White background behind the text in Design view

Similar Questions

• Remove a white glow behind the text?

  I just installed Windows 7 today and it measures almost entirely to my taste, but I have a question; I don't know how to remove the glow behind the text on top of the different windows.

  What I'm talking about-
  http://imgur.com/0v10y.PNG
  (I apologize for the poor quality of image)

  It is not just the air very well, and I'd appreciate any help to remove.

  In my opinion, that if you can disable this feature (glow), you would not be able to read the text of title under certain circumstances.

• Whenever I start a new firefox session, the theme is blank on the bottom edge of the window, so that it has a white background behind the toolbar, it

  Well enough that I simply titled, I have a tool bar at the bottom of my window, and every time I load a new theme, it shows behind the toolbar as it normally should. However, every time I close the program and start a new session, the theme on the upper part is OK, but on the background, the theme is empty, it is impossible to read the text in the toolbar, denying completely the reason for having the theme. Load a new theme or reload the current temporarily fix it, but it comes when necessary. This translates into each theme, which I've had for since a few months, animated and static alike. How can I fix?

  Is it to use a light theme (Persona) in the style of the user interface with a background image?

  Using an extension that covers such a theme?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• White background for the text? (Win PrE9)

  Hi, is it possible to change the default "Web" titles in PrE9 of the black to white? Or do you need to draw a white rectangle?

  Thank you.

  Steve

  Draw a white rectangle background is probably the simplest solution.

  Otherwise, you can put the securities on a higher video track and put a regular white clip on the video track below them.

• How can I add background to the text in the Image?

  How can I add exact background behind the text on the pictures?

  

  Announces a form (with the marquee tool, for example) between the image and the text layer and reduce the opacity according to the needs.

• Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. How to get back to it?

  I have a problem with something in firefox, it is quite minor, but still bothers me. Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. I don't remember what I did to change this if it's my fault; If anyone knows how to get back to it, I would be grateful.

  This is the new behavior in Firefox 11.

  • Old Style of default Image: https://addons.mozilla.org/firefox/addon/old-default-image-style/

  See also:

  • [923127/questions/923127]
  • http://userstyles.org/styles/58710/Firefox-11-change-image-view-background
  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2443535

• How to edit text in Design view - that is to say get one I have instead of the arrow cursor

  DW CS6 it is a very clear basis on the question of the concept. Normally, I work in code view and have no problem. Sometimes, there is a big block of text in a paragraph that is in a div.

  I want to correct a simple typo or insert a text more directly from the view in design mode. However, almost all the time, when I click on-site I change, the cursor is an arrow and the whole div Gets a yellow border. I still have the selection arrow, not the vertical bar I have to edit.

  Sometimes I seem to fall on the right set of clicks and get the Edit bar.

  Thanks for your suggestions.

  Design mode can get quite cranky when your code contains errors.

  Check the validator to http://validator.w3.org and make sure you are working with clean code before resorting to wiping preferences, or by reinstalling config files.

  If your code is clean and it is still not allow to click your text in Design view, you may have a problem of indexing of z. I noticed on the pages that use a lot of positioning (APDivs) you can accidentally hide your text boxes with transparent/virgins areas of other elements and cause problems when trying to access this text at a later date.

  It's all guesswork without however to see your actual page.

  Could you post a link?

• Recover lost white background on the model file

  I was at work today and opened a Ps document that someone else had created. I don't know what I did (I am a relatively new user of Ps) and I don't know even how I ended up saving it. The document is superimposed on a map of site with logos, text of floor plans. etc. (so, it's too complicated for my limited time and knowledge to be able to re-import the source of the document and re - format the whole thing). When I opened first the document, all floor plans looked normal, but now there is a white background. The black outlines of the rooms are still there, but there is nothing underneath (I see the background gray and white checkerboard between the black outlines). I need to know how to make this white area again. It seems to me that perhaps I've removed a layer... maybe... I do not know...? I can not just use the fill tool to fill in the blanks in the bottom space because (a) the entire shape is not closed, so apply a fill to a single area fills the entire document and (b) I know that's not the right way to do... I'm trying to get it back to the way it is supposed to be, not only to make it look right because others in the work could still use the electronic file. Help, please!

  Thanks for your response! Someone else has replied (I posted the question twice) and told to make a new layer filled with white. I did and then my new layer behind the site rendering, and that did the trick!

• How to lighten the background of the text on the scanned image

  I scanned a scanned several documents of text of the microfiche. It was recommended that I use the option of scanning in grayscale rather than black and white, so that's what I used. The text out of the night, but the background is gray makes it difficult to read the text. I scanned the images in jpg format, but I could Reanalyze them in png or tiff. I want to know if there is a way to change the background of the gray to white to make the text more readable.

  Add a levels adjustment layer. In the properties of the levels histogram is probably look strange, but if you see a spike with nothing on the right, set the cursor to highlight it. Now move the slider shadows to the right, so that all three sliders will be bundled together.

