Which of the 3 Shockwave on this computer I'm supposed to be activated?

Similar Questions

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• What is the maximum memory for this computer what kind

  I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  Maximum RAM

  2 GB

  http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

  Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

  Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

  You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

  UTC/GMT is 20:35 on Saturday, May 26, 2012

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• system says I'm not an administrator, but I'm the only person on this computer.

  I use spy-bot and Norton programs to try to improve performance, and when there are questions, he says I can't recover/remove, change or change because I'm not an administrator. I'm the only person on this computer so what's the deal?

  SpyBot is not as good as it once was and has been superceeded by other free utilities. Using the module TeaTimer is not recommended

  Niether Norton or SpyBot will improve performance, in fact, they are more likely to slow down the system especially if they are both installed on demand / scan in real time

  What exactly you are trying to change/remove?

• Another computeron the network has the same IP as this computer.

  How to solve the problem in another pc using the same IP as this computer on this network.

  Whenever you get the error message, after the output of the command ipconfig/all.

  Just for some information:

  They say to contact your network administrator, they assume you're in a larger network with it professionals, for example a company.

  You are most probably obtain your address dynamically, ipconfig/all will allow me to know for sure.

• I bought photoshop in 2012 and installed on the mac, I had then. I lost the disc and need this computer. How do I install it on my new computer. Any help would be greatly appreciated. Thank you. Josh.

  I bought photoshop in 2012 and installed on the mac, I had then.  I lost the disc and need this computer. How do I install it on my new computer. Any help would be greatly appreciated. Thank you. Josh

  I hope you find the serial number... but if not, it may be worth mentioning that you can use Photoshop and Lightroom for $9.99 / month. It's a big dea; : Lightroom and Photoshop | Plan of creative photography of cloud to Adobe .

• Re: update the Bios Z830 Satellite: "this computer is not supported.

  Hello

  I replaced the Windows preinstalled with an installation of Fedora 16, - which works perfectly btw - and hope
  to solve the "Windows only Bios update problem" with a Windows 7 bootable USB drive, which works again
  great so far, but the BIOS160_EC130_WIN.exe said simply: "this computer is not supported." ...

  Any ideas appreciated.

  Bernd

  Hello

  You cannot update the BIOS under Linux and using a victory based version of the BIOS.
  You will need to use the image of preinstalled Toshiba.

• I recently bought a vista computer to an office auction. The problem is that this computer is password protect, I do not know the password. Is there a way I can fix this?

  I'm not computer. Is there a simple way, I can solve this problem?

  Hello

  Microsoft prohibits any help given in these forums to bypass or 'crack' the lost or forgotten passwords.

  Tips from Microsoft is to reinstall the operating system.

  If no disk not supplied with the computer, contact the computer manufacturer and ask them to send you a set of Vista recovery disks to reinstall the operating system.

  Normally, they do this for a small fee.

  Also ask them if you have a recovery partition on your hard drive that you can use to reinstall Vista.

  With many brands of computer, you have to press F10, F11, etc at startup to start this process.

  Ask them the exact key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• My laptop always tells me that I am user of 'limited' and I need to log in as an administrator. I am the only user of this computer at home, and I can't find out how this action.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you had only one user account, it originally was an administrator, and he has now suddenly become Standard see methods below. After return you to the system scan for malware because these things happen not magically by themselves. You will need to log on to the built-in Administrator account and make your changes. See the end of this post for the recommended user configuration.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  1 boot without failure. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Vista. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  2 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled.

  After getting things sorted, login to a different administrative account (see recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• whenever I want to open yahoo email that I have to enter the code text on this computer only

  Yahoo asks a text code to open my email whenever I try to log on to this computer. (it happens only on Mozilla) I don't have a problem with Solution Explorer.
  (it's one thing to Yahoo security to protect me against someone else is somewhere else).

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.
  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords
  • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
  • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

  This can also be stored in the local storage (DOM) or a Flash cookie.

  In case you use "clear history of Firefox closing:

  • do not delete Cookies
  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Get the error message "failed to open the group policy on this computer object' while running gpedit.msc.

  Original title: I can't run gpedit.msc

  I'm configure GPO, but I get an error message that says: "cannot open the purpose of group policy on this computer. You do not have the appropriate rights. "and then on the details, he says:"unspecified error ".

  I use Win 7 SP1 Ultimate and I'm using an administrator account.

  Any ideas?

  Here is a screenshot:

  

  Hello

  Thanks for posting your question on the forum.

  Group Policy Editor (gpedit.msc) is only in the editions Windows 8 Pro and Enterprise in Windows 8.
  See the comparative table listed here on the blog of Windows 8. Please see the Note at the bottom of the article that Windows 8 Enterprise is not listed as you can get this version of Volume License.

  For more details you can see the thread mentioned below.

  where can I find GPEdit.msc?

  Hope that the information provided is useful and let us know if you have any concerns related to Windows.

  Kind regards

• When you select a contact in your contacts list which does not use an iPhone, are the menu options for this contact that is supposed to display text green or blue?

  Hi there, this is not necessarily a problem, but I was wondering if you could awnswer this. I recently adding some new contacts to my contact list, who are both using android phones is said by the way and noticed that options for these contacts, such as: Send Message, share contact, add to Favorites, block this caller, as well as the options of call and text, are all displayed in blue text. I could have sworn at a certain point my contact options were displayed in green text for users of android and blue text only if this contact was using an iPhone. So I looked through my contacts, I needed to update some of my contacts anyway information and discovered that even the options of contact for non-iPhone users were posted in a blue text. I know that iMessage is always displayed in blue, and that regular messages always appear green, it is always the case when I text someone. I know that's really not a big deal, but still when I really could have sworn that the colors are different depending on whether my contacts using iPhones or not. Don't know if a blue font for the selection of these options would have is part of an update or not, or if it was always supposed to be the appearance of these options. If you could tell me what colors your iPhones display when you select a contact from your contact list, and if this would be something that would be possible to change if these colors are supposed to differ, it would be highly appreciated. Thank you for taking the time to read this, once again, I know this is really not very problematic, but I am always curious about it. Thanks to a bouquet.

  This text is blue, no matter that the person has an iPhone, Android phone, landline phone or not phone. Contacts don't 'knows' what kind of phone is connected to the number.