Which lamp for projector H5370BD?

Similar Questions

• Media Center which hangs for minutes at a time

  I have Windows 7 Pro HAV. everything seems to work fine except Windows Media Center which hangs for minutes at a time

  Hello Bruce,.

  Thanks for the reply.

  I appreciate your patience.

  Please refer to the suggestions of Thane replied on February 2, 2010 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Media-Center-freeze/9b4147cf-A379-4534-aee7-01335e3729f9

  Please also make sure that the necessary codecs are installed.

  Reference:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  Note: Use caution when installing codecs that you find on the Internet, in particular some of the free codec packs that claim to include codecs from a wide variety of companies or organizations. Incompatibilities are known to exist with some of the components in these codec packs that can cause serious playback issues in the player and other players, lead to the corruption of the system and make it difficult for Support from Microsoft to diagnose and solve playback problems. For these reasons, we strongly discourage you from installing these codec packs, and recommend that remove you them if you have installed them and you are having problems with the player. Install only codecs, filters or plug-ins from reliable sources, authorized, such as the website of the official supplier. Even in this case, beware: some codec suppliers offer minimal customer. Before you install the components of digital media, set a system restore point. The restore point to go back to the configuration of your system, if necessary.

  Please keep us updated.

  Thank you

• I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What is the EULA

  I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What does the EULA say?

  A single user license allows you to have two machines with enabled facilities.

  Licensing and terms of use | Adobe

• HP Pavilion p6740f - DVI to HDMI Cable Receiver for projector?

  Hi all:

  I have a HP Pavilion p6740f tower base.  Tonight, I'm moving it the office upstairs in the press downstairs room.  The press room is set up with all the components, xbox360, bluray, dvr, etc. on the front of the room and the projector mounted on the ceiling, at the back of the room.  I intend to put my turn to HP Pavilion p6740f with other components on the front of the room.

  I intend using the build in Windows Media Center on my PC (Windows 7) via my xbox 360.  However, my PC is not an HDMI output.  It has a DVI output.

  My question: IF I PLUG a DVI HDMI CABLE FROM MY PC HP Pavilion p6740f, TOWARD THE RECEIVER 591 A DENON AVR, WHICH PUSHES HDMI OUT OF MY OPTOMA HD25 LV PROJECTOR, will BE THE SIGNAL BEING INTERPRETER CORRECTLY, or WILL I NEED TO BUY YEAR HDMI CARD for MY PC TO USE instead?

  Be 740 p / i, or 1080 p / i, could I care, as long as it isn't 480 I / p.

  It is a very specific question, so I intend to publish in sortiesdvd.com as well.

  Thanks for your suggestions you may have.

  Sincerely yours.

  zebrafetish2000

  He worked in the way I described, not vga adapter required. Thank you so much for the suggestion however.
  See you soon!

• which adapter for MBP 2009 (MD565LL/A)

  I just got back my 2009 mbp which I use primarily as a backup machine or to run a CD rom, now that I have a more recent tune.

  Unfortunately the person that I lent lost the power cord. It seems that I need an adapter model T in FORM 60 W magsafe power MD565LL/A. comments on this adapter on the apple forum are not so great and I remember that my original power cord was a cord in FORM of L and that he was traded for a T shaped card (which is the one that has been lost).

  because this laptop is not worth a ton of money I am unwilling to spend a lot of money on a rope (and I have two cords for my 2015 11 "air (45W magsafe model 2 model power A1436 adapter).

  • in any case, should I drop $ 79 on the apple version?

  should • I get the adapter T-shaped?

  • are there some sort of ADAPTER I could get for two cords, I have currently (mine do not match of course the laptop of 2009).

  • buy one of these used?

  Thanks for any help on this.

  Adapters of origin MagSafe (depending on model/year delivered with) could be

  L or T shape. some can be interchanged. The official notice was

  Try & get identical spare. -Note: Most recent MagSafe2 have a similar appearance

  Although not interchangeable in both directions... it can be confusing in details.

