Which disks are accepted during the creation of recovery disks?
Hiya
No one knows the answer to this question. I just bought a HP Pavilion dv3-2310ea and wanted to create recovery disks, as shown in the installation instructions. I used Verbatim DVD - R 4.7 Gb 16 x 120 min and the laptop wrote things on the disk, but it cannot check in the end. Thus, none of the recovery disks is possible.
I got fed up with the purchase! There is no indication on what drives exactly may or may not be used. It's a waste of money, nothing else, the inserted disc cannot be used for anything else.
Help, please.
Thank you.
Sony DVD + R is one I always get good results with and recommend here often. A search of the forum should increase several posts like yours where it has solved the problem.
Or, as suggested_contact HP and tell them your effort failed and ask a set to be sent. HP used to send em free in this case if you are still under warranty... not sure if this is still the situation.
Tags: Notebooks
Similar Questions
-
Qosimo G50 - 12G error occurs during the creation of recovery disks
Nice day
I have a Qosimo G50 - 12G and I tried several times to do disk recovery, but at some point
the following error occurs:The following file cannot be read
G:\08299Xsp4.SVM
Error message: 020150-20-00000000
Does anybode know what it means and how to fix this?
Thamks
Hello
Have you changed something on your laptop? For example, the partitions of size or do you remove any content of the recovery of HARD drive partition?
What is the G: drive in your case? Is it a partition or a CD/DVD player?
I m not very well why this error pops up, but some users here in the forum reported about errors during recovery disc creation. In most cases the use of other and different DVD helped to address this problem.
I m using the TDK DVD-R and I'm happy. -
What file formats are accepted by the creation of dvd
I can't so much by such a simple task
with XP, it worked fine. Why did you change it windows if it works don't trouble is my policy.
That's why I use Avid tools and with this new windows 7 I can't even install the drivers I am now seriously in re installation of my windows xp and windows 7 to the store for a full refund on return!
[Moved from comments]
-
Hi my name is Khaled. I live in Toronto, Ca.
I bought the toshiba laptop A300 3 months back and made recovery DVD same time :-)
But I faced a problem and tried to make recovery and I erased all the data after backup, but everything using my 1st DVD I made in the face of a problem as PREINST2. Stormwater management file is missing after about 12 minutes.My DVD is brand new without any scratches.
Also during the creation of recovery disks, there is no question, he got 100% successful.What can I do now?
I need the laptop in my very urgent studies and his...
I left the message on the 1-800-Toshiba also, but got no response :-(Help me
u can reply here and to send on [email protected]
thnxHello
Have you tried to use the HARD drive recovery process (if possible)?
Press F8, all laptop power on. Choose fix my computer.
Then a new window will open. Then you could start the HARD drive recovery.
But this will be possible only if HARD disk recovery file has not been changed.If HDD recovery is not possible, I recommend that you format the disk with a Windows XP CD.
Then try to boot from the recovery DVD Toshiba again.Check it out
-
When I try to save a playlist, I get an error message "Windows Media Player has encountered a problem during the creation or recording of the reading list.".
Hello
- Will there be any changes made prior to this issue?
- What version of Windows are you using?
Step 1: I recommend to run the Windows Media Player settings Troubleshooter and check.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Step 2: If the problem is to uninstall and reinstall Windows Media Player. Here's how.
Uninstalling and reinstalling Windows Media Player:
(A) uninstall Windows Media Player:
a. go to start and in the search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find multimedia and uncheck the brand in the face of Windows Media Player.
d. restart the computer
(B) reinstall Windows Media Player:
a. go to start and in the search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find the multimedia functions and place a check mark in front of the Windows Media Player.
d. restart the computer.
For more information, see the article below:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
-
I have a Dell XPS-8700 running Windows 7. I bought the Dell Backup and Recovery Premium Edition.
I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive. However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.
How can I create a backup of the system? Why I get this error?
Thanks for all the info. My situation sounds very similar to yours.
I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.
V1.7.1.2 downloaded and executed new facility.
When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.
As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.
However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...
In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.
-
Get the error during the creation of the type of the Schema element variable
Hello world
To create a variable of type of schema, I do the following steps...
Select 'Variables' after right-clicking on the bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type choose, I expanded the my imported schema files. And selected a type of item, and then click ok to create this variable. I get the message...
TO SAVE ANY WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED IN THE DIRECTORY OF THE CURRENT PROJECT.
Which is to say by whom.
I imported the schema files in the project. After that I imported in the WSDL file also. Now why I am getting error during the creation of the variable. However, I can create variable directly in. BPEL file, then everything is fine. And it works too. But what is average with the error above? Why I am not able to create the variable via GUI?
Thank you.Hello
I have this same problem this morning, and I was going crazy, until I found this Web page on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process | http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good with directories with spaces to work on the directory name. If you move all your work in a directory without spaces, it will work smoothly. At least, it worked for me.
