where we plug the camera see Gallery pictures online?

Similar Questions

• Where to plug the webcam into the Aspire 5517? I have a short.

  I don't know whether I'm on the set of law.

  I have an Acer Aspire 5517. Built in camera has been giving me problems for a while now. I'm sure he has a bad connection or short at the base of the screen or the long where the screen & unit connect. I've always been able to tap along there, and the camera would start to work, or clarify.

  Since I switched to Windows 10, and it's a pain anyway, it only gives me the chance to try to use the camera, then eventually tap the problem, before it just says: can not find the camera.

  I know by looking at the service manual, where the camera plugs at the top of the screen. I checked that it is very good.  In my view, that the problem is a connection near the hinge. Where is it connected?

  Under the keyboard. It should be or C. Try matching the color of thread.

  

• my microphone has stoped working on the headset once I plugged the camera.

  Original title: helmet does not

  My headset was working fine, after I pluged in my cam stoped working microphone. I unplugged the cam, but I cannot get my microphone to work. Any idea?

  Hello

  Thanks for choosing Microsoft Community!

  If I understand correctly, the microphone of the headset does not work.

  Please answer these questions to better understand the issue:

  1. What is the brand and model of computer headset?

  2 - does it not work on a particular application like Skype?

  We defer the following methods:

  Method 1: Run the following fix - it:

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  Method 2: See the steps mentioned below and verify that the default audio device is properly set:

  a. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.

  b. click on the recording tab, click on Microphone and then click Properties.

  c. click the levels tab and make sure the mute button is off, so now to click on it to activate the sound for this connection and then click on apply.

  d. to listen to the sounds of the microphone through your speakers or headset, click the listen tab; Click on listen to them this peripheral box.

  e. also click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral box and then click OK.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Where are stored the camera profiles?

  Using Windows 7 Ultimate 64 bit PS CS5 Extended with LR 3.

  I searched my hard drives (which are all indexed) for hours and can't find where the target profiles are stored.  Googling for answers various suggestions of folder, but none are on my machine.  I can't locate all PCL files, all files .dcp, .dcpr files.  There is no folder called lens profiles or LensCorrections no permuations of these names.  No registration in one of the Adobe directories with names of lens or camera in them.

  I also downloaded and installed the software creator of lens in the hope that he would point to where the profiles are stored, but it does not work.   I'm totally stumped.

  Where I would put a LCP for LR or PS file could find them?  Both programs display profiles for my camera and my lenses some, so you have profiles stored somewhere on my system?

  Thank you!

  Profiles of the camera and the lens are stored in

  C:\ProgramData\Adobe\CameraRaw

  on my Windows 7 64-bit computer. Windows Search won't find it because it is excluded from the index.

• Cannot import video from Sony handycam HD. start the button market orders / stop playback of the camera but no pictures or sound appear on the Editor screen.

  I can't import video from Sony Handycam HD 1080. Start button on the editor controls playback of the camera, but no image appears on the screen of the editor. Thnx

  andypfaris

  What version of Premiere Elements you are using and on what computer operating system is running?

  You doing DV or HDV firewire capture of data in a Capture of the first Hare elements window? What is your

  What is your predefined project?

  Is it a "it worked before but not now" show or "it never worked before"?

  Thank you.

  RTA

• Where to find the serial number of photoshop online download

  Where the serial number of photoshop iss online to download?

  Log in at www.adobe.com and check under my command:

  https://www.Adobe.com/account/account-orders.html

• Import and delete the photos from the camera

  The link you gave is not useful. I don't want to use the application Windows 8 photos. All I want to do is to plug my camera and have pictures, transfer in a folder of my title and delete the photo from my camera. It's an ability that were available in Windows 7 and not available in Windows 8. I am currently using Dropbox and it is slow and uses tons of data to my hotspot.

  Thank you!

  Split from: https://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/importing-and-erasing-photos-from-camera/d8ad55da-66e7-46d5-b54e-3ef0bf45e986

  Hello Joe,

  Thanks for posting your query in Microsoft Community.

  I understand that you have questions, import and delete the photos from the camera. We are happy to help you in the matter of fixing.

  You can check the below link to import photos from the camera.