  MagSafe 60w and 85w adaptors could be used on your computer. If it is sent

  with the 60w, it would be OK to use an 85w, if he is also compatible.

  Said magsafe2, your # reference

  http://eShop.MacSales.com/search/MD565LL/A

  Macsales, owc Other Magsafe 60W for all MacBook, MacBook Pro 13 item (s)

  Sometimes, OWC macsales.com offers a selection of various Apple MagSafe

  power adapters & some batteries. The low power 45W MagSafe adapter for

  the MacBook Air should not serve on more demand another model MacBook.

  Your MacBook Pro is a former model, be sure to note that the model could use

  either the magnetic end type. I have an early MacBook which serves to confuse

  because a generic clone of dubious provenance, was given to me, with her.

  And quality is the only real issue for me. The generic has no Apple logo and

  a no doubt parts of quality below inside that can fail or hot, and so on.

  • Find the right adapter cord for your laptop Mac - Apple Support and sector

  • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

• EliteBook 8560p: which driver for this "unknow device" / ACPI\HPQ0004\3 & B1BFB68 & 0

  I have a HP EliteBook 8560p which was under Windows 7 in the past...

  And it was now migrate by "microsoft" for Windows 10... Grrr.

  When I check in the control panel to manage the drivers I see that is missing a driver:

  Unknow, ID = ACPI\HPQ0004\3 & B1BFB68 & 0

  Someone has an idea to find the right driver for Windows 10 and what is the device that is missing?

  Thank you very much.

  Best regards

  Turbo

  Check out This THREAD and look at the post of Paul.  This device is listed as HP ProtectSmart Hard Drive Protection software and it shows the download of the driver software.

• Which Explorer for XP?

  Continue to get a message to upgrade windows Explorer as explorer 8 will soon be unsupported. As I am running XP, I don't seem to have the choice for the last explore... so what can I do?  who is Ian

  You are probably referring to statements coming from Google - not Microsoft.  For example, this:

  As announced last year, we support the latest version of Google Chrome (which updates automatically as soon as it detects that there is a new version of the browser) as well as the current and previous of Firefox, Internet Explorer and Safari on one major version base continues. Whenever a new version of one of these browsers is released, we start supporting update and stop supporting the third oldest version.

  Internet Explorer 10 launches on 26/10/2012, and so we're going to stop support for Internet Explorer 8 shortly thereafter, 11/15/2012. After this date, users to access the services of Google Apps using Internet Explorer 8 will see a message recommending that they update their browser.

  As long as you have Windows XP (which itself will be unsupported after April 2014), Internet Explorer 8 is the latest version of Internet Explorer that you will be able to use.  IE 9 (and the next 10 IE) will not work under Windows XP.

  This announcement from Google seems calculated to allow IE users to switch to Google Chrome.

  You may or may not be affected, depending on whether you use Google Apps, Gmail, and Google Calendar.  See, for example, this report:

  After November 15, IE8 users may have problems with some features in Google Apps. And if previous practice is no idea, other sites and services, including Gmail and Google Calendar, may also be affected. At some point, these applications may stop working entirely in IE8.

  If you need these features in Google, you'll have to switch to later (or next to the most recent) version of Google Chrome or Firefox (it is not clear to me that Apple will continue to be available to new versions of Safari for Windows; Safari for Windows already was relegated to a place that is hard to find on the Apple site (not on the main page of Safari)).

• Which laptop for complex excel calculations?

  Hello world

  I would like to buy a new laptop. The laptop must be very powerful I've mainly use for very large, complex financial excel templates (a lot of data and number of array formulas and scenario analyses, for example monte carlo, etc.).

  I think that the Dell Precision model is very a compelling product in terms of price/performance. However, I need some advice on which card to choose.
  As I travel regularly, the laptop must not be too heavy (accuracy vs. the 5000 series 7000).