• Hello :) I'm new to illustrator, I am trying to create a picture of coverage of facebook, when I save it in JPEG OR PNG format, it is show a white background behind my project, how can I remove it?

  Hello I'm new to illustrator, I'm trying to create a picture of coverage of facebook, when I save it in JPEG OR PNG format, it is show a white background behind my project, how can I remove it? Thank you Erin

  Erin,

  With PNG (preferably PNG24), you can check transparency and get rid of the background.

  The clear format of artwork no photo would be PNG24. It is important to create the exact size that it should be used, or it will be blurred. You can create it at this size, using points/pixel as the unit and save for Web. You can check the size of the window the size of the Image where you can also check Art Optimized.

  I fear, however, you may be out of luck: maybe the format will be changed to JPEG, and size will also change by Facebook software.

• White type in the text box with fill with transparency

  This page of color in my INDD document a lot of transparency on this - in the following stacking order:

  1. downstairs are two boxes gradients covering the entire page.

  2. next is a background photo that's an advantage to feathers.

  3. then comes my text box that floats over a part of the photo in the background. The text box is filled with a gradient purple feather. The text box contains 8.5 PT. White type (Helvetica Neue Medium).

  4. a transparent dingbat straddles a corner of the text box.

  Where the white guy is pictured in the background, a color is reflected type. I have not noted on the PDF, but of course, the work of back of the printer, you can see.

  I thought all type except automatically eliminated black?

  I pulled out the file using PDFX-3 (1.3) because my printing does service provider ' t supports the 1.4. I underdstand this version flattens transparency. I scanned "Print Production Guide for transparency" Adobe and learned that the areas of complex transparency can cause unexpected results. Is what happened here?

  When I opened the flattening of transparencies and he asked to highlight objects with 'Text of Raster-Fill and Stroke' or 'Text described', this type area is highlighted. No other boxes on this page type were noted, even where it overlaps the background photo (which has applied feather).

  Several other transparent dingbats (such as duplication of the text box) are also highlighted as 'Raster - Fill and Stroke text'. They are all on the highest layer (type).

  This isn't a disaster - it's still readable - but the details of the publication who are affected, which is important. Maybe next time I won't be as lucky. What would I do different?

  It is possible in the more recent versions of ID to the value of transparency to the object, STROKE, fill and levels of content, and I suspect that you have applied your effects to the object level. I was able to recreate what you see as well by using the gradient feather tool and in the effect controls panel and using the pen it y to the entire object. Oddly enough, once the gradient feather tool has been used I couln can't access options in the effect controls panel or in the menu object.

  In all cases, if you can, select the block of text, open the effect controls panel or object > Effects > menu feather degraded, remove the gradient feather and reapply just the filling.

  If you are not able to do so, copy the text, delete the block of text and create a new and paste back the text, and then select the image and apply the gradient feather to complete using the effect controls panel or the menu object.

• Menu Spry void ends up behind the text in the body section, do not click on

  Hi all, I'm new here to design web in general and Dreamweaver, summer study the CS5 classroom eBook.

  in any case, I have a problem with the spry menu bar. I have the navigation bar just below my head, its horizontal. And when I mouse over a menu link drop-down, menu drop down part ends by behind the text I have in the body, and I can't click on the submenu, and then the menu retracts itself, since I could not pass my mouse over it. Some tips on how to wear the spry framework forward at all and other things behind him?

  The problem here is that you are using absolute positioning without real purpose.

  Absolute positioning is based on a stacking order (z-index in CSS) to the elements of the stack on the page.

  A higher z-index covers a lower z-index.

  Your navigation div Spry has z-index: 3

  Your content div has z-index: 4

  If the content div covers the navigation div and the submenus (z-index: 3) opened under the content (z-index: 4).

  As an immediate fix, change the z index of the div of navigation to something really high such as 9999 so it will always be on top.

  As a longer term solution, remove the absolute positioning everything on the page and use floats, margin and padding to layout your page more firmly elements.

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• I use the capture tool. How dp I get rid of the white background in the photo already chiseled the part I. I just want the part chiseled with no experience at all? Any help, thanks

  I use the capture tool.   How dp I get rid of the white background in the photo already chiseled the part I. I just want the part chiseled with no experience at all?   Any help, thanks

  Although it seems to be a white border when you first fill the snip, after saving it shouldn't be present more.

  If the border remains you can remove by using the crop tool on a photo editing programs such as integrated Windows Paint program.

• white background of the screen of my HP dv9700 turns blue powder when open completely, but returns to normal when I close to halfway...

  white background of the screen of my HP dv9700 turns blue powder when open completely, but returns to normal when I close to halfway...

  Hello

  You did changes to the computer before the show?

  There seems to be a known problem with DV 9700 model; I suggest you to contact the HP support team for assistance.

  http://WWW8.HP.com/us/en/contact-HP/contact.html#