  1. First, connect your digital camera, and press the Power On button. Windows 8, which will detect the camera and will install the appropriate drivers.
  2. After the driver installation is complete, the AutoPlay menu appears.
  3. Select the option import pictures using Windows.
  4. In the lower right corner of the screen, a small window asking if you want to mark photos will appear. You can type a general images you want to import. Tags can be very useful to organize and find your photos.
  5. If you do not want to insert a tag just leave this space empty and click Import.
  6. If you want to customize the import settings, click the Options button. Now you can change the following settings: where pictures import them (the default folder is pictures - if you want another folder, click Browse and select or create this folder), the name of the folder (by default the name of the folder will be the date when the images are imported over the tag you entered) and the file naming convention.
  7. When you are finished, click the OK button. These settings apply to all the photos you want to import in the future.
  8. After you click import, Windows 8 starts to move all your photos.  If you want the pictures to be removed from your camera once the import process is completed, click the Delete after import check box.
  9. Once the process is complete, start Windows Photo Gallery and you will be able to see all the photos that have been imported.
  10. Now, turn your unit off and unplug the cable to connect to your PC.

  If this does not help then, try the steps below to get the images from the camera.

  1. Go in computer.
  2. You will find the camera under portable device or removable devices.
  3. Double-click on this unit and you can copy and paste from this location and import it onto your computer.

  I hope this helps. Otherwise, feel free to write us back for assistance.

• AutoPlay no longer works for the camera!

  Also recently that 2 months ago, I was able to connect my canon rebel xti on my laptop Windows 7 x 64 and would get an autoplay prompt to import the photos.  All of a sudden now when I plug the camera in I hear the sound that the usb device is recognized and I can see the camera to the computer, but I no longer get the autoplay popup.  I went in the AutoPlay settings and reset default but still do not get the command prompt.  I can still manually launch Live Photo Gallery and import like this but I liked to get the command prompt, AutoPlay works fine for DVD, USB keys, etc but not the camera.

  If I connect the camera on my Win 7 32 bit Office the guest of AutoPlay works fine, something get corrupted on my laptop somehow?

  Well, I tell myself I will update this when everyone was waiting with a similar problem, my laptop was overheating problems and had replaced it under warranty mobo, I thought he was as good time as any which for a re - install Windows 7 costs.  So far, automatic the camera works fine.

• Transferring images from the camera to computer

  A couple of months, my computer has a virus which attacks the operating system.  I took the computer to a store of trusted computing for repair.  To eliminate the virus, technicians used a program called Combofix.

  Before the virus, all I had to do was connect my camera to a USB port on the front of the computer.  I would like to hear a Ding-Dong and pop up would be a menu asking what I would do with the photos - several options.

  After that the virus has been removed with Combofix, I tried to plug in the USB port of my camera and I hear the Ding-Dong, but the menu does not appear.

  I tried to disconnect my scanner of it's USB port and plug the camera on this port, but I get the same results... a Ding-Dong, but no context menu.

  I also have a hard drive external Buffalo for backup of photos and documents, and if I plug it into a USB port, the computer does not recognize that it is plugged.

  I tried plugging my camera into my daughter's computer and there is no problem - I get the Ding-Dong sounds and the menu appears.  I resorted to uploading my photos to my daughter's computer and have their email to me.  But that's getting old... for us two.

  In troubleshooting, it seems that there is nothing wrong with the USB ports, or is there something wrong with my camera or an external hard drive.  There must be something in the Windows XP program which is now off and not to recognize an external device, like the camera or external hard drive.

  Tell all about how to solve this problem?

  A couple of months, my computer has a virus which attacks the operating system.  I took the computer to a store of trusted computing for repair.  To eliminate the virus, technicians used a program called Combofix.

  Before the virus, all I had to do was connect my camera to a USB port on the front of the computer.  I would like to hear a Ding-Dong and pop up would be a menu asking what I would do with the photos - several options.

  After that the virus has been removed with Combofix, I tried to plug in the USB port of my camera and I hear the Ding-Dong, but the menu does not appear.

  I tried to disconnect my scanner of it's USB port and plug the camera on this port, but I get the same results... a Ding-Dong, but no context menu.

  I also have a hard drive external Buffalo for backup of photos and documents, and if I plug it into a USB port, the computer does not recognize that it is plugged.

  I tried plugging my camera into my daughter's computer and there is no problem - I get the Ding-Dong sounds and the menu appears.  I resorted to uploading my photos to my daughter's computer and have their email to me.  But that's getting old... for us two.

  In troubleshooting, it seems that there is nothing wrong with the USB ports, or is there something wrong with my camera or an external hard drive.  There must be something in the Windows XP program which is now off and not to recognize an external device, like the camera or external hard drive.

  Tell all about how to solve this problem?