  Precision 5000: http://www.dell.com/uk/business/p/pr...emea&ref=PD_OC
  Precision 7000: http://www.dell.com/uk/business/p/pr...&ref=PD_Family

  -I certainly want more powerful processor (However, I do not think that the extra computing power Xeon processor E3 - 1535M offers compared to the Xeon processor E3 - 1505 M will be noticeable in excel).
  -Who and how much RAM? (it is sensible to choose vs 32 GB 16 GB?, I won't go to ECC or non ECC?, 2 x / 4 x 8 GB or 16 GB?)
  -What hard drive do you recommend? (of course, SSD, but there are so many options to choose from, especially with the 7000 series)

  Thank you very much for your help in advance!

  Hey top_performance,

  For the side CPU, buy everything you feel, that you can afford.  I think the i7-6820HQ is very well there *-nearly identical in performance indicators that I can find.  Xeons are generally better for loads of data in servers or complex mathematical and scientific supercomputers; for Excel, I think you'll be fine with the i7.

  Sage of the RAM: 8 GB really, is going to be good I guess.  Excel can be a bear, but in my experience, it is more likely to choke due to its coding entered kernel strikes a memory cap.  That being said - you can like shoot well for everything you can justify matched.  I've got 16 GB in my office & 12 GB in my laptop - I don't need really, but it makes feel me better.

  What about if you want to go with a single vs 8 / 16GB modules 2 x 8 / 16GB, so you really need to ask two things:
  (1) you go with the model 15 or 17?  The 17 has 4 locations of memory (2 under keyboard, 2 under lower lid) based on the user manual.
  (2) do you think you'll be upgrading later down the line?  It seems that it is a fairly easy thing to do.

  Speaking of types of RAM, I do not think that ECC is an option for you.  ECC (error correction code) is slower than non ECC simply because he has a data integrity check happens before releasing data to the rest of the system.  This is usually necessary in critical systems and servers to government/big corporation.  As it is, both of these pages product, only no ECC (n - ECC) RAM is listed.

  For the storage of your data, I agree that an SSD is the way to go.  I don't know what else, besides that Excel you on this but I'd do it not encourage anyone buying a professional system to get anything less than 500 GB (unless you unload your data off-production of external/network drives).

  Marked records 'M.2 PCIe' run on the PCI-express bus of the system - which is immensely faster than the SATA connections.  Readers who have "1 M hours MTBF" added at the end means "1 million hours average Mean Time Between Failures.  If these discs seem to indicate a better average life expectancy.

  I did some quick research on the difference between DP900 of A-Data, DP910, and OPAL records but could not find something important on what the differences are.  Slight changes of memory controller, it seems, but nothing that would indicate a significant advantage of quality rather than another.  A - Data has, as far as I know, a solid reputation.

  You said you go (obviously) with an SSD at a disk - I'd tend to agree with this choice, because I live a life nearly exclusive SSD myself.  However, in order to provide you with an informed decision, I want to emphasize that the hard drives & SSDS do not differently, but recent studies showed that SSD drives are not actually 'more reliable' than a hard drive.  When a disk hard breaks down the charges magnetic on the plateau is generally stay in place & keep your data under a certain form of recoverable state.  With SSDS, being that the data store is simply the electrons which alternates, if a failure occurs the chances of recovering you data is *-close to zero.  If the electrical load is disturbed & disappears completely, you will be GROUND.  If one NAND chip is physically damaged, you might be able to recover all data not stored on this chip damaged but you look very long professional service which is very expensive.

  ALL that being said, SSDS are more resistant to heat, cold, physical impact resistant, liquid spills and are not affected by the physical movement of the same way East of the spinning of a hard drive trays.  No matter what you decide to go with backups of good brand.  As someone who has worked with HER for 10 years now, don't want to pay the Bill of a professional data recovery.

  I hope it wasn't the overload of information for you.  I want to just that you go into this kind of purchase with both eyes open & fully abreast of all your options - these types of workstations mobile are not cheap & informed investment is a good investment.

