on your original configuration message, BUT not on the above post.
Don't forget to issue clear xlate after the change and also record with write mem.
Try to do this in the pix CLI instead of using PDM.
Hope this helps and let me know how you go.
Jay
-
PIX 501 in the firewall of the Web server
Hello
At the suggestion of a colleague, we bought a firewall PIX 501 to protect our new Win2003 web server and a UNIX/Oracle DB server.
I've never worked with before firewalls.
Our servers are located in a cage at the ISP and belong to us. There are only two servers providing web site. I have read the documentation in the Getting Started book and it does not answer my question.
We have 2 web sites with different IP numbers on our web server. Let's say 140.5.5.4 and 140.5.5.5. I understand that I have will redefine the numbers with the firewall (192,...) but I do not understand how the routers at the ISP will be able to route requests for two websites to the firewall when it has one IP number, say 140.5.5.1?
Any help is appreciated.
Thank you, Jerry
Jerry,
what you are referring is called port forwarding. Whether you a PIX with a public IP address 12.1.1.1 and your web servers are respectively and 12.1.1.2 12.1.1.3. Port forwarding is really a 2 step process:
* a static translation of the public IP address of the PIX (12.1.1.1) at the address of the web server (12.1.1.2)...
static (inside, outside) tcp 12.1.1.1 12.1.1.2 www www netmask 255.255.255.255 0 0
* an intermediate statement basically "all web requests should be allowed in the pix outside of the interface"...
driving permit tcp host 12.1.1.1 eq www everything
Here is a link that will help you to clarify this point:
www.Cisco.com/warp/Customer/707/28.html
This should help you get started. Regarding the basic configuration, it takes config examples on the Cisco site, if you have access CCO.
Let me know if it helps.
Rob H.
-
External HTTP >; internal to the web server
Hello
I have a router ADSL with a public IP assigned, preforming NAT. This leads to a 506th PIX which leads to a Web server. The entire interior of the ADSL is on private IP addresses.
I want to allow external users access to the Web server on port 80.
I inwardly and outwardly put up ICMP connectivity (for testing only) and it works correctly.
I created a virtual server on the ADSL router that forwards port 80 traffic to the external interface of the web server. It has worked successfully for half an hour and then something in the config changed PIX and it no longer works. Here is my config PIX
SH conf
: Saved
: Written by xxxxx at 08:41:10.001 NZST Thursday, October 13, 2005
6.3 (4) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable the encrypted password xxxxxxxx
xxxxxxxxx encrypted passwd
hostname PIX
domain ciscopix.com
clock timezone GMT
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
icmp protocol error correction
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
no names
name 192.168.5.3 PixExt
name PixInt 192.168.6.1
name 192.168.5.1 ADSLInt
name 192.168.6.2 WebExt
acl1 list access permit icmp any any echo response
access-list acl1 allow icmp all once exceed
access-list icmp permitted acl1 everything all inaccessible
acl1 list access permit tcp any host 192.168.6.2 eq www
pager lines 22
opening of session
timestamp of the record
Record being buffered memory errors
logging trap notifications
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
external IP 192.168.5.3 255.255.255.0
IP address inside 192.168.6.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.6.2 255.255.255.255 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
NAT (inside) 0 192.168.6.0 255.255.255.0 0 0
Access-group acl1 in external interface
Route outside 0.0.0.0 0.0.0.0 192.168.5.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.6.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
xxxxx xxxxxxx privilege 15 encrypted password username
Terminal width 80
Cryptochecksum:xxxx
DMZInside (config) # route sh
outside 0.0.0.0 0.0.0.0 192.168.5.1 1 ANOTHER static
outside 192.168.5.0 255.255.255.0 192.168.5.3 1 static CONNECTION
inside 192.168.6.0 255.255.255.0 192.168.6.1 1 static CONNECTION
DMZInside (config) #.
No idea where I have gone wrong?
Thank you.
you are missing this statement
public static 192.168.6.2 (Interior, exterior) 192.168.6.2
Thank you
Nadeem
Maybe you are looking for
-
Take screenshot of a portion of the front panel
Hello There is a table, a chart, and a text box on my front, Can I save a photo (.) JPEG) façade complete with the attached code, Anyway is taking just a certain part of the façade? It would be nice if there is an example to learn. Thank you very muc
-
My cpu can run Crysis smoothly?
Is someone can you please tell me how crysis will run on my computer? What kind of parameters will be the best? My specs: Intel Pentium D 3 GHz 3.25 GB OF RAM ATI Radeon HD 4670 1 GB Windows 7 Home Premium 32 bit.
-
OfficeJet Pro 8610: How to connect to the internet.
I have my printer connected with a USB cable, but the info. says I can't connect to the HP eprint site. Is there a way to do this? What info. I can find says I can't divide just the cable my computer the printer must have its own IP address. will be
-
5520 art photos: 5520 black ink questions
I would like to know if it there did nothing for known issues with the 5520. I just got back from Best Buy with a new printer HP 5660 model but I will not even open it if it is a known issue for HP. I also have the fi 5520 and I tried all the "stuff"
-
well, I bought my labtop in jan 2009 since then until now, it works just great! I recentlly downloaded a program that I bought at my school called ADOBE CREATIVE SUITE 4 now, my computer had problems such as programs crashing, not being able to acces