  ===================================
  Maybe the following link offers a few ideas:

  (330135) the AutoRun or AutoPlay feature
  Does not work
  http://support.Microsoft.com/?kbid=330135

  Maybe the Microsoft Autoplay Repair Wizard
  worth to try:

  Download Microsoft
  AutoPlay Repair Wizard:
  http://tinyurl.com/STUs
  or...
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad&displaylang=en

  Good luck... John Inzer - MS - MVP - digital media experience

• The original driver of the camera again (which should be listed under portable devices) is missing

  I'm trying to get my Canon PowerShot A4000 IS to connect to my computer Dell Inspiron A537.  It has a Vista x 64 SP2 operating system.  When I plug the camera in I get a message that a device driver is required.   He research and can't find anything.   I contacted Canon.  They say that there should be a device driver built into Vista in the category of portable devices.  He isn't here.  I suspect that this was deleted when my daughter tried to connect his phone I some time ago.  How can I fix it?  I tried the program of Mr. Fixit in the support section.  Found problems, it could not fix them.

  All ideas

  Try this:

  Go to Device Manager and find the device that may be under 'Other devices', ' unknown devices "USB controllers" or "Hard drives" category. " It should have a yellow triangle with an exclamation mark. Right-click on it and click on "Update driver software..." The next box, click 'Browse my computer for driver software', then navigate to C:\WINDOWS\System32, click on the OK button and make sure the front box "include subfolders is selected', click 'Next' button and let windows install the driver.

• HPE-210F dead USB 2.0 port AV - where to plug them in?

  My newest HPE-210F has a USB 2.0 on the front, and he died. I opened the case, and of course, the connector it is not connected to the motherboard. I want to know where to plug the connector on the motherboard. I can attach a photo of the MB, if necessary, but I suspect it's an easy question. On a related note, there are three small openings in the metal cage where the USB port on the front is pressed. Are enough spots on the MB to plug in a few extra USB 2.0 ports? I wonder if HP sells ports ready to fit in the cage or if it is a standard of the industry and I could get them elsewhere?

  TIA!

  Pick up and empty the USB socket and plug the connector.  This motherbaord is used for different configurations of the firm.  Pocket USB and media drive bays would also use the empty USB Sockets.

• Since upgrading my iPhone 5s IOS 9.3.5 yesterday, so I can't see the camera of the iPhone as a device in Windows do not seem to be a direct way to upload my pictures on my PC.  Is it possible to download my pictures to my PC without iCloud?

  Since upgrading my iPhone 5s IOS 9.3.5 yesterday, I see more the camera of the iPhone as a device in Windows.  Therefore, with this update of IOS, I do find a direct way to upload my pictures on my PC.  Is there a way to download my photos on my PC without having to download them to iCloud?  My PC is Windows 7 Pro (64 bit).

  What I've always done, is to download my photos directly on my PC by using the option to remove the iPhone with the download.  I really want to continue to do so!

  Thank you!

  Hello

  Follow the steps here:

  • Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
  • If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• I see my pictures in my camera and when I download them to the desktop, however when I go to import into Lightroom, import can never really happens and it says there are no photos to import.  They do however I am able to import them into Photoshop.

  @I see my pictures in my camera and when I download them to the desktop, however when I go to import into Lightroom, import can never really happens and it says there are no photos to import.  They do however I am able to import them into Photoshop. What is the problem?

  It looks like you can be pretty new to Lightroom.  If this is the case, you will find Victoria Bampton useful books:

  http://www.lightroomqueen.com/

  http://www.lightroomqueen.com/QuickStart/

  John

• where is the plug for camera raw, Photoshop CS5?

  where is the plug for camera raw, Photoshop CS5?

  I can't view file on my Photoshop CS5 nikonnef

  updated ps cs5 for the latest compatible with it, cr http://www.adobe.com/downloads/updates/

  If you need a later version, you must upgrade your ps or use the dng converter.

  DNG converters:

  Win
  Mac

• I can't see my pictures on the windows Help Photo Gallery

  I have windows vista Photo Gallery, recently, that I let my daughter use my laptop and when I entered the windows photo gallery to go through my pictures to be stored on the memory stick I found that they were not evidence in the main window. However on the left side of the screen it shows tags and group photo show titles, but I can't access it. What is happened? How can I access them?

  I have really no idea what has happened to cause your
  photos of disappearing, but I wonder if you could
  Find them in your pictures folder?   Start orb / photos.

  There is a small chance that the pictures have become
  Hidden... change the following parameter may be useful to
  a try.

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Let us know if the files reappear.