  If something needs to be clarified, please let me know.  I hope this helps!

• Photo Collage for projector

  Hello.. I'm new to post here so please be patient if I don't do it right the first time I'm also quite new to Photoshop elements 14.

  I would like to know if there is a way to make a Photo montage in Photoshop elements 14 in a format that can be projected on a screen.

  I make collages of pictures of a series of photographs for a birthday party, which will be then projected on a screen via a computer, either from USB or disc.   I know how to make collages in 14 elements, but I don't know how to get them in a format that can be placed on a USB port or a disk.   I don't even know if you can do it, so any help would be appreciated.

  I know how to do a single photo in JPEG format, but it seems not to be collages of photos the only formats I have are PDF or PSE.  I have no idea what they are and if either one is suitable for the project that I do as this is the first time that I even did.  Once again, any help would be greatly appreciated.

  Thanks for any help, that all the world can offer.

  Found the answer in another post thanks.

• Which product for my graphics?

  So, should which product I use to create print media, Illustrator or In Design, postcards, Brochures.

  and my magnetic sign truck I re.

  

  Hey Joe,

  Your reading needs and looking at the picture you shared, I would say both. In InDesign, you can provision your postcards and brochures, but need you Illustrator to create your art, logo, design, if you need it as a vector. If you just want to use already created images then InDesign will do, if not both. I share some links how these two works, please check before decide you:

  Tutorials InDesign CC | Learn how to use InDesign CC

  Adobe InDesign for beginners

  Tutorials Illustrator CC | Learn how to use Illustrator CC

  Adobe Illustrator for beginners: 11 Tips | Creative LKD

  Kind regards

  OM

• Which cluster for the placement of DLR control VM?

  Intend to have 3 groups for a design of the NSX - calculation, cluster management (Infrastructure) and Edge? Cluster Edge willl have GSE and controllers.

  Who is the cluster recommended to place the DLR VM control, and what design considerations should be made?

  Thank you

  Ousmane

  The implementation of cluster is pretty much arbitrary as long as you have sufficient resources and groups necessary distributed port.  It would be wise to keep control of the DLR VM with the edges because it is a type of edge... Or it might be a good idea to move your DLR and the cluster in your cluster of right management controller, based on the logic function... that way the edge gateway data plane loads haveore has dedicated resources.

  With the placement of the bunch, his main concern should be the availability of resources to workloads in the cluster.  Secondarily, may give priority to the proximity of heavy workloads related? Other considerations are really just aesthetics.

  It is perhaps a good idea to examine the way which you cut the clusters.  What was your purpose behind this structure? Who is?

• A very green Question: which office for Premiere Pro

  Hi guys,.

  First of all, please go easy; I'm as green as they come. I'm looking into buying a new office for several functions, which will be video editing. I have read many suggestions on generations and systems (8gigs ram, say no to RAID 0, different graphics cards)- and most things are going over my head, so I thought out and just ask the experts on a desktop of mark.

  My current platform: I use Adobe first Pro CS4 and Photoshop on (wait for it) an old Dell Latitude D830. I am actually very happy with what did this laptop, but I'm looking for something that will take less than 20-30 minutes to render 2 minutes of video (although it never had problems running Photoshop).

  My uses: I would highlight will use the Office for Photoshop (print advertising/label of models) and Premiere Pro (5 ~ 10 minutes Youtube videos and the 45 minute DVD casual) as well as word processing and other offices of related things.

  I'm trying to keep the cost down - best around (or under) the mark of $1000 and I don't necessarily need to be on the cutting edge, as long as I can enjoy the features of Premiere Pro and make a video in less than ten years.

  I've been watching Dell desktop computers (because mine has served me well over the years). I was recommended by one of their representatives, focus on XPS 8300. I also watched the 7100. I also read recommendations on different sites for the HP options.

  My Question: According to my use is the XPS 7100 a viable option, or that I face the 8300 (or even a workstation full blown as the T1100)? And if one of these works, am I better suited with the HP (h8z HPE-510 t/HPE) price comparison?