Kind regards
Nacho
-
RC-00118: an error occurred during the creation of database
Pls I need help to successfully clone my database
Operating system is Linux 4.0 11.5.10.2 Application and database is 9.2.0.6
The question is try to clone the E-busines suit application using the Rapid clone. Am Note 230672.1
Whenever the adcfgclone.pl on the DB layer runs up to 70% it-error with the following message, while the database is created:
Clone of fast running with the command:
Perl /s03/FIN/findb/9.2.0/appsutil/clone/bin/adclone.pl java=/s03/FIN/findb/9.2.0/appsutil/clone/bin/... /JRE mode = apply... component stage=/s03/FIN/findb/9.2.0/appsutil/clone/bin/ = method = dbctxtg=/s03/FIN/findb/9.2.0/appsutil/FIN_aqherp.xml contextValidated = true showProgress CUSTOM dbTier
Beginning database layer apply - Thu Feb 26 14:29:24 2009
Logfile located at /s03/FIN/findb/9.2.0/appsutil/log/FIN_aqherp/ApplyDBTier_02261429.log
RC-50004: Fatal: error in ApplyDatabase:
Creating control files is not
ERROR when executing apply...
ERROR: Cannot run /s03/FIN/findb/9.2.0/appsutil/clone/bin/adclone.pl
[oracle@aqherp bin] $ vi /tmp/CloneContext_0226021337.log
[oracle@aqherp bin] $ vi /s03/FIN/findb/9.2.0/appsutil/log/FIN_aqherp/ApplyDBTier_02261429.log
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: aqherp
sDbDomain: qudrah.com
sDbPort: 1522
sDbSid: END
sDbUser: APPS
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1522:FIN
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aqherp.qudrah.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=FIN)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aqherp.qudrah.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=FIN.qudrah.com)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Connection could not be obtained; return null
Database utility - ADX finished-
RC-00118: an error occurred during the creation of database
Asked by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: control file creation failed
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:661)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:328)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:304)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
Thank you
SGSG,
Level application/database source nodes are you referring? If so, you can go ahead and run AutoConfig on the application tier.
Kind regards
Hussein -
Full backup impossible. An error occurred during the creation of the backup folder.
Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message
Full backup impossible. An error occurred during the creation of the backup folder.
Does anyone else have this problem?
Paul
How the drive is formatted?
-
In Task Manager, how can I know which processes are running in the background?
In Task Manager, how can I know which processes are running in the background?
Hello.
What exactly is your problem?
Details please! Thank you.
- When you open the Task Manager, go to processes
- under the seat of tab CPU reading 01, 02, or higher... that's how you know what programs are underway on the bottom.
Helped?
-
My 8 window is not updated and updates are appearing during the verification of updates.
Original title: updates
my 8 window is not updated and updates are appearing during the verification of updates
Please run the Windows Update Troubleshooter:
http://go.Microsoft.com/?linkid=9830262Please provide details of any problem it reports as not fixed.
-
During the creation of domestic demand, we enter the destination location, but when IR is converted to ISO how this system pick up the customer?
Hello
The location is added to the customer (internal part).
Kind regards
Isabelle Syed
-
Don't vSphere replication create control points which can be selected during the failover?
Don't vSphere replication create control points which can be selected during the failover? Or is the latest version of replication, the only option to failover?
Thank you
-MattG
No, this isn't
You CAN do this with EMC RecoverPoint (although not on a per VM level).
-
How can I change the name I entered during the creation of my my name on behalf of our company Adobe ID?
See: How can I change the name of the account on behalf of our company?
-
How will I know which pages are selected in the Pages panel?
I have a JavaScript that exports each page of the separate document as PDF file. I would do the same thing, but with a script that exports only the selected pages in the Pages table. Is there a way to tell which pages are selected in the Pages panel? Thanks in advance.
-Rick
I asked a similar question here: information on signs in Javascript
The answer, @Harbs, was not. You could do your own dialog box to allow users to select pages, but it doesn't seem to be possible to integrate with the existing this way Committee.
Maybe you are looking for
-
Envy Touchsmart: activating windows 10
I need to reinstall Windows 10 and I lost my product key. What should I do?
-
Pavilion 15 PC laptop 15-n004TX. Ubuntu "the system is running in mode low grphics.
HP Pavilion 15 PC laptop 15-n004TX. It came with ubuntu. 1 GB Radeon grphics card. I reinstalled ubuntu 14.04 completely formatted drive. After installation, on reboot, it gives the error: "The system is running in low graphics mode. Your screen, the
-
Cannot install window 10 for win 7 pc.
I had downloaded 10 window, ON A PAGE it says 10 window is ready to be installed, then shows a restart by clicking on it restarts c p as usual, but not with 10 victory & clicking again to restart 3 times, always without change. I have a pc win 7, Int
-
Is it possible to recover deleted emails or are they gone for good?
-
I am unable to install version 6 Ligthroom fatal error 34 Microsoft Visual C ++ 2008 Redistributable (x 64) package 9.0.0.6 What do I do?