  I appreciate any advice you can give to point me in the right direction. I feel not comfortable to build my own system (I read that most of you recommend). I just want to be sure that I do not buy a desktop computer and find crashing on me, because he can't handle what I'm asking it to do. I think something is really going to be an improvement on what I use.

  Thanks again for your help,

  -Scott

  Link for desktop video editing

  http://www.adkvideoediting.com/

• Open tabs which unused for a few minutes is no longer working and make me lose the page on what it is.

  I like to keep an eye open at all times, and Firefox has recently begun to spoil my tabs while I've never had a problem with this before. I think it started after the last update of Firefox.

  As mentioned above, if a tab remains open but unused for a few minutes while he was working in the other tabs, logo of the site next to the title of the page (for example Amazon 'a' logo with the arrow below "Your orders" for example) is replaced by the green rotation ring that usually indicates the loading, but it runs a lot faster that it did when it actually does something. When you click on the tab to open it again, it's just a blank tab and I have to manually track down the page that I was again. However, when I disconnect my computer or restart it so that the legs have the rings of green spinning on them, the next time I open Firefox once connected to my computer, it opens all tabs and the correct pages, but that if I did not click on / open one of the tabs so that they had the ring of green rotation thus making their return to blank tabs. If I click on a tab with green spinning ring (making it empty), then log start/stop and reopen Firefox on connection back to my computer, Firefox will have indeed lost the information on the page and he re - opens in a blank tab, as it was when the system is disconnected. On top of that, if the tabs are doing this fast spinning glitch green ring, he did everything I'm working on the slow race, such as making a video shift watching on Youtube. If I see that happen, I am obliged to go click on the tab (loss of his data in the process) and manually go back to the page, that I was still just once so that it stops make the green ring of fast rotation and I can watch my video smoothly, but it lasts only a few minutes before these pages start the glitch green ring once more and I have to repeat the process. Another oddity of the note is that this only happens to the tabs actually, I click on and open during each session. If I restart or disconnect my computer and connect again and restart Firefox, the green ring glitch does not reach one tabs I don't touch during my session. It happens to the tabs that I actually open this session, but it happens to every single tab that I do, I opened this session.

  It becomes very irritating and it's working in Firefox a huge concern, as happens constantly. Please fix this. Firefox has never done this to me before, so I don't understand why it's happening now. I have not downloaded or installed the new plug-ins or add-ons for Firefox, so I know I did nothing to the program to cause this.

  Thank you for picking me up in it. I look forward to hearing back as soon as POSSIBLE and to find a cure for this problem. This glitch is driving me crazy.

  The current versions of Firefox use the sessionstore-backups folder to store a few copies of the sessionstore file to make it possible to recover a few errors caused by a bad closing down.
  The 'upgrade.js with the attached version identifier are created when Firefox is updated.
  Previous versions of Firefox created the file sessionstore.bak with the attached version identifier.
  So that look OK.

  You can start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Could you possibly post your troubleshooting data?

  • https://support.Mozilla.org/KB/using+the+troubleshooting+information+page

• Which Mac for daily browsing?

  What Mac is the best option for navigation on the web every day and reliability? I want something that will last a while but won't break the Bank. I am currently looking for the Macbook, Macbook Air, and Macbook Pro. Thank you for your help.

  Any Apple computer will travel as well as any other. If you do not create, modify, or store content get the computer cheapest you can find. If I were you I visit an Apple store and try the various displays. Your browsing experience may be affected by the display that you get with your computer.

• Satellite A100-188: which driver for high definition audio bus

  I install XP Home new with all driver but a problem I have. In Device Manager, I found 1 entry:

  Modem on Bus High Definition Audio device

  what driver I need for this?

  on the Toshiba Site, I can't find a Modem driver.

  Post edited by: soumah

  Hello

  I also looked on the Toshiba site, and I found some modem drivers.